IP Library › Assignment 016945/0679
Patent Assignment
Reel/Frame 016945/0679

Release of Security Interests in Patent Rights

Recorded: 2005-12-29 Pages: 12
Assignor
Assignee
SEAGATE TECHNOLOGY LLC
920 DISC DRIVE, SCOTTS VALLEY, CALIFORNIA, 95066
Covered Properties (219)
Three Flange Carriage Structure for Improved Voice Coil Support
Patent: 5,764,440 →
Application: 08/024,539 →
Apparatus and Method for High Throught Sputtering
Patent: 5,814,196 →
Application: 08/046,215 →
Data Track Following Method for Disc Drives
Patent: 5,777,816 →
Application: 08/060,858 →
Disc Drive Transducer Deadbeat Settle Method Utilizing Internal Correction
Patent: 5,691,617 →
Application: 08/117,190 →
Low Height Disk Drive
Patent: 5,847,896 →
Application: 08/135,307 →
Composite Mask Process for Semiconductor Fabrication
Patent: 5,679,586 →
Application: 08/138,606 →
Split Ring Mounting for Disk Drive Spindle and Actuator Shafts
Patent: 5,859,745 →
Application: 08/146,311 →
Electric Field Modulated Mr Sensor
Patent: 5,825,593 →
Application: 08/198,848 →
Compensating for Variations in Torque Capability of Voice Coil Motors
Patent: 5,835,302 →
Application: 08/215,192 →
Method for Carrying Out Seeks in a Hard Disc Drive to Limit the Generation of Acoustic Noise Including Using a Slew Rate Limit
Patent: 5,696,647 →
Application: 08/218,607 →
Audible Noise Reduction in a Disc Drive
Patent: 5,847,476 →
Application: 08/268,153 →
Autonomous High Speed Linear Space Address Mode Translation for Use with a Computer Hard Disc System
Patent: 5,715,418 →
Application: 08/281,445 →
Architecture for 2-1/2 Inch Diameter Single Disk Drive
Patent: 5,808,830 →
Application: 08/291,147 →
Mr Sensor Having Thick Active Region Between Two Thinner Inactive Mr Regions Topped with Respective Permanent Magnets
Patent: 5,712,565 →
Application: 08/302,799 →
Disc Drive Controller with Apparatus and Method for Automatic Transfer of Cache Data
Patent: 5,696,931 →
Application: 08/303,415 →
Apparatus and Method for Sputtering Carbon
Patent: 5,830,331 →
Application: 08/311,529 →
Embedded Header for Split Data Sectors in Zoned Bit Recorded Disc Drives
Patent: 5,754,351 →
Application: 08/338,626 →
Autonomous Selection of Output Buffer Characteristics as Determined by Load Matching
Patent: 5,677,639 →
Application: 08/352,375 →
System and Method for Controlling a Seek Operation in a Disk Drive
Patent: 5,677,808 →
Application: 08/359,106 →
Block Address Integrity Check for Storage Medium
Patent: 5,717,535 →
Application: 08/377,867 →
Mutli-Layer Magnetic Recording Media
Patent: 5,750,270 →
Application: 08/385,107 →
Apparatus and Method for Controlling High Throughput Sputtering
Patent: 5,831,851 →
Application: 08/407,826 →
Detection of Starting Motor Position in a Brushless Dc Motor
Patent: 5,841,252 →
Application: 08/414,312 →
Read Sensitivity Mr Head Using Permanent Magnet Longitudinal Stabilization
Patent: 5,737,155 →
Application: 08/420,450 →
Method for Forming a Magnetic Thin Film Head with Recessed Basecoat
Patent: 5,699,605 →
Application: 08/421,429 →
Low Leakage Actuator for High Performance
Patent: 5,698,911 →
Application: 08/443,432 →
High Density Redundant Array of Independent Disks in a Chassis Having a Door with Shock Absorbers Held Against the Disks When the Door Is Closed
Patent: 5,777,845 →
Application: 08/448,761 →
Retaining Ring for Disc Drive Spindle Motor
Patent: 5,774,974 →
