IP Library › Assignment 014754/0192
Patent Assignment
Reel/Frame 014754/0192

Change of Name

Recorded: 2003-12-11 Pages: 12
Assignor
Assignee
SNECMA MOTEURS
2 BOULEVARD DU GENERAL MARTIAL VALIN, PARIS, 75015, FRANCE
Covered Properties (268)
Blade Fixing Arrangement for a Turbomachine Rotor
Patent: 5,018,941 →
Application: 07/460,814 →
Mobile Blade for Gas Turbine Engines Providing Compensation for Bending Moments
Patent: 5,044,885 →
Application: 07/486,825 →
Mounting for Variably Settable Stator Blades in a Compressor
Patent: 5,061,152 →
Application: 07/492,992 →
Low Pressure Turbine Rotor Suspension in a Twin Hub Turbo-Engine
Patent: 5,074,109 →
Application: 07/495,992 →
High by-Pass Ratio Turbojet Engine with Counterrotating Upstream and Downstream Fans
Patent: 5,058,379 →
Application: 07/504,839 →
Heat Protective Lining for an Afterburner or Transition Duct of a Turbojet Engine
Patent: 5,069,034 →
Application: 07/521,036 →
Temporary Locking System for Variably Settable Stator Blades
Patent: 5,000,659 →
Application: 07/533,770 →
Blow-Off Device for a Bypass Gas Turbine Engine
Patent: 5,119,625 →
Application: 07/545,643 →
Electro-Magnetic Nozzle Device for Controlling a Stream of Liquid Metal Tapped from a Crucible
Patent: 5,074,532 →
Application: 07/550,491 →
Apparatus for Retouching, in Situ, Components Such as the Rotor Blades of a Turbomachine, and a Retouching Method Using the Apparatus
Patent: 5,102,221 →
Application: 07/600,813 →
Turbomachine Stator Element
Patent: 5,083,900 →
Application: 07/607,696 →
Axial Flow Turbomachine Rotor
Patent: 5,145,319 →
Application: 07/616,594 →
Segmented Hot Apparatus
Patent: 5,116,218 →
Application: 07/622,647 →
Method and Apparatus for Checking the Bonding of a Cellular Structure to a Support
Patent: 5,078,005 →
Application: 07/625,098 →
Turboshaft Engine Casing Joint with Reinforced Axial Restraint
Patent: 5,096,377 →
Application: 07/626,551 →
Process of Using Thermoplastic Paste for the Production of Foundry Mold Cores
Patent: 5,120,482 →
Application: 07/658,790 →
Wear Resistant Coatings for Engine Components and a Process for Producing Such Coatings
Patent: 5,078,837 →
Application: 07/673,459 →
Pod for a Turbofan Aero Engine of the Forward Contrafan Type Having a Very High Bypass Ratio
Patent: 5,157,915 →
Application: 07/684,213 →
Automated Apparatus and Process for Tacking Small Plates on Turbojet Engine Blades
Patent: 5,132,502 →
Application: 07/684,278 →
Regulator Having an Electrohydraulic Connection Plate
Patent: 5,094,268 →
Application: 07/684,280 →
Sealed Transmission Assembly Between Two Coaxial Shafts Mounted in Casings Which Are Fixed to Each Other
Patent: 5,195,401 →
Application: 07/710,457 →
Fixing Arrangement for Mounting an Annular Member on a Disk of a Turboshaft Engine
Patent: 5,173,024 →
Application: 07/721,838 →
Balance for Measuring the Thrust of a Turbojet Engine
Patent: 5,170,662 →
Application: 07/722,151 →
Non-Destructive Radiation Inspection Apparatus Including a Sighting Unit
Patent: 5,177,779 →
Application: 07/731,325 →
Process for Depositing an Anti-Wear Coating on Titanium Based Substrates
Patent: 5,154,816 →
Application: 07/736,381 →
Turbofan with Dynamic Vibration Damping
Patent: 5,143,517 →
Application: 07/742,010 →
Temperature Compensating Device for Turboshaft Aero-Engines
Patent: 5,157,918 →
Application: 07/744,433 →
Fuel Supply Circuit for a Turbo-Engine
Patent: 5,156,001 →
Application: 07/746,992 →
Inclusion Decanting Process for Nickel-Based Superalloys and Other Metallic Materials
Patent: 5,102,449 →
Application: 07/754,316 →
Tool for Removing Balance Weights from a Turbine
Patent: 5,177,847 →
Application: 07/756,878 →
Process and Apparatus for the Simultaneous Deposition of a Protective Coating on Internal and External Surfaces of Heat-Resistant Alloy Parts
Patent: 5,149,376 →
Application: 07/763,220 →
Powder Supply Device for the Formation of Coatings by Laser Beam Treatment
