IP Library › Assignment 016079/0257
Patent Assignment
Reel/Frame 016079/0257

Assignment of Assignor's Interest

Recorded: 2005-06-01 Pages: 24
Assignor
Assignee
BRP US INC.
10101 SCIENCE DRIVE, STURTEVANT, WISCONSIN, 53177
Covered Properties (154)
Abrasion Resistant Roller Apparatus for Internal Combustion Engines
Patent: 4,800,856 →
Application: 06/710,057 →
Two-Cycle Internal Combustion Engine Including Means for Varying Cylinder Port Timing
Patent: 4,660,514 →
Application: 06/715,479 →
Marine Propulsion Device Bellows Assembly
Patent: 4,938,726 →
Application: 06/722,004 →
Marine Propulsion Device Fuel Distribution System
Patent: 4,722,708 →
Application: 06/727,814 →
Internal Combustion Engine
Patent: 4,757,792 →
Application: 06/742,583 →
Marine Propulsion Device with Swing Angle Indication Mechanism
Patent: 4,722,705 →
Application: 06/744,482 →
Automatic Trim System
Patent: 4,718,872 →
Application: 06/773,591 →
Baffled Air Intake System for Outboard Motors
Patent: 4,978,321 →
Application: 06/797,745 →
Marine Propulsion Device Bellows Assembly
Patent: 4,753,619 →
Application: 06/901,967 →
Marine Propulsion Device Water Supply System
Patent: 4,699,598 →
Application: 06/902,132 →
Outboard Motor Cowl Assembly
Patent: 4,708,673 →
Application: 07/004,756 →
Power Steering System for Marine Propulsion Device
Patent: 4,744,777 →
Application: 07/028,958 →
Wrist Pin Lubrication System for Two-Cycle Engines
Patent: 4,831,979 →
Application: 07/043,108 →
Counter-Rotation Transmission
Patent: 4,850,910 →
Application: 07/055,733 →
Marine Propulsion Device Low-Speed Exhaust System
Patent: 4,795,383 →
Application: 07/058,365 →
Water Jacketed Exhaust Relief System for Marine Propulsion Devices
Patent: 4,799,905 →
Application: 07/062,435 →
Reverse Thrust Propeller
Patent: 4,778,419 →
Application: 07/063,208 →
Marine Propulsion Device Ball Clutch Transmission
Patent: 4,789,366 →
Application: 07/065,941 →
Dual Fuel Injection System for Two Stroke Internal Combustion Engine
Patent: 4,779,581 →
Application: 07/112,472 →
Shift Linkage for Marine Propulsion Device
Patent: 4,838,822 →
Application: 07/129,457 →
Engine with Exhaust Gas Sensing
Patent: 4,831,820 →
Application: 07/131,449 →
Electronically Assisted Engine Starting Means
Patent: 4,858,585 →
Application: 07/131,457 →
Linkage for Activating Throttle and Spark Advance
Patent: 4,829,961 →
Application: 07/136,737 →
Marine Propulsion Device Exhaust System
Patent: 4,861,296 →
Application: 07/137,509 →
Marine Propulsion Device with Two Piece Propeller Shaft Assembly Including Spring Clip for Releasably Preventing Relative Movement Between Propeller Shaft Pieces
Patent: 4,863,406 →
Application: 07/182,477 →
Internal Combustion Engine
Patent: 4,947,807 →
Application: 07/188,952 →
Multi-Cylinder Engine with Uniform Cylinder Sensitivity to Knocking
Patent: 4,870,929 →
Application: 07/215,575 →
Electrically Conductive Plastic Bushings for Marine Propulsion Devices
Patent: 4,932,795 →
Application: 07/270,767 →
Single Lever Control
Patent: 4,951,520 →
Application: 07/272,544 →
Lost Foam Engine Block Pattern
Patent: 5,018,568 →
Application: 07/306,245 →
Under the Flywheel Ignition System
Patent: 4,862,861 →
Application: 07/311,090 →
Internal Combustion Engine and Method for Making the Same
Patent: 5,031,685 →
Application: 07/315,900 →
Outboard Motor Vibration Isolation System
Patent: 4,979,918 →
Application: 07/316,285 →
Marine Propulsion Device
Patent: 4,966,567 →
Application: 07/316,417 →
Engine with Improved Exhaust Gas Sensing
Patent: 4,903,648 →
Application: 07/338,743 →
Marine Propulsion Device Anode Arrangement
Patent: 4,948,384 →
Application: 07/350,936 →
Marine Propulsion Device Gear Arrangement
