Patent Assignment
Reel/Frame 016958/0340
Release of Security Interests in Patent Rights
Recorded: 2006-01-03
Received: 2006-01-03
Pages: 12
Assignor
Assignee
SEAGATE TECHNOLOGY LLC
920 DISC DRIVE, SCOTTS VALLEY, CA, 95066, UNITED STATES
Covered Properties
(85)
Primer-Less Abrasion Coating for Organic Glass Articles
Application:
11/103,373 →
Disc Head Slider Having a Film Representing an Information Pattern
Application:
10/202,317 →
Top Cover Installation Process for a Disc Drive
Application:
10/154,192 →
Disc Drive Magnetic Latch Mechanism
Application:
10/104,701 →
Actuator Assembly Retaining Clip
Application:
10/104,698 →
Disk Drive Pass-Through Connector
Application:
10/091,301 →
Attachment and Microactuation Aids in a Laminated Suspension
Application:
10/059,600 →
Model Reference Generator for a Disc Drive
Application:
10/034,814 →
Head with Active Fly Height Control
Application:
10/027,937 →
Compressive Limit Stop in a Disc Drive
Application:
10/024,819 →
Bearing Performance Enhancement Utilizing Sleeve/Hub Radial Surfaces
Application:
10/017,244 →
Disc Drive Actuator Assembly Drag Reduction Features
Application:
09/996,408 →
Disc Separator Plate with Air Dam
Application:
10/000,685 →
Airflow Control Device for a Disc Drive
Application:
09/999,701 →
Slider with Furrows for Flushing Contaminants and Lubricant
Application:
10/001,661 →
Advanced Glidehead Sensor for Small Slider
Application:
09/981,533 →
Protective Coating for a Magneto-Optical Disc
Application:
09/977,102 →
Closed Loop Spindle Motor Acceleration Control in a Disc Drive
Application:
09/966,673 →
Method and Apparatus for Determining Equalized Signal-to-Noise Ratio in a Storage Device
Application:
09/964,302 →
Disc Head Slider Having Convergent Channel Features with Leading Edge Inlet
Application:
09/962,299 →
Disc Drive Spindle Motor Having Reduced Acoustic Noise
Application:
09/963,229 →
Medium with a Seed Layer and a B2-Structured Underlayer
Application:
09/960,538 →
Method and Apparatus for Minimizing Slider Fly Heights Over Patterned Media
Application:
09/952,122 →
Magnetic Recording Medium with High Density, Thin Dual Carbon Overcoats
Application:
09/946,934 →
Disc Head Slider Having Profiled Convergent Channel Features
Application:
09/945,919 →
Phase Frequency Detector Circuit Having Reduced Dead Band
Application:
09/946,324 →
Disc Drive Slider Having Textured Pads
Application:
09/939,174 →
Method and System for Suppressing Spurious Reflections
Application:
09/938,225 →
Disc Clamp Having Adjustable Balance Ring
Application:
09/934,164 →
Air Bearing Slider with Corner Steps
Application:
09/926,000 →
Head with Magnetic and Non-Magnetic Seed Layers
Application:
09/923,981 →
Near Field Magneto-Optical Head Having Read and Write Pinhole Apertures
Application:
09/921,531 →
Eliminating Gel Particle-Related Defects for Obtaining Sub-Micron Flyability Over Sol-Gel - Coated Disk Substrates
Application:
09/910,812 →
Method of Fabricating a Spin Valve/Gmr Sensor Having a Synthetic Antiferromagnetic Layer Pinned by Mn-Alloy
Application:
09/907,219 →
Tubular Gasket for a Disc Drive
Application:
09/905,382 →
Corrosion Resistant Magnetic Thin Film Media
Application:
09/902,600 →
Optimising Allocation of Sectors in Disc Drives
Application:
09/903,353 →
Flyability and Glide Methodology for 100 Gpsi
Application:
09/901,830 →
Process and Apparatus for Finishing a Magnetic Slider
Application:
09/901,321 →
Disc Drive with Converging Filter Inlet for Faster Cleanup Times
Application:
09/896,318 →
Low Power High Speed Disc Drive Spindle Seal
Application:
09/895,052 →
Amplitude Decay of Magnetic Storage Medium
Application:
09/896,643 →
Thermal Compensation Without Creep in a Hydrodynamic Bearing
Application:
09/896,445 →
Configuration of Channel-to-Controller Interface in a Disc Drive