Patent: 5,182,430 →
Application: 07/774,782 →
Stemmed Blade for a Flow-Straightening Stage of a Gas Turbine Engine and Method of Fixing Said Blade
Patent: 5,236,304 →
Application: 07/806,269 →
Remote Filling Device for an Oil Tank
Patent: 5,251,661 →
Application: 07/818,129 →
Method of Making a Complex Ceramic Core for Use in Metal Casting Process
Patent: 5,249,618 →
Application: 07/827,607 →
Hollow Turbine Blade with Internal Cooling System
Patent: 5,193,980 →
Application: 07/828,104 →
Post-Combustion Device with Pivoting Flaps
Patent: 5,212,945 →
Application: 07/833,787 →
Installation and Method for Heat Treating Parts Made of a Composite Material Having a Ceramic Matrix by Using Microwave Energy
Patent: 5,365,042 →
Application: 07/848,246 →
Method of Selecting Ultrasonic Transducers for Use in Ultrasonic Inspection Apparatus
Patent: 5,229,973 →
Application: 07/866,424 →
Pod for Suspending a Turbojet Engine Unit of the Bypass Type Under the Wing of an Aircraft
Patent: 5,181,675 →
Application: 07/886,838 →
Acid Etching Bath for Titanium Alloy Components
Patent: 5,209,829 →
Application: 07/894,564 →
Nitrohydrofluoric Development Bath for Titanium Alloy Components
Patent: 5,227,035 →
Application: 07/894,566 →
Turbojet Engine Exhaust Casing with Integral Suspension Lugs
Patent: 5,259,183 →
Application: 07/899,909 →
Turbojet Engine Exhaust Casing with Integral Suspension Lugs
Patent: 5,190,245 →
Application: 07/899,913 →
Cooled Turbine Guide Vane
Patent: 5,215,431 →
Application: 07/904,024 →
Separate Inter-Blade Platform for a Bladed Rotor Disk
Patent: 5,193,982 →
Application: 07/913,707 →
Rear Hanging Structure for a Turbojet Engine
Patent: 5,238,206 →
Application: 07/929,830 →
Method and Apparatus for the Simultaneous Transmission of Separate Data Signals
Patent: 5,268,926 →
Application: 07/943,673 →
Blade Control Rod and System of Such Rods
Patent: 5,277,544 →
Application: 07/947,541 →
Operating Mechanism for Variably Settable Blades of a Turbomachine
Patent: 5,224,820 →
Application: 07/950,138 →
Axial Compressor and Method of Carrying Out Maintenance on the Axial Compressor
Patent: 5,275,532 →
Application: 07/964,074 →
Process and Apparatus for the Acquisition and Processing of Screen Images
Patent: 5,351,307 →
Application: 07/967,437 →
Turbo Aero Engine Equipped with Means Facilitating Adjustment of Plays of the Stator and Between the Stator and Rotor
Patent: 5,288,206 →
Application: 07/974,899 →
Unfolding Bolt Tightening Spanner
Patent: 5,284,071 →
Application: 07/982,941 →
Gas Turbine Blade Comprising Layers of Composite Material
Patent: 5,308,228 →
Application: 07/982,945 →
Stator for Directing the Inlet of Air Inside a Turbo-Engine and Method for Mounting a Vane of Said Stator
Patent: 5,328,327 →
Application: 07/983,231 →
Method of Manufacturing Parts Made of a Composite Material Having a Metallic Matrix
Patent: 5,419,868 →
Application: 07/985,299 →
Turbine Casing Delimiting an Annular Gas Flow Stream Divided by Radial Arms
Patent: 5,312,227 →
Application: 07/990,182 →
Variable Cycle Propulsion Engine for Supersonic Aircraft
Patent: 5,311,736 →
Application: 07/994,914 →
Turbomachine Blade Made of Composite Material
Patent: 5,292,231 →
Application: 07/999,359 →
Device for Checking the Clearances of a Gas Turbine Compressor Casing
Patent: 5,314,303 →
Application: 08/000,298 →
Method of Manufacturing a Hollow Blade for a Turboshaft Engine
Patent: 5,253,419 →
Application: 08/000,581 →
Variable Geometry Flame Trap Device for Use in an After-Burner Device of a Gas Turbine
Patent: 5,269,138 →
Application: 08/016,074 →
Sealing Means Between a Pressurized Chamber and a Lubricated Chamber
Patent: 5,445,394 →
Application: 08/024,775 →
Propulsion Engine
Patent: 5,305,600 →
Application: 08/025,780 →
Turbomachine Flow-Straightener Blade
Patent: 5,295,789 →
Application: 08/026,413 →
Cooled Turbo-Machine Vane
Patent: 5,342,172 →