Patent: 5,035,664 →
Application: 07/351,172 →
Marine Propulsion Device Retention Mechanism
Patent: 5,035,663 →
Application: 07/351,703 →
Marine Propulsion Device Seal Arrangement
Patent: 4,971,585 →
Application: 07/351,857 →
Two Piece Drive Shaft Retention Device for Outboard Motor
Patent: 5,112,259 →
Application: 07/373,283 →
Method and Apparatus for Determining Necessary Shim Thickness for a Marine Propulsion Device Pinion and Bearing Carrier Assembly
Patent: 4,993,165 →
Application: 07/387,196 →
Marine Propulsion Device Tilt and Trim Mechanism
Patent: 4,925,411 →
Application: 07/403,985 →
Voltage Regulator and Rectifier Having Over-Temperature Protection
Patent: 5,078,627 →
Application: 07/451,885 →
In-Trimming Hydraulic Circuit
Patent: 5,030,147 →
Application: 07/475,982 →
Marine Propulsion Device with Arrangement for Flushing Engine Cooling Jacket
Patent: 5,049,101 →
Application: 07/479,936 →
Marine Propulsion Device Internal Combustion Engine
Patent: 5,078,101 →
Application: 07/479,945 →
Internal Combustion Engine with Recessed Intake Manifold
Patent: 5,005,535 →
Application: 07/482,932 →
Fuel Supply System Component Assembly
Patent: 5,024,188 →
Application: 07/487,669 →
Pressure and Temperature Relief Valve and Diaphragm Valve
Patent: 5,048,751 →
Application: 07/509,877 →
Debris Resistant Valve Assembly
Patent: 5,038,724 →
Application: 07/509,978 →
Internal Combustion Engine
Patent: 5,035,211 →
Application: 07/512,797 →
Internal Combustion Engine
Patent: 5,022,355 →
Application: 07/512,951 →
Cover for Transom Bracket Mounting Screws
Patent: 5,044,599 →
Application: 07/515,824 →
Method for Manufacturing Foam Pattern Assemblies
Patent: 5,086,825 →
Application: 07/521,590 →
Engine Maintenance Fluid Introduction System
Patent: 4,998,969 →
Application: 07/523,328 →
Marine Propulsion Device with Trailing Mechanism Including Positive Mechanical Latch
Patent: 5,102,358 →
Application: 07/523,329 →
Integral Lifting Hook for an Outboard Engine
Patent: 5,007,393 →
Application: 07/525,251 →
Molded Lower Motor Cover
Patent: 5,069,643 →
Application: 07/525,595 →
Internal Combustion Engine
Patent: 5,062,403 →
Application: 07/525,746 →
Marine Propulsion Device with Directable Telltale Discharge
Patent: 5,080,617 →
Application: 07/525,862 →
Marine Propulsion Device Tilt Limit Switch
Patent: 5,037,338 →
Application: 07/525,914 →
Marine Propulsion Device Tilt Tube
Patent: 5,154,651 →
Application: 07/526,044 →
Internal Combustion Engine
Patent: 4,993,369 →
Application: 07/526,065 →
Marine Propulsion Device Cowl Assembly
Patent: 5,052,353 →
Application: 07/526,499 →
System to Prevent Reverse Engine Operation
Patent: 5,040,519 →
Application: 07/527,556 →
Exhaust Gas Discharge System for Two-Stroke Internal Combustion Engine
Patent: 5,101,626 →
Application: 07/554,542 →
Apparatus for Lost Foam Molding and Method of Assembling Same
Patent: 5,011,398 →
Application: 07/561,290 →
Marine Propulsion Device with Closed Deck Cylinder Block Construction
Patent: 5,048,468 →
Application: 07/583,008 →
Exhaust Relief System with Baffle
Patent: 5,106,330 →
Application: 07/589,430 →
Apparatus for Positioning a Sensor
Patent: 5,131,366 →
Application: 07/602,919 →
Test Apparatus for Optp-Electronic Time Based Generator of an Ignition System
Patent: 5,184,080 →
Application: 07/608,541 →
Marine Propulsion Internal Combustion Engine
Patent: 5,088,344 →
Application: 07/623,272 →
Vapor Separator
Patent: 5,137,002 →
Application: 07/631,207 →
Lost Foam Pattern Assembly for V-Block Engine
Patent: 5,054,537 →
Application: 07/636,561 →
Oiling System for Internal Combustion Engine
Patent: 5,193,500 →
Application: 07/654,088 →
Marine Propulsion Device Exhaust System