Application: 08/460,076 →
Wafer Including Scribe Line Grooves for Separating Thin Film Heads and Process for Making the Same
Patent: 5,835,315 →
Application: 08/466,323 →
Single Plate Hydrodynamic Bearing with Self-Balancing Fluid Level and Fluid Circulation
Patent: 5,685,647 →
Application: 08/472,338 →
Disk Drive Apparatus with Power Conservation Capability
Patent: 5,872,669 →
Application: 08/473,726 →
Disc Drive with Self-Pressurizing Fluid Bearing and Shaft-Supporting- Ball Retaining Element
Patent: 5,710,678 →
Application: 08/478,975 →
Rate 4/5 Trellis Code for PR4 Channels with Improved Error Propagation
Patent: 5,691,993 →
Application: 08/483,117 →
Read Sensitivity Function for Barberpole Bias Design Magnetoresistive Sensor Having Curved Current Contacts
Patent: 5,682,284 →
Application: 08/483,118 →
Miniature Head Disc Drive System Voice Coil Motor with Single Coil and Dual Stationary Magnets
Patent: 5,808,838 →
Application: 08/484,682 →
Apparatus Having a Circular Buffer That Maintains a One Entry Gap Between Elements Written to the Microprocessor and Elements Operated on by the Clock
Patent: 5,745,793 →
Application: 08/485,965 →
Head Gimbal Assembly to Reduce Slider Distortion Due to Thermal Stress
Patent: 5,774,305 →
Application: 08/486,009 →
Fast Ata-Compatible Drive Interface with Error Detection and/or Error Correction
Patent: 5,784,390 →
Application: 08/491,513 →
Thin Film Magnetic Head Including Vias Formed in Alumina Layer and Process for Making the Same
Patent: 5,820,770 →
Application: 08/502,442 →
Stackable Actuator Assembly Havig Spring Retaining System
Patent: 5,844,754 →
Application: 08/511,526 →
System and Method for Early Disc Drive Fault Detection
Patent: 5,737,519 →
Application: 08/518,105 →
Multiphoton Photorefractive Holographic Recording Media
Patent: 5,699,175 →
Application: 08/525,823 →
Adaptive Analog Transversal Equalizer
Patent: 5,682,125 →
Application: 08/536,008 →
Selection of Optimum Write Current in a Disc Drive to Minimize the the Occurrence of Repeatable Read Errors
Patent: 5,687,036 →
Application: 08/536,958 →
Multi-Phase Overcoats for Magnetic Discs
Patent: 5,785,825 →
Application: 08/538,124 →
Methods for Detecting Tyrosine Kinase-Binding Target Proteins and Identifying Substances That Affect SH2 Phosphorylated Ligand Regulatory Systems
Patent: 5,858,686 →
Application: 08/539,005 →
Spindle Motor Having Overmolded Stator
Patent: 5,694,268 →
Application: 08/550,175 →
Disc Drive Reset Using Power Valid, Clocks Valid and Delay Criteria
Patent: 5,742,800 →
Application: 08/550,714 →
Apparatus and Method for High Throughput Sputtering
Patent: 5,683,561 →
Application: 08/552,250 →
Air Vane Latch Incorporating Top Cover Profiling
Patent: 5,768,057 →
Application: 08/553,068 →
Method for Detection of Slider-Disk Contact
Patent: 5,742,446 →
Application: 08/555,241 →
Method and Apparatus for Recording Defective Track Identification Information in a Disk Drive
Patent: 5,784,216 →
Application: 08/559,328 →
Method of Making a Magneforesistive Sensor
Patent: 5,669,133 →
Application: 08/563,563 →
Hydrodynamic Bearing with Reduced Temperature Sensitivity
Patent: 5,697,708 →
Application: 08/563,589 →
Disk Drive Architecture Including a Current-Induced Latching Device
Patent: 5,796,557 →
Application: 08/567,859 →
Coding Data in Disc Drive According to a Code Having Desired Algebraic Characteristics