Application: 08/036,685 →
Method of Fixing Stemmed Blade for a Flow-Straightening Stage of a Gas Turbine Engine
Patent: 5,319,850 →
Application: 08/045,224 →
Circuit for Ventilating Compressor and Turbine Disks
Patent: 5,327,719 →
Application: 08/049,301 →
Annular Brush Gasket
Patent: 5,316,318 →
Application: 08/049,327 →
Gas Turbine Engine Inspection System
Patent: 5,383,355 →
Application: 08/056,889 →
Sealing Structure for a Pivoting Blade of a Gas Turbine
Patent: 5,324,165 →
Application: 08/058,760 →
Sealing Device Between Blade Stages and a Rotary Drum, Particularly for Preventing Leaks Around the Stages of Straightener Blades
Patent: 5,328,328 →
Application: 08/064,431 →
Process for Forming a Coating on a Superalloy Component, and the Coated Component Produced Thereby
Patent: 5,366,136 →
Application: 08/065,763 →
Heat Treatment Process for a Ni-Based Superalloy
Patent: 5,417,782 →
Application: 08/070,862 →
Combined Jet Engine Provided with Means for Switching Between Two Operating States
Patent: 5,343,695 →
Application: 08/075,879 →
Combined Jet Engine with Ram Jet and Turbojet
Patent: 5,347,807 →
Application: 08/075,882 →
Installation for the Production by Draping of Multilayer Structures Formed from Composite Materials
Patent: 5,427,518 →
Application: 08/079,943 →
Sealing and Retaining Device for a Rotor Notched with Pin Settings Receiving Blade Roots
Patent: 5,320,492 →
Application: 08/087,903 →
Annular Gasket Disposed at One Axial Extremity of a Rotor and Covering Blade Feet
Patent: 5,330,324 →
Application: 08/106,632 →
Hollow Blade for a Turbomachine and Method of Manufacturing Said Blade
Patent: 5,343,619 →
Application: 08/111,892 →
Variable Phase Vane
Patent: 5,407,322 →
Application: 08/125,753 →
Turbomachine Equipped with Means for Adjusting the Play Between the Rectifiers and the Rotor of a Compressor
Patent: 5,362,202 →
Application: 08/130,177 →
Support Device for a Probe for the Detection and Location of Possible Faults Within a Bore
Patent: 5,424,639 →
Application: 08/134,906 →
Turbojet Engine Rotor
Patent: 5,395,213 →
Application: 08/135,568 →
Vane Extremity Locking System
Patent: 5,399,069 →
Application: 08/139,826 →
Method for Weld-Assembling a Disk Fitted with Small Wings by an Energy Beam
Patent: 5,383,593 →
Application: 08/145,182 →
Aircraft Engine Layout
Patent: 5,410,870 →
Application: 08/158,266 →
Fluid Supply System with Leak Detection Device
Patent: 5,419,360 →
Application: 08/161,259 →
System for Sealing the Bearing of a Machine, Especially a Turbomachine
Patent: 5,451,066 →
Application: 08/164,987 →
Rotationally Guided Control Ring for Pivotable Vanes in a Turbomachine
Patent: 5,387,080 →
Application: 08/171,699 →
Laser Beam Machining Process and Apparatus
Patent: 5,516,998 →
Application: 08/174,402 →
Method for Removing a Portion of a Coating by Liquid Jets
Patent: 5,413,270 →
Application: 08/174,403 →
Turbomachine Rotor with Blades Secured by Pins
Patent: 5,409,353 →
Application: 08/181,086 →
Retaining and Sealing System for Rotor Blades
Patent: 5,445,499 →
Application: 08/181,104 →
Stage of Vanes Free at One Extremity
Patent: 5,429,479 →
Application: 08/201,013 →
Hollow Blade for a Turbomachine
Patent: 5,407,326 →
Application: 08/227,373 →
Laser Welding Process for an Assembly of Two Metal Parts
Patent: 5,483,034 →
Application: 08/248,180 →
Depressurization Device for the Bearing Lubricating Chambers of a Turbomachine
Patent: 5,429,208 →
Application: 08/248,647 →
Inter-Blade Platform for a Bladed Disc of a Turbomachine Rotor
Patent: 5,421,704 →
Application: 08/258,175 →
Coated Superalloy Component
Patent: 5,476,723 →
Application: 08/266,670 →
Variable Camber Turbomachine Blade Having Resilient Articulation
Patent: 5,472,314 →
Application: 08/271,634 →
Turbo-Engine Provided with a Device for Blowing Air Onto a Rotor Element
Patent: 5,440,874 →
Application: 08/274,709 →
Tool for Measuring a Clamping Force Exerted by a Movable Spindle of a Length Measuring Instrument