Patent: 5,112,260 →
Application: 07/657,241 →
Apparatus and Method for Flushing a Casting
Patent: 5,195,276 →
Application: 07/657,658 →
Marine Propulsion Device
Patent: 5,176,093 →
Application: 07/701,618 →
Marine Propulsion Device Hydraulic Assembly Including a Blow Molded Reservoir
Patent: 5,137,480 →
Application: 07/709,599 →
Shiftable Reversing Transmission for Marine Propulsion Device
Patent: 5,151,059 →
Application: 07/710,163 →
Trim Switch for Tiller-Steered Outboard
Patent: 5,180,320 →
Application: 07/716,912 →
Marine Propulsion Device with Trailing Mechanism Including Positive Mechanical Latch
Patent: 5,178,568 →
Application: 07/723,811 →
Marine Propulsion Device
Patent: 5,209,684 →
Application: 07/726,157 →
Marine Steering Apparatus
Patent: 5,176,549 →
Application: 07/736,476 →
Single Lever Control
Patent: 5,188,206 →
Application: 07/737,388 →
Automatic Trim System
Patent: 5,167,546 →
Application: 07/744,952 →
Marine Propulsion Device Having Quick-Disconnect Connector
Patent: 5,201,680 →
Application: 07/762,859 →
Marine Propulsion Device Internal Combustion Engine and Method for Making the Same
Patent: 5,203,167 →
Application: 07/782,427 →
Outboard Motor Vibration Isolation System Including Improved Rubber Mount
Patent: 5,192,235 →
Application: 07/782,545 →
Shift Interlock System
Patent: 5,256,091 →
Application: 07/788,507 →
Marine Apparatus
Patent: 5,409,409 →
Application: 07/799,735 →
Outboard Motor with Improved Housing Interface
Patent: 5,234,362 →
Application: 07/823,258 →
Marine Propulsion Device Water Inlet Screen
Patent: 5,215,487 →
Application: 07/823,293 →
Exhaust Manifold Expansion Slot for Internal Combustion Motor
Patent: 5,174,252 →
Application: 07/829,411 →
Fuel Feed System
Patent: 5,203,306 →
Application: 07/830,769 →
Cast Inter-Cylinder Cooling Passage for Internal Combustion Motors
Patent: 5,193,499 →
Application: 07/831,525 →
Marine Engine Housing Cooling Apparatus
Patent: 5,178,567 →
Application: 07/834,609 →
Thermostat Cover with Snap-in Nipple
Patent: 5,170,752 →
Application: 07/841,048 →
Arrangement for Supplying Combustion Air to an Outboard Motor
Patent: 5,176,551 →
Application: 07/847,437 →
Vibration Absorbing Steering Device for Outboard Motor
Patent: 5,194,025 →
Application: 07/847,928 →
Exhaust Discharge for a Pump Jet
Patent: 5,273,467 →
Application: 07/852,535 →
Vacuum Valve for Die Casting
Patent: 5,203,396 →
Application: 07/874,629 →
Vacuum Die Casting Process
Patent: 5,219,409 →
Application: 07/874,648 →
Sealed Shot Sleeve for Vacuum Die Casting
Patent: 5,199,480 →
Application: 07/874,740 →
Internal Combustion Engine Oil Pump
Patent: 5,275,539 →
Application: 07/896,143 →
Shift Rod Quick Connect and Disconnect
Patent: 5,211,591 →
Application: 07/898,481 →
Axial Fan Flywheel
Patent: 5,199,388 →
Application: 07/908,151 →
Air Compressor Having a High Pressure Output
Patent: 5,332,368 →
Application: 07/918,582 →
Lower Unit Torpedo Configuration
Patent: 5,277,634 →
Application: 07/945,821 →
Throttle Lever Position Sensor for Two-Stroke Fuel Injected Engine
Patent: 5,273,016 →
Application: 07/954,492 →
Sealable and Reusable Pouch
Patent: 5,372,429 →
Application: 07/959,865 →
Marine Propulsion Device with Closed Deck
Patent: 5,228,194 →
Application: 07/987,806 →
Trim Assembly
Patent: 5,372,529 →
Application: 08/046,492 →
Latch Mechanism for Outboard Motor Cowl Assembly
Patent: 5,338,236 →
Application: 08/055,982 →
Hidden Lower Motor Cover Attachment Means
Patent: 5,360,358 →
Application: 08/065,993 →
Flushing System for Outboard Motor
Patent: 5,350,329 →
Application: 08/077,562 →
Tiller Arm and Steering Bracket Assembly
Patent: 5,378,178 →
Application: 08/078,137 →