Patent: 5,790,571 →
Application: 08/568,879 →
Sequential Numerical Information Encoder and Decoder
Patent: 5,737,596 →
Application: 08/570,141 →
Diamond-Like Carbon Wet Etchant Stop for Formation of Magnetic Transducers
Patent: 5,681,426 →
Application: 08/571,469 →
Storage and Addressing Method for a Buffer Memory Control System for Accessing User and Error Information
Patent: 5,765,203 →
Application: 08/574,669 →
Method of Detecting and Isolating Defective Servo Bursts
Patent: 5,710,677 →
Application: 08/575,414 →
Method and Apparatus for Protecting Magnetoresistive Sensor Element from Electrostatic Discharge
Patent: 5,748,412 →
Application: 08/580,059 →
Apparatus for Attaching a Printed Circuit Cable to Actuator Arm Disc Drive Assembly
Patent: 5,680,277 →
Application: 08/581,758 →
Method of Manufacturing a Bicrystal Cluster Magnetic Recording Medium
Patent: 5,733,370 →
Application: 08/586,529 →
Bicrystal Cluster Magnetic Recording Medium
Patent: 5,830,584 →
Application: 08/586,571 →
Multirate Digital Control System for Use with a System Having a Linear Transfer Function, Such as a Head Positioning System in a Magnetic Disc Drive
Patent: 5,721,648 →
Application: 08/589,791 →
Method and Apparatus for Dynamic Low Voltage Spindle Motor Operation
Patent: 5,675,230 →
Application: 08/589,792 →
Disc Drive System Using Multiple Pairs of Embedded Servo Bursts
Patent: 5,867,341 →
Application: 08/594,114 →
Method and Apparatus for Implementing Codes with Maximum Transition Run Length
Patent: 5,731,768 →
Application: 08/594,987 →
Time Optimal Control of a Disc Drive Actuator with Vibro-Acoustic Constraints
Patent: 5,668,680 →
Application: 08/608,019 →
Sputter Textured Magnetic Recording Medium
Patent: 5,718,811 →
Application: 08/608,072 →
Method of Manufacturing Cocrta/Cocrtapt Bi-Layer Magnetic Thin Films
Patent: 5,772,857 →
Application: 08/608,142 →
Voice Coil Actuated Bi-Stable Latch Assembly
Patent: 5,717,548 →
Application: 08/610,270 →
Disc Drive Spindle Motor with Rotor Isolation and Controlled Resistance Electrical Pathway from Disc to Ground
Patent: 5,729,404 →
Application: 08/611,285 →
Setting Bearing Preload Utilizing Thermal Expansion/Contraction
Patent: 5,801,902 →
Application: 08/613,827 →
High Areal Density Magnetic Recording Medium with Dual Magnetic Layers
Patent: 5,763,071 →
Application: 08/614,848 →
Dynamic Compensation of Servo Burst Measurement Offsets in a Disc Drive
Patent: 5,774,297 →
Application: 08/621,659 →
Disc Drive Actuator Incorporating Injection Molding, Flying Leads, and Locking Flanges
Patent: 5,734,528 →
Application: 08/622,616 →
Selection of Optimal Read/Write Channel Parameters in a Hard Disc Drive
Patent: 5,774,285 →
Application: 08/622,665 →
Crc Checking Using a Crc Generator in a Multi-Port Design
Patent: 5,802,080 →
Application: 08/623,508 →
Method and Apparatus Employing System for Recirculating Liquid in a Controlled Environment
Patent: 5,680,273 →
Application: 08/626,917 →
Machining Guide Method for Magnetic Recording Reproduce Heads
Patent: 5,722,155 →
Application: 08/629,524 →
Space Efficient Magnetic Toggle Latch Assembly for a Disc Drive Actuator
Patent: 5,694,271 →
Application: 08/634,345 →
Spindle Motor Connector Having Supported Electrical Leads
Patent: 5,705,868 →
Application: 08/637,500 →
Pin Straightening Tool for a Multi-Pin Connector
Patent: 5,730,191 →
Application: 08/637,871 →