Patent: 5,433,015 →
Application: 08/275,527 →
System for Ventilating the Turbine Disks and Stator of a Turbo Jet Engine
Patent: 5,468,123 →
Application: 08/280,541 →
Turbine Engine Stator with Pivoting Blades and Control Ring
Patent: 5,466,122 →
Application: 08/281,036 →
Circuit for Detecting the Position of Several Bipolar Contactors and Application for a Thrust Reverser of a Turbojet Engine
Patent: 5,508,626 →
Application: 08/289,252 →
Method for Hardening Metallic Elements
Patent: 5,549,809 →
Application: 08/289,253 →
Deicing System for a Butterfly Valve
Patent: 5,499,651 →
Application: 08/291,550 →
Device for Clamping a Part and Application to the Matching of a Tur- Bine Engine Blade by Electochemistry
Patent: 5,527,435 →
Application: 08/305,337 →
Turbo-Jet Equipped with Inclined Balancing Disks Within the Rotor of the High Pressure Compressor and Process for Producing Such Disks
Patent: 5,579,644 →
Application: 08/314,285 →
Process and Apparatus for Automatically Characterizing, Optimizing and Checking a Crack Detection Analysis Method
Patent: 5,570,431 →
Application: 08/326,386 →
Turbine Engine Equipped with Means for Controlling the Play Between the Rotor and Stator
Patent: 5,616,003 →
Application: 08/330,072 →
Turbo Aero Engine Provided with a Device for Heating Turbine Disks on Revving Up
Patent: 5,586,860 →
Application: 08/332,101 →
Compressor Turbojet Engine Whose Rotor Has a Movable Upstream Stage
Patent: 5,473,883 →
Application: 08/332,784 →
Device for Effecting Dynamic Measurement of the Distance Between the Facing Faces of the Rotor and the Stator of a Rotary Machine
Patent: 5,497,101 →
Application: 08/343,870 →
Method of Producing a Circular Fibre-Reinforced Metal Article, and Apparatus for Use in Said Method
Patent: 5,562,245 →
Application: 08/351,703 →
Method of Manufacturing Axisymmetric Components Made of a Composite Material Having a Metallic Matrix
Patent: 5,460,774 →
Application: 08/356,127 →
Device for Shot-Blasting Surfaces Inaccessible by a Straight Pipe
Patent: 5,499,519 →
Application: 08/360,290 →
Turbomachine Vane with Variable Camber
Patent: 5,520,511 →
Application: 08/361,586 →
Fixing Arrangement for a Thermal Protection Tile in a Combustion Chamber
Patent: 5,501,071 →
Application: 08/361,587 →
Method of Making a Shell Mould from a Ceramic Material for a Disposable Pattern Casting Process
Patent: 5,503,218 →
Application: 08/371,867 →
Cooled Turbine Blade
Patent: 5,496,151 →
Application: 08/379,293 →
Turbine Engine Rotor Having Axial or Inclined, Issuing Blade Grooves
Patent: 5,540,552 →
Application: 08/382,762 →
Method of Producing a Fibre-Reinforced Metallic Circular Part
Patent: 5,544,805 →
Application: 08/386,775 →
Process for Welding Two Blade Parts
Patent: 5,551,623 →
Application: 08/390,317 →
System for Balancing and Damping a Turbojet Engine Disk
Patent: 5,582,077 →
Application: 08/393,358 →
Method of Making a Casting Mould Having a Cellular Structure
Patent: 6,120,713 →
Application: 08/403,946 →
Automatic Welding Installation
Patent: 5,512,726 →
Application: 08/409,683 →
Protection Arrangement for an Electronic Device Sensitive to Electro- Magnetic Radiation
Patent: 5,566,040 →
Application: 08/441,732 →
Device for Controlling the Opening and Closing of Discharge Valves of a Turbojet Engine
Patent: 5,515,673 →
Application: 08/446,334 →
Braking Nuts or Screws and Mountings Obtained with Same Devices
Patent: 5,702,217 →
Application: 08/490,611 →
Redundant Mass Flow Meter
Patent: 5,583,302 →
Application: 08/494,226 →
Metallic Lip Seal and Turbo Jet Engine Equipped with Said Seal
Patent: 5,577,887 →
Application: 08/494,694 →
Non-Destructive Process for Characterizing the Surface Condition of a Part
Patent: 5,610,326 →
Application: 08/495,395 →
Method of Manufacturing Sheets Made of Alloy 718 for the Superplastic Forming of Parts Therefrom
Patent: 6,328,827 →