Marine Propulsion Device with Selectively Operable Secondary Exhaust Discharge
Patent: 5,348,500 →
Application: 08/083,998 →
Apparatus for Assembling Lost Foam Casting Patterns
Patent: 5,407,523 →
Application: 08/106,055 →
Fuel Injection Device for Internal Combustion Engines
Patent: 5,540,206 →
Application: 08/107,835 →
Air Silencer Mounting Arrangement
Patent: 5,410,110 →
Application: 08/118,155 →
Marine Propulsion Device with Releasably Coupled Drive Shaft Assembly
Patent: 5,411,423 →
Application: 08/118,413 →
Outboard Motor Cover Assembly
Patent: 5,407,372 →
Application: 08/126,549 →
Vibration Isolating Mounting for Outboard Motor
Patent: 5,443,406 →
Application: 08/126,784 →
Outboard Motor with Separated Exhaust Gas Pulsing and Exhaust Gas Discharge
Patent: 5,372,530 →
Application: 08/127,793 →
Marine Propulsion Device with Means for Supplying Secondary Air to Catalytic Converter
Patent: 5,425,232 →
Application: 08/128,475 →
Outboard Motor Exhaust System
Patent: 5,437,155 →
Application: 08/136,413 →
Jet Pump Exhaust System
Patent: 5,464,357 →
Application: 08/147,973 →
Marine Engine Alternator Construction
Patent: 5,530,305 →
Application: 08/181,578 →
Method and Apparatus for Producing Housing Having a Cast-in-Place Insert Using Lost Foam Process
Patent: 5,372,176 →
Application: 08/216,770 →
Outboard Motor with Four Stroke Engine
Patent: 5,443,044 →
Application: 08/235,502 →
Cylinder Head Pattern Assembly
Patent: 5,449,033 →
Application: 08/235,682 →
Four-Stroke Internal Combustion Engine with Contaminated Oil Elimination
Patent: 5,456,230 →
Application: 08/245,977 →
Method of Inserting, Boring, and Honing a Cylinder Bore Liner
Patent: 5,419,037 →
Application: 08/247,000 →
Four Stroke Engine with Combined Oil Pump and Filter Assembly
Patent: 5,558,058 →
Application: 08/253,362 →
Outboard Motor with Oil Sump Cooling Arrangement
Patent: 5,462,464 →
Application: 08/253,862 →
Outboard Motor Including Easy Withdrawal and Insertion of Camshaft and Rocker Arm Support Shaft
Patent: 5,421,298 →
Application: 08/253,926 →
Outboard Motor Power Head Assembly
Patent: 5,498,181 →
Application: 08/254,999 →
Outboard Motor Exhaust Housing and Lost Foam Pattern Therefor
Patent: 5,498,182 →
Application: 08/255,096 →
Fuel Injection Nozzle
Patent: 5,472,013 →
Application: 08/276,718 →
Fuel Injection Device According to the Solid-State Energy Storage Principle for Internal Combustion Engines
Patent: 5,520,154 →
Application: 08/295,807 →
Marine Propulsion Pump with Two Counter Rotating Impellers
Patent: 5,480,330 →
Application: 08/321,053 →
Vacuum System Testing Tool
Patent: 5,540,084 →
Application: 08/322,207 →
Engine Breather Construction
Patent: 5,474,035 →
Application: 08/375,268 →
Method of Molding Frp Parts
Patent: 5,714,104 →
Application: 08/489,363 →
Oil Supply Failure Detection Circuit
Patent: 5,662,081 →
Application: 08/506,587 →
Electronic Control Circuit for an Internal Combustion Engine
Patent: 5,687,050 →
Application: 08/506,880 →
Oil Lubricating System for a Two-Stroke Internal Combustion Engine
Patent: 5,632,241 →
Application: 08/507,051 →
Modified Heel Valve Construction
Patent: 5,639,062 →
Application: 08/507,058 →
Outboard Motor Exhaust Housing and Lost Foam Pattern Therefor
Patent: 5,595,235 →
Application: 08/552,396 →
Four-Cycle Marine Engine
Patent: 5,738,051 →
Application: 08/610,553 →
Electronic Ignition Interruption Apparatus
Patent: 5,700,168 →
Application: 08/697,061 →
Tractor Pump Jet
Patent: 5,846,103 →
Application: 08/728,120 →
Marine Jet Propulsion Water Inlet System
Patent: 5,846,105 →
Application: 08/901,922 →
Related Assignments (18)
Other recorded transfers of the patents in this record — the chain of ownership.