Process for Assembling a Clamp Ring to a Disk Stack Assembly
Patent: 5,732,458 →
Application: 08/638,815 →
System Including Ata Sequencer Microprocessor Which Executes Sequencer Instructions to Handle Plurality of Real-Time Events Allowing to Perform All Operations Without Local Microprocessor Intervention
Patent: 5,701,450 →
Application: 08/639,243 →
Disc Head Slider Having Center Rail with Asymmetric Edge Steps
Patent: 5,774,304 →
Application: 08/642,755 →
Wire Carrier for Disk Drive
Patent: 5,805,377 →
Application: 08/643,230 →
Nickel-Manganese as a Pinning Layer in Spin Valve/Gmr Magnetic Sensors
Patent: 5,764,056 →
Application: 08/645,645 →
Disc Drive Clamp Fastener Including a Clamp Disc Indentation
Patent: 5,801,901 →
Application: 08/646,883 →
Laser Texturing of Magnetic Recording Medium Using a Crystal Material
Patent: 5,783,797 →
Application: 08/647,407 →
Grooved Hydrodynamic Bearing Arrangement Including a Porous Lubricant Reservoir
Patent: 5,678,929 →
Application: 08/650,303 →
Servo Position Error Signal Calibration in a Hard Disc Drive
Patent: 5,760,990 →
Application: 08/652,323 →
Method to Predict an Accurate Mr Sensor Dimension When Viewed from Abs
Patent: 5,742,995 →
Application: 08/653,617 →
Novel Utilization of Ferroelectric Domain Screening for High Capacity Holographic Memory
Patent: 5,822,090 →
Application: 08/654,923 →
Method for Carrying Out Seeks in a Hard Disc Drive to Limit the Generation of Acoustic Noise
Patent: 5,726,825 →
Application: 08/656,580 →
Method for Carrying Out Seeks in a Hard Disc Drive to Limit the Generation of Acoustic Noise
Patent: 5,760,992 →
Application: 08/656,609 →
Insulated Wire Guides for an Actuator Assembly
Patent: 5,731,930 →
Application: 08/656,612 →
Method for Carrying Out Seeks in a Hard Disc Drive to Limit the Generation of Acoustic Noise
Patent: 5,751,513 →
Application: 08/657,689 →
Mechanical Shock Protection for a Disc Drive
Patent: 5,801,899 →
Application: 08/659,338 →
Slider-Suspension in a Disc Drive
Patent: 5,712,748 →
Application: 08/661,599 →
Method and Apparatus for Compensating Track Position Due to Written-in Runout Error in a Disc Drive
Patent: 5,825,578 →
Application: 08/661,623 →
Method of Forming a Suspension Fabricated from Silicon
Patent: 5,711,063 →
Application: 08/661,816 →
Flexure Having Displaced Gimbal Bond Tongue with End Terminated Heads
Patent: 5,781,378 →
Application: 08/662,246 →
Barberpole Mr Sensor Having Interleaved Permanent Magnet and Magnetoresistive Segments
Patent: 5,737,156 →
Application: 08/667,276 →
Method of Making a Thin-Film Transducer Design for Undershoot Reduction
Patent: 5,737,826 →
Application: 08/667,867 →
Dual Servo Format for Optimum Format Efficiency and Off-Track Detection
Patent: 5,784,219 →
Application: 08/669,223 →
Low Sway Space Chassis for a Disc Drive Having a Vibro-Acoustic Isolator
Patent: 5,777,821 →
Application: 08/671,704 →
Slider with Protective Dlc or Nonhygroscopic Coating on the Trailing Edge Face
Patent: 5,781,377 →
Application: 08/675,377 →
Slider with Oblique Leading and Trailing Edges
Patent: 5,748,407 →
Application: 08/675,384 →
Stiction Model for a Head-Disc Interface of a Rigid Disc Drive
Patent: 5,742,518 →
Application: 08/676,718 →
Swage Plate Bumper for Disc Drive
Patent: 5,754,371 →
Application: 08/677,134 →
Disc Drive System with Slider for Reading and Writing Adjacent Portions of a Zone-Textured Disc.