Application: 08/498,482 →
Turbocompressor Disk Provided with an Asymmetrical Circular Groove
Patent: 5,584,658 →
Application: 08/505,386 →
Device for Assembling a Circular Stage of Pivoting Vanes
Patent: 5,636,968 →
Application: 08/508,169 →
Turbojet Equipped with a Deicing System on the Intake Case
Patent: 5,623,821 →
Application: 08/509,054 →
Method for Producing a Monobloc Rotor with Hollow Blades and Monobloc Rotor with Hollow Blades Obtained by Said Method
Patent: 5,511,949 →
Application: 08/517,194 →
Composite Material Turbine Engine Blade Equipped with a Seal and Its Production Process
Patent: 5,628,622 →
Application: 08/518,175 →
Process for Obtaining a Bladed Circular Metallic Article
Patent: 5,678,164 →
Application: 08/518,972 →
Process for Producing Polycarbonate
Patent: 5,548,041 →
Application: 08/521,071 →
Process for Manufacturing a Hollow Blade for a Turbo-Machine
Patent: 5,636,440 →
Application: 08/521,583 →
Process and Apparatus for Automatically Characterizing, Optimizing and Checking a Crack Detection Analysis Method
Patent: 5,563,417 →
Application: 08/523,959 →
Fixing Arrangement for a Thermal Protection Tile in a Combustion Chamber
Patent: 5,560,197 →
Application: 08/533,277 →
Device for Actively Controlling Combustion Instabilities and for Decoking a Fuel Injector
Patent: 5,797,266 →
Application: 08/552,015 →
Unsectored, One Piece Distributor of a Turbojet Turbine Stator
Patent: 5,645,398 →
Application: 08/562,597 →
Sectored, One-Piece Nozzle of a Turbine Engine Turbine Stator
Patent: 5,752,804 →
Application: 08/562,598 →
Axial Fixing Arrangement for Rotor Blades of a Turbomachine
Patent: 5,622,476 →
Application: 08/572,045 →
Procedure for Measuring the Dimensions of the Optical Focus of an X-Ray Tube
Patent: 5,606,591 →
Application: 08/573,259 →
Differential Pressure Detector with Reduced Reaction Forces
Patent: 5,797,418 →
Application: 08/578,911 →
Method of Producing a Circular Fibre-Reinforced Metal Article, and Apparatus for Use in Said Method
Patent: 5,642,851 →
Application: 08/618,715 →
Layout for Connecting Two Angular Sectors of a Turbomachine, and Seal Designed for Use in This Layout
Patent: 5,707,207 →
Application: 08/618,720 →
Method of Preventing Instabilities Produced by Combustion in a Turbojet Engine
Patent: 5,699,663 →
Application: 08/622,279 →
Turbomachine Blade Made of Composite Material
Patent: 5,672,417 →
Application: 08/623,013 →
Combustion Chamber Having a Multi-Hole Cooling System with Variably Oriented Holes
Patent: 5,775,108 →
Application: 08/633,314 →
Fluid Distribution Valve
Patent: 5,785,079 →
Application: 08/641,031 →
Device and Process for the Simultaneous Measurement of the Extent and the Temperature of a Crack at the Surface of an Electrically Conductive Solid Body
Patent: 5,758,970 →
Application: 08/647,886 →
Method of Making Ceramic Cores for Use in Casting
Patent: 5,697,418 →
Application: 08/672,297 →
Disengageable Manual Drive for Rotating a Turbomachine Rotor
Patent: 5,813,829 →
Application: 08/672,915 →
Nickel-Based Superalloys with High Temperature Stability
Patent: 5,815,792 →
Application: 08/689,157 →
Arrangement of Gas Turbine Engine Comprising Aerodynamic Vanes and Struts Located in the Same Plane and an Intermediate Casing
Patent: 5,740,674 →
Application: 08/698,064 →
Suspension Device for a Turboprop Engine
Patent: 5,806,792 →
Application: 08/698,070 →
Digital Frequency Demodulator
Patent: 5,818,881 →
Application: 08/702,049 →
Process for Machining Titanium Parts Using Separate Biased Spraying Collar
Patent: 5,718,156 →
Application: 08/705,689 →
Damper Disposition Mounted Between Rotor Vanes
Patent: 5,700,133 →
Application: 08/714,978 →
Control Device for a Stage of Blades with Variable Pitch
Patent: 5,692,879 →
Application: 08/717,193 →
Method of Making a Disk Consisting of a Spirally Wound Fibre
Patent: 5,733,495 →
Application: 08/719,655 →
Method of Manufacturing a Hollow Turbomachine Blade