Application:
09/894,981 →
Disc Drive Component Level Shock Tester
Application:
09/894,639 →
Non-Destructive Defective Magneto-Resistive Head Detection Utilizing a Micro-Track
Application:
09/892,154 →
Dissolving Shunt Connection System for Esd Sensitive Components
Application:
09/892,303 →
Contamination Resistant Probe Attachment Device
Application:
09/886,694 →
Sputtering Target Assembly and Method for Depositing a Thickness Gradient Layer with Narrow Transition Zone
Application:
09/884,482 →
Voice Coil Motor Attachment for a Hard Disc Assembly
Application:
09/885,338 →
Apparatus and Method for Setting Bearing Gaps in an Electric Motor
Application:
09/881,947 →
Disc Drive Bottom Mounting Through a Shield Plate
Application:
09/880,325 →
Head Slap Characterization Using Optical Surface Analyzer
Application:
09/879,739 →
Combined Servo-Tracking and Preload-Controlling Microactuator
Application:
09/876,463 →
Gamma Irradiated Load/Unload Ramp and Method for Preparing the Same
Application:
09/872,137 →
Target Fabrication Method for Cylindrical Cathodes
Application:
09/871,051 →
Vacuum Plate Disc Stabilizer for a Spin-Stand Tester Used for Testing a Head-Gimbal Assembly
Application:
09/864,347 →
Disc-Drive Mounting Using Adhesive Films
Application:
09/862,163 →
Disc Clamp with Shape Memory Alloys
Application:
09/860,218 →
Method of Overflow-Based Defect Management Representation
Application:
09/860,826 →
Quad-Layer Gmr Sandwich
Application:
09/787,050 →
Dual Stage Positioning System Using a Shared Voltage Source
Application:
09/855,354 →
Perpendicular Recording Media with Enhanced Coercivity
Application:
09/845,167 →
Low-Birefringence Optical Fiber for Use in an Optical Data Storage System
Application:
09/844,378 →
Method of Manufacturing Magnetic Recording Media with High Snr and High Thermal Stability
Application:
09/840,919 →
Quinolone Carboxylic Acid Compositions and Related Methods of Treatment
Application:
09/840,871 →
Data Handling System with Flux-Directing Voice Coil Motor
Application:
09/836,800 →
Writer Pole Employing a High Saturation Moment, Low Permeability Layer Adjacent to Writer Gap
Application:
09/835,530 →
Ultrathin Protective Overcoats for Magnetic Materials
Application:
09/835,120 →
Method of Manufacturing Rounded Edge Recording Head
Application:
09/829,285 →
Method for Controlling Mre Stripe Height
Application:
09/828,489 →
Self-Service Checkout System with Rfid Capability
Application:
09/824,825 →
Apparatus and Method to Passivate Magnets and Magnetic Materials
Application:
09/820,550 →
Cartridge Screening Method with Pin-Point Capabilities on the Causes of Defects
Application:
09/815,687 →
Sub-Tenth Micron Misfet with Source and Drain Layers Formed Over Source and Drains, Sloping Away from the Gate
Application:
09/798,924 →
Cartridge Screening Technique by Using the Electrical Dynamic Bearing Resistance
Application:
09/792,884 →
Testing a Write Transducer as a Reader
Application:
09/790,846 →
Machining Process for Hydrodynamic Bearing
Application:
09/782,388 →
Disc Drive with Actuator Arm Configured for Reduced Out-of-Phase Motion
Application:
09/778,163 →
Method and Apparatus for Testing a Magnetic Head
Application:
09/776,024 →
Drive-Level Bearing Friction Measurement Method
Application:
09/773,972 →
High Coercivity Magnetic Recording Medium Comprising a Sputter Textured Layer
Application:
09/768,357 →
Optimally Designed Parsimonious Repetitive Learning Compensator for Hard Disc Drives Having High Track Density
Application:
09/759,754 →
Perpendicular Magnetic Recording Head with Radial Magnetic Field Generator Which Reduces Noise from Soft Magnetic Underlayer of Recording Disk
Application:
09/759,948 →
Magnetic Recording Head with a Precision Throatheight-Defining Structure
Application:
09/755,504 →