Patent: 5,734,522 →
Application: 08/677,874 →
Low-Power Hard Disk Drive System Architecture
Patent: 5,854,720 →
Application: 08/678,198 →
Seeded Underlayer in Magnetic Thin Films
Patent: 5,858,566 →
Application: 08/678,424 →
Head Positioning in Storage System During Periods of Inactivity
Patent: 5,859,738 →
Application: 08/680,352 →
Adaptive Recovery of Read and Write Errors in a Disc Drive
Patent: 5,721,816 →
Application: 08/681,943 →
Panelized Printed Circuit Cables for High Volume Printed Circuit Cable Manufacturing
Patent: 5,783,370 →
Application: 08/685,705 →
Pivoting Ramp for Dynamic Load/Unload Files
Patent: 5,764,437 →
Application: 08/686,199 →
Self-Synchronization in a Magnetic Recording Channel Utilizing Time-Domain Equalization
Patent: 5,854,717 →
Application: 08/690,905 →
Support Flange Having Electrical Contacts to Provide Electrical Continuity Upon Spindle Motor Mounting to Base
Patent: 5,815,345 →
Application: 08/692,859 →
Magnetic Disc with Carbon Protective Layer Having Regions Differing in Hardness
Patent: 5,824,387 →
Application: 08/694,155 →
Method of Fabricating a Contoured Slider Surface Feature with a Single Mask
Patent: 5,853,959 →
Application: 08/695,374 →
Inverted Magnetoresistive Head
Patent: 5,668,689 →
Application: 08/695,756 →
Adaptive Calibration of Read/Write Elements in a Disc Drive
Patent: 5,774,299 →
Application: 08/696,120 →
Suspension Assembly Shock Absorber
Patent: 5,831,793 →
Application: 08/698,039 →
Scsi-Coupled Module for Monitoring and Controlling Scsi-Coupled Raid Bank and Bank Environment
Patent: 5,835,700 →
Application: 08/698,951 →
Magnetic Recording Medium with Partially Oxidized Seed Layer
Patent: 5,866,227 →
Application: 08/699,759 →
Servo Track Writer with Tuned Damper
Patent: 5,774,294 →
Application: 08/701,164 →
Self-Loading Disc Head Slider Having Blunt Cross Rail
Patent: 5,721,650 →
Application: 08/703,072 →
Process for Assembling a Clamp Ring to a Disk Stack Assembly
Patent: 5,724,718 →
Application: 08/705,056 →
Magnetic Head Sub-Ambient Air Pressure Slider for a Disk Drive Device or the Like
Patent: 5,739,981 →
Application: 08/707,827 →
Flex on Suspension Design Minimizing Sensitivities to Environmental Stresses
Patent: 5,701,218 →
Application: 08/712,276 →
Disc Drive Cartridge Including Magnetic Bearings
Patent: 5,808,839 →
Application: 08/714,507 →
Single Poly Devices for Monitoring the Level and Polarity of Process Induced Charging in a Mos Process
Patent: 5,844,300 →
Application: 08/716,843 →
Disc Drive Spindle Motor with Controlled Resistance Pathway from Disc to Ground
Patent: 5,844,748 →
Application: 08/719,589 →
Hygroscopically Balanced Gimbal Structure
Patent: 5,805,381 →
Application: 08/721,255 →
Diamond-Like Carbon Encapsulation of Magnetic Heads
Patent: 5,718,949 →
Application: 08/722,910 →
Electrostatic Grounding System for a Manually Operated Fluid Dispenser
Patent: 5,855,301 →
Application: 08/723,261 →
Actuator Arm Bumper in a Disc Drive
Patent: 5,864,444 →
Application: 08/724,547 →
Universal Bond Pad Configuration
Patent: 5,796,549 →
Application: 08/729,786 →
Data Storage Format for Data Storage Devices Having a Radial Offset Between Read and Write Elements
Patent: 5,751,512 →
Application: 08/730,564 →
Slotless Spindle Motor for Disc Drive
Patent: 5,850,318 →
Application: 08/731,073 →
Method of Facilitating Installation or Use of an Electronic Information-Storage Device Drive Assembly
Patent: 5,732,464 →
Application: 08/735,262 →