Patent: 5,826,332 →
Application: 08/721,352 →
Process for Joining, Coating or Repairing Parts Made of Intermetallic Material
Patent: 5,788,142 →
Application: 08/724,782 →
Bearing Assembly with Dynamic Drainage Supplied with Lubricant
Patent: 5,749,660 →
Application: 08/727,041 →
Differential Load Amplifier for Piezoelectric Sensors
Patent: 5,859,561 →
Application: 08/729,276 →
Process for Automatic Detection of the Assessable Areas in Images of Mechanical Components
Patent: 5,892,841 →
Application: 08/731,487 →
Process for Moulding High Strength Elongated Parts Made of a Fibre-Resin Composite
Patent: 5,885,504 →
Application: 08/736,719 →
Sealing Unit with Axial Brushes Controlled by Static Pressure in Axial Movement
Patent: 5,700,011 →
Application: 08/738,908 →
Process for Making a Composite Rotor with Metallic Matrix
Patent: 5,745,994 →
Application: 08/747,765 →
Device for Separating and Filtering Particles in a Flow of Fluid
Patent: 5,653,880 →
Application: 08/757,952 →
Pivoting Vane Internal Extremity Bearing
Patent: 5,796,199 →
Application: 08/759,927 →
Device for Joining Circular Distributor Segments to a Turbine Engine Casing
Patent: 5,775,874 →
Application: 08/760,872 →
Oil Separator Rotor for Lubrication Enclosure
Patent: 5,776,229 →
Application: 08/764,450 →
Cooling Device for a Turboshaft Engine on an Aircraft
Patent: 5,806,793 →
Application: 08/766,472 →
Cooled Turbine Guide Vane
Patent: 5,772,398 →
Application: 08/774,636 →
Method and Apparatus for the Serial Production of Parts by Electrochemical Machining
Patent: 5,900,134 →
Application: 08/775,747 →
Turbine Disk Cooling Device
Patent: 5,800,125 →
Application: 08/779,438 →
Drill Bit Having a Hemispherical Head with an Evolutive Cut
Patent: 5,725,338 →
Application: 08/780,233 →
Movable Fan Vane with a Safety Profile
Patent: 5,853,286 →
Application: 08/781,838 →
Labyrinth Disk with Built-in Stiffener for Turbomachine Rotor
Patent: 5,816,776 →
Application: 08/791,051 →
Hybrid Component with High Strength/Mass Ratio and Method of Manufacturing Said Component
Patent: 5,887,332 →
Application: 08/804,074 →
Thermal Barrier Coating with Improved Sub-Layer and Parts Coated with Said Thermal Barrier
Patent: 5,843,585 →
Application: 08/807,755 →
Control Device for a Pivot Integrated in a Manifold
Patent: 5,795,128 →
Application: 08/814,340 →
Method of Producing a Coating Layer on a Localized Area of a Superalloy Component
Patent: 5,890,274 →
Application: 08/816,738 →
Restraining Device for the Root of a Fan Blade
Patent: 5,820,347 →
Application: 08/818,941 →
Fuel Injection Supply Circuit for Providing a Metered Decontaminated Flow of Fuel to the Fuel Injectors
Patent: 5,832,717 →
Application: 08/819,370 →
Bypass Engine with Means for Limiting Gas Leakage
Patent: 5,822,975 →
Application: 08/834,877 →
Tools for Mounting a Turbo Aero Engine Distributor
Patent: 5,918,356 →
Application: 08/840,852 →
Process for Manufacturing a Hollow Turbomachine Blade and a Multiple-Action Furnace Press for Use in Said Process
Patent: 5,933,951 →
Application: 08/871,637 →
Laser-Assisted Milling Process
Patent: 5,906,459 →
Application: 08/873,082 →
Method for Enabling Operation of an Aircraft Turbo-Engine with Rotor Unbalance
Patent: 5,974,782 →
Application: 08/873,452 →
Gas Containment Box Used with a Welding Head
Patent: 5,950,904 →
Application: 08/877,557 →
Device for Blowing Gases for Regulating Clearances in a Gas Turbine Engine
Patent: 5,980,201 →
Application: 08/877,903 →
Deburring Tool and Process on a Hole Opposite the Tool
Patent: 5,897,273 →
Application: 08/891,028 →
Layout and Process for Adjusting the Diameter of a Stator Ring
Patent: 5,915,919 →
Application: 08/893,521 →
Composite Material Containing a Fibre Reinforced Vitroceramic Matrix and Method of Making Same
Patent: 6,034,012 →
Application: 08/895,885 →
Process for the Manufacture of a Hollow Turbomachine Blade and Apparatus for Use in Said Process