Grant of Security Interest (Patents) Aug 17, 2001
From: GENMAR IP LLC; JTC ACQUISITION LLC; GENMAR TRANSPORATION LLC; FOUR WINNS BOATS, L.L.C.
To: BANK OF NEW YORK, THE, AS COLLATERAL AGENT
Reel/Frame 012066/0674 →
Assignment of Assignor's Interest Aug 22, 2001
From: OUTBOARD MARINE CORPORATION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 012090/0355 →
Nunc Pro Tunc Assignment Dec 15, 2003
From: OUTBOARD MARINE CORPORATION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 014192/0652 →
Nunc Pro Tunc Assignment Dec 15, 2003
From: OUTBOARD MARINE CORPORATION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 014192/0432 →
Nunc Pro Tunc Assignment Dec 15, 2003
From: OUTBOARD MARINE CORPORATION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 014192/0532 →
Assignment of Assignor's Interest Dec 16, 2003
From: OUTBOARD MARINE CORPORATRION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 014196/0612 →
Bankruptcy Court Order Authorizing Sale of Certain Assets of the Debtors Free and Clear of Liens. Dec 16, 2003
From: OUTBOARD MARINE CORPORATION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 014196/0466 →
Nunc Pro Tunc Assignment Dec 19, 2003
From: OUTBOARD MARINE CORPORATION
To: BOMBARDIER MOTOR CORPORATION OF AMERICA
Reel/Frame 014201/0927 →
Assignment of Assignor's Interest Apr 27, 2004
From: BOMBARDIER MOTOR CORPORATION OF AMERICA
To: BOMBARDIER RECREATIONAL PRODUCTS INC.
Reel/Frame 014532/0126 →
Assignment of Assignor's Interest Apr 27, 2004
From: BOMBARDIER MOTOR CORPORATION OF AMERICA
To: BOMBARDIER RECREATIONAL PRODUCTS INC.
Reel/Frame 014532/0242 →
Assignment of Assignor's Interest Apr 27, 2004
From: BOMBARDIER MOTOR CORPORATION OF AMERICA
To: BOMBARDIER RECREATIONAL PRODUCTS INC.
Reel/Frame 014532/0362 →
Assignment of Assignor's Interest Apr 27, 2004
From: BOMBARDIER MOTOR CORPORATION OF AMERICA
To: BOMBARDIER RECREATIONAL PRODUCTS INC.
Reel/Frame 014653/0729 →
Assignment of Assignor's Interest Apr 28, 2004
From: BOMBARDIER MOTOR CORPORATION OF AMERICA
To: BOMBARDIER RECREATIONAL PRODUCTS INC.
Reel/Frame 014546/0442 →
Security Interest Apr 29, 2004
From: BOMBARDIER RECREATIONAL PRODUCTS INC.
To: BANK OF MONTREAL
Reel/Frame 014546/0629 →
Release of Patents Jun 30, 2004
From: GENERAL ELECTRIC CAPITAL CORPORATION AS AGENT
To: GENMAR IP LLC
Reel/Frame 014797/0326 →
Security Agreement Oct 5, 2006
From: BRP US INC.
To: BANK OF MONTREAL, AS ADMINISTRATIVE AGENT
Reel/Frame 018350/0269 →
Security Agreement Nov 5, 2007
From: GENMAR IP LLC
To: WELLS FARGO BANK, NATIONAL ASSOCIATION
Reel/Frame 020064/0582 →
Assignment of Assignor's Interest Aug 8, 2010
From: GENMAR IP, L.L.C.
To: PROJECT BOAT INTERMEDIATE HOLDINGS II, LLC
Reel/Frame 024804/0193 →