Small Foot Machining Guide for Recording Heads
Patent: 5,755,612 →
Application: 08/738,693 →
Transverse Pin Mounting of Head/Gimbal Assemblies in a Disc Drive
Patent: 5,731,932 →
Application: 08/748,695 →
Method of Making an Insulator Pattern for Thin Film Head Sliders
Patent: 5,774,975 →
Application: 08/749,994 →
Grooved Hydrodynamic Thrust Bearing
Patent: 5,795,074 →
Application: 08/750,486 →
Constrain Layer Damping of a Disc Drive Printed Wiring Assembly
Patent: 5,757,580 →
Application: 08/757,837 →
Method of Forming a Magnetic Media
Patent: 5,858,474 →
Application: 08/757,850 →
Low Speed Burnishing of Asperities in a Disc Drive
Patent: 5,863,237 →
Application: 08/760,388 →
Disc Centering Sleeve for a Disc Drive
Patent: 5,828,518 →
Application: 08/767,710 →
Disk Clamp with Clamp Load Carrying Beams
Patent: 5,761,002 →
Application: 08/767,712 →
Female Connectors for Mating with 3-in-1 Ide Interface and Power Connector with Recesses and Projections for Facilitating Engagement
Patent: 5,865,651 →
Application: 08/767,774 →
Novel Disc Centering Device for a Disc Drive
Patent: 5,781,374 →
Application: 08/768,745 →
System and Method Using Optical Fibers in a Data Storage and Retrieval System
Patent: 5,850,375 →
Application: 08/771,057 →
Velocity Sensing Using Actuator Coil Back-Emf Voltage
Patent: 5,844,743 →
Application: 08/771,314 →
Self-Aligning, Mating Electronic Connector Assembly
Patent: 5,816,842 →
Application: 08/772,171 →
Interference Suppression Subsystem
Patent: 5,825,179 →
Application: 08/778,567 →
Multisample Dynamic Headspace Sampler
Patent: 5,708,219 →
Application: 08/780,883 →
Calibration Method for Multisample Dynamic Headspace Sample
Patent: 5,773,707 →
Application: 08/780,885 →
Multisample Dynamic Headspace Sampler
Patent: 5,753,791 →
Application: 08/780,886 →
Dynamic Compensation of Servo Burst Measurement Offsets in a Disc Drive
Patent: 5,835,300 →
Application: 08/791,349 →
Method and Apparatus for Implementing Run Length Limited Codes
Patent: 5,781,133 →
Application: 08/792,194 →
Electrical Lap Guide Wiring Configuration
Patent: 5,816,890 →
Application: 08/793,718 →
Disc Clamping System for a Hard Disc Drive
Patent: 5,731,928 →
Application: 08/794,152 →
Method of Characterizing Exchange Coupling for Magnetoresistive Sensor
Patent: 5,776,537 →
Application: 08/794,421 →
Method of Laser Texturing Glass or Glass-Ceramic Substrates for Magnetic Recording Media
Patent: 5,714,207 →
Application: 08/796,830 →
Method for Controlling Sensor-to-Sensor Alignment and Material Properties in a Dual Magnetoresistive Sensor
Patent: 5,721,008 →
Application: 08/801,126 →
Reversed Order Nimn Exchange Biasing for Dual Magnetoresistive Heads
Patent: 5,766,780 →
Application: 08/801,127 →
Fixed Crash Stop
Patent: 5,764,436 →
Application: 08/811,113 →
Clamp Ring for a Disk Stack Assembly
Patent: 5,712,746 →
Application: 08/811,509 →
Disk Caddy and Lid with Barrier Means
Patent: 5,833,067 →
Application: 08/814,119 →
Matched Spectral Null Encoder/Decoder
Patent: 5,801,649 →
Application: 08/817,865 →
A Base Plate with Improved Swage Performance and Reduced Mass
Patent: 5,812,343 →
Application: 08/818,929 →
Precision 2-Part Epoxy Dispensing Apparatus and Method
Patent: 5,801,951 →
Application: 08/820,714 →
Servo Frame Defect Mapping in a Hard Disc Drive
Patent: 5,870,243 →
Application: 08/824,522 →
Insertable Miniature Hard Disc Drive Having a Reduced Size Transducer Head Suspension
Patent: 5,835,310 →
Application: 08/825,973 →