Patent: 5,946,802 →
Application: 08/909,874 →
Truing Wheel with Incorporated Cooling
Patent: 5,846,125 →
Application: 08/911,043 →
Process for Manufacturing a Hollow Turbomachine Blade and Progressive Hot Twisting Apparatus for Use in Said Process
Patent: 5,933,952 →
Application: 08/914,186 →
Process for the Automatic Detection of Defects in Mechanical Parts Having Complex Geometry
Patent: 6,058,204 →
Application: 08/914,214 →
Method of Manufacturing a Hollow Blade for a Turbomachine
Patent: 5,896,658 →
Application: 08/951,292 →
Fibre-Reinforced Rotor Stage for a Turbomachine
Patent: 5,941,688 →
Application: 08/964,632 →
Inert Gas Electric Arc Welding Process and Torch for Use Therein
Patent: 5,965,037 →
Application: 08/968,451 →
Redundant Front Suspension System for a Turboshaft Engine
Patent: 5,871,175 →
Application: 08/974,423 →
Redundant Front Suspension System for a Turboshaft Engine
Patent: 5,871,176 →
Application: 08/974,559 →
Redundant Front Suspension System for a Turboshaft Engine
Patent: 5,871,177 →
Application: 08/974,678 →
Process for Producing a Coating for Providing Superalloys with Highly Efficient Protection Against High-Temperature Corrosion, a Protective Coating Formed by the Process, and Articles Protected by the Coating
Patent: 6,183,888 →
Application: 08/989,059 →
Non-Destructive Process for Estimating the Ageing of an Article Made of a Composite Material
Patent: 5,922,957 →
Application: 09/000,976 →
Bladed Disk with Three-Root Blades
Patent: 5,919,032 →
Application: 09/003,635 →
Control of Cooling Flows for High-Temperature Combustion Chambers
Patent: 6,105,371 →
Application: 09/006,955 →
Seal of Stacked Thin Slabs That Slide Within Reception Slots
Patent: 5,997,247 →
Application: 09/006,956 →
Linked Multilayer Fabric for Structural Composite Materials
Patent: 5,899,241 →
Application: 09/018,176 →
Method of Bladder Moulding Thin Articles Made of a Composite Material Using a Conforming Device
Patent: 6,083,448 →
Application: 09/027,222 →
Process for Producing Precision Hollow Articles Made of Composite Material
Patent: 6,290,889 →
Application: 09/035,299 →
A Constant-Speed Twin Spool Turboprop Unit
Patent: 6,082,967 →
Application: 09/047,403 →
Drive System for a Propeller Driven Transport Aircraft
Patent: 6,279,852 →
Application: 09/061,092 →
System for the Admission of Air into a Working Section of a Gas Turbine Engine
Patent: 6,082,669 →
Application: 09/071,157 →
Protective Coating for Metal Components Providing Good Corrosion Resistance in a Saline Atmosphere, and Method of Producing Said Coating
Patent: 5,989,735 →
Application: 09/080,238 →
Afterburner Flame Holder with Rotationally-Splitting Radial Arms
Patent: 6,098,401 →
Application: 09/081,281 →
Rear Mixer Ejector for a Turbomachine
Patent: 6,178,742 →
Application: 09/103,545 →
Apparatus for Heating or Cooling a Circular Housing
Patent: 6,035,929 →
Application: 09/115,523 →
Apparatus for Ventilating a Turbine Stator Ring
Patent: 5,964,575 →
Application: 09/115,695 →
Device for Cooling or Heating a Circular Housing
Patent: 6,149,074 →
Application: 09/147,829 →
Process for the Assembly or Refacing of Titanium Aluminide Articles by Diffusion Brazing
Patent: 6,223,976 →
Application: 09/154,513 →
Method of Improving Oxidation and Corrosion Resistance of a Superalloy Article, and a Superalloy Article Obtained by the Method
Patent: 6,228,513 →
Application: 09/158,094 →
Turbomachine Combustion Chamber
Patent: 6,070,412 →
Application: 09/179,896 →
System for Inspecting Internal Zones of a Machine by Optical Fibre Endoscopy
Patent: 6,011,617 →
Application: 09/199,492 →
Process for Manufacturing a Hollow Turbomachine Blade and a Multiple-Action Furnace Press for Use in Said Process
Patent: 6,210,630 →
Application: 09/204,155 →
Self-Washing Device for Separating and Filtering Solid Particles from a Flow of Liquid , and Use of the Device in a Fuel Injection Circuit