Mechanism to Dampen Vibration of a Stop Pin of a Disc Drive Actuator Arm
Patent: 5,805,387 →
Application: 08/826,278 →
Lapping Guide System, Method and Article of Manufacture
Patent: 5,738,566 →
Application: 08/829,219 →
Method of Applying Lubricant to Magnetic Disc
Patent: 5,820,945 →
Application: 08/831,050 →
Multi-Impact Thermal Asperity Sensor Head
Patent: 5,825,181 →
Application: 08/831,070 →
Reduction of Liquid and Smear Collection/ Pickup by Sliders
Patent: 5,768,056 →
Application: 08/831,688 →
Hydrodynamic Seal for Disc Drive Spindle Motor
Patent: 5,841,607 →
Application: 08/835,241 →
Disk Drive Stiction Release System
Patent: 5,801,505 →
Application: 08/835,837 →
Device and Process for in-System Programming Electrically Erasable and Programmable Non-Volatile Memory
Patent: 5,784,611 →
Application: 08/839,463 →
Integrated Piezoelectric and Thermal Asperity Transducers for Testing Disc Media in High Performance Disc Drives
Patent: 5,872,311 →
Application: 08/839,992 →
Flexure Mounting Plate with Deswaging Tabs
Patent: 5,757,586 →
Application: 08/842,632 →
Rotary Drive Accelerator
Patent: 5,801,311 →
Application: 08/846,278 →
Actuator Bias Prediction Using Lookup-Table Hysteresis Modeling
Patent: 5,872,674 →
Application: 08/846,545 →
Apparatus for Filling a Hydrodynamic Bearing
Patent: 5,862,841 →
Application: 08/847,274 →
Measuring Stiction and Friction Between the Heads and Discs of a Hard Disc Drive
Patent: 5,859,358 →
Application: 08/847,652 →
Multiphoton Photorefractive Holographic Recording Media
Patent: 5,864,412 →
Application: 08/847,727 →
Miniature Hard Disc System Having Single Voice Coil Magnet Motor
Patent: 5,841,610 →
Application: 08/847,934 →
Taperless/Crown Free/Air Bearing Design
Patent: 5,870,251 →
Application: 08/849,476 →
Gimbal Suspension for Supporting a Head in a Disc Drive Assembly
Patent: 5,856,896 →
Application: 08/852,225 →
Mr Sensors with Selected Resistances for the Sensing and Biasing Layers to Enhance Reading Capabilities
Patent: 5,828,528 →
Application: 08/853,262 →
Head-Gimbal Assembly with Reduced Vertical Spacing Envelope and Alignment Structures
Patent: 5,850,320 →
Application: 08/854,905 →
Thermal Asperity Sensor Head with Multiple Spaced Asperity Sensors
Patent: 5,808,184 →
Application: 08/855,325 →
Read Sensitivity Mr Head Using Permanent Magnet Longitudinal Stabilization
Patent: 5,736,060 →
Application: 08/863,606 →
Low Distortion Interference Fits for Spindle Motor Assembly
Patent: 5,793,129 →
Application: 08/866,810 →
Apparatus and Process for Managing Defective Headerless Sectors
Patent: 5,818,654 →
Application: 08/869,041 →
Disc Drive Flex Assembly Having a Low Particulating Circuit Board
Patent: 5,834,084 →
Application: 08/869,567 →
Actuator Latch Activated by Head Gram Load for Hard Disc Drives
Patent: 5,805,384 →
Application: 08/871,140 →
Controlled Laser Texturing Glass-Ceramic Substrates for Magnetic Recording Media
Patent: 5,853,820 →
Application: 08/880,368 →
Internal Accelerometer for Improved Servo Performance and Shock Sensing on High Performance Disc Drive Heads
Patent: 5,856,895 →
Application: 08/887,499 →
Multisample Dynamic Headspace Sampler
Patent: 5,869,741 →
Application: 08/892,012 →
Multisample Dynamic Headspace Sampler
Patent: 5,859,356 →
Application: 08/892,013 →
Microactuator for Fine Focusing a Slider-Mounted Lens of an Optical Disc Drive
Patent: 5,828,644 →
Application: 08/895,257 →
Glide Detect Head with Predictable Asperity Contact Region