Patent: 6,125,826 →
Application: 09/212,864 →
Titanium-Based Intermetallic Alloys
Patent: 6,132,526 →
Application: 09/213,247 →
Hybrid Component with High Strength/Mass Ratio and Method of Manufacturing Said Component
Patent: 6,132,857 →
Application: 09/215,292 →
Turbomachine with Mutual Braking of C0NCENTRIC Shafts
Patent: 6,135,712 →
Application: 09/227,879 →
Apparatus for Controlling the Radial Play of a Roller Bearing
Patent: 6,261,003 →
Application: 09/244,639 →
Circular Stage of Vanes Connected at Internal Ends Thereof by a Connecting Ring
Patent: 6,129,512 →
Application: 09/252,821 →
Leaktight Seal of a Circular Vane Stage
Patent: 6,332,617 →
Application: 09/255,023 →
Soundproofing Panel and Method of Producing Said Panel
Patent: 6,085,865 →
Application: 09/257,191 →
Method and Device for Reversing the Thrust of Very High Bypass Ratio Turbojet Engines
Patent: 6,148,605 →
Application: 09/262,345 →
Method of Reducing the Gap Between a Liner and a Turbine Distributor of a Turbojet Engine
Patent: 6,163,959 →
Application: 09/272,774 →
Assembly of Two Objects Articulated to Each Other with Two Degrees of Freedom in Rotation
Patent: 6,092,934 →
Application: 09/288,290 →
Progressive Hot Twisting Apparatus for Use in a Process for Manufacturing a Hollow Turbomachine Blade
Patent: 6,242,715 →
Application: 09/290,996 →
Ceramic Heat Barrier Coating Having Low Thermal Conductivity, and Process for the Deposition of Said Coating
Patent: 6,251,504 →
Application: 09/325,042 →
High-Pressure Turbine Stator Ring for a Turbine Engine
Patent: 6,200,091 →
Application: 09/330,063 →
Particle Traps for Turbo-Prop Engine
Patent: 6,129,509 →
Application: 09/342,730 →
Method and Device for Machining Holes or Shapes of Varying Profile Using an Excimer Laser
Patent: 6,329,632 →
Application: 09/359,811 →
Sealing Arrangement with Automatic Clearance Adjustment
Patent: 6,338,490 →
Application: 09/363,838 →
Method for Metal Coating of Fibres by Liquid Process
Patent: 6,174,570 →
Application: 09/381,296 →
Low Thermal Conductivity Heat Barrier Coating, a Metal Article Having Such a Coating, and a Process for Depositing the Coating
Patent: 6,312,832 →
Application: 09/391,342 →
Cooled Turbine Blade
Patent: 6,328,531 →
Application: 09/412,759 →
Process and Instrument for Checking the Bonding of the Cellular Core of a Honeycomb to a Skin
Patent: 6,452,670 →
Application: 09/429,306 →
Leaf Seal
Patent: 6,464,232 →
Application: 09/436,769 →
Process for the Manufacture of Thin Ceramic Cores for Use in Precision Casting
Patent: 6,286,582 →
Application: 09/436,770 →
Dual-Contact Brush Seal
Patent: 6,328,311 →
Application: 09/453,511 →
Cooling System for a Turbomachine Speed Reducer
Patent: 6,282,881 →
Application: 09/476,083 →
Fuel circuit with protected main filter
Patent: 6,251,270 →
Application: 09/481,382 →
Retaining Arrangement for a Bearing, in Particular for a High Pressure Compressor Shaft
Patent: 6,338,578 →
Application: 09/554,516 →
Method for Obtaining Thin, Light and Rigid Metal Parts
Patent: 6,379,480 →
Application: 09/581,183 →
Direct Control Fuel Valve for Fuel Flow Injecting Circuit
Patent: 6,367,768 →
Application: 09/582,226 →
Radiographic Control of an Object Having a Crystal Lattice
Patent: 6,295,335 →
Application: 09/600,872 →
Method of improving oxidation and corrosion resistance of a superalloy article, and a superalloy article obtained by the method
Patent: 6,332,937 →
Application: 09/729,972 →
Publication: US 2002/0006524
Ceramic Heat Barrier Coating Having Low Thermal Conductivity, and Process for the Deposition of Said Coating
Patent: 6,432,478 →
Application: 09/758,195 →
Publication: US 2001/0008708
Related Assignments (2)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignor's Interest Feb 12, 2008
From: SNECMA MOTEURS
To: HISPANO-SUIZA
Reel/Frame 020487/0852 →
Change of Name Feb 20, 2008
From: SNECMA MOTEURS
To: SNECMA
Reel/Frame 020609/0569 →