Patent: 5,817,931 →
Application: 08/897,524 →
High/Friction/Lower Clamping Force Mechanism for Discs in a Disc Drive
Patent: 5,838,516 →
Application: 08/897,855 →
Method and Apparatus for Testing a Spindle in a Disc Drive
Patent: 5,856,624 →
Application: 08/904,201 →
Dual Fiber Optic Laser Texturing
Patent: 5,837,330 →
Application: 08/919,601 →
Slider for Optical Disc Data Storage System
Patent: 5,870,362 →
Application: 08/920,243 →
Magnetic Recording Disc Having an Idle Fly Bone and Tapering Transition Zones on Each Side Thereof
Patent: 5,870,265 →
Application: 08/925,105 →
Soldering Instrument with Heated Tip and Protective Heat Shield Associated Therewith
Patent: 5,864,118 →
Application: 08/926,578 →
Flex on Suspension Design Minimizing Sensitivities to Environmental Stresses
Patent: 5,796,556 →
Application: 08/926,579 →
Slider with Mesa for Optical Disc Data Storage System
Patent: 5,831,797 →
Application: 08/931,431 →
Laser Texturing a Glass or Glass-Ceramic Substrate
Patent: 5,861,196 →
Application: 08/937,461 →
Related Assignments (25)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignors Interest. Mar 1, 1993
From: FORBORD, KENT JON
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 006454/0693 →
Assignment of Assignor's Interest May 12, 1993
From: HAMPSHIRE, RANDALL D.; WOODS, PHILIP R.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 006550/0300 →
Assignment of Assignor's Interest Nov 2, 1993
From: ELSING, JOHN W.; FORBORD, KENT J.; PETERSON, BLAINE T.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 006764/0804 →
Assignment of Assignor's Interest Mar 28, 1994
From: MOWRY, GREGORY S.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 006920/0230 →
Assignment of Assignor's Interest May 23, 1994
From: PHAN, DUC T.; PAJDOWSKI, MARK A.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 007049/0333 →
Assignment of Assignor's Interest Sep 12, 1994
From: ATSATT, SEAN R.; MASIEWICZ, JOHN CHESTER; VIRJEE, PERVEZ E.; LUM, MARVIN MANG-YIN
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 007245/0735 →
Assignment of Assignor's Interest Sep 13, 1994
From: SCHULTZ, ALLAN E.; GEORGE, PETER K.; CALDERON, ARTHUR; RAMDULAR, JUMNA P.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 008019/0052 →
Assignment of Assignor's Interest Nov 22, 1994
From: KUEN, CHI-FOUN; PACEK, RANDALL LEE
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 008042/0192 →
Assignment of Assignor's Interest Dec 19, 1994
From: CHA, ELLIS TAEHO; LEE, JIA-KUEN JERRY
To: CONNER PERIPHERALS, INC.
Reel/Frame 007282/0038 →
Assignment of Assignor's Interest Jan 25, 1995
From: FRENCH, CATHERINE ANNE; REDDY, PRAFULLA BOLLAMPALI; MILLER, JEFFREY ALAN
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 007335/0187 →
Assignment of Assignor's Interest Feb 27, 1995
From: MASIEWICZ, JOHN C.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 007389/0784 →
Assignment of Assignor's Interest Mar 17, 1995
From: SEAGATE TECHNOLOGY, INC.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 007384/0142 →
Assignment of Assignor's Interest Apr 14, 1995
From: KIM, TAESUN E.; LEE, HYUNG J.; SHIH, YAO-TZUNG R.; BRUNO, JOHN C.
To: CONNER PERIPHERALS, INC.
Reel/Frame 008193/0602 →
Assignment of Assignor's Interest May 11, 1995
From: TANG, XIAOXIA; CHEN,GA-LANE
To: CONNER PHERIPHERALS, INC.
Reel/Frame 007487/0059 →
Assignment of Assignor's Interest Jun 2, 1995
From: EASTBURN, LINDSEY; MASS, LEON
To: CONNER PERIPHERALS, INC.
Reel/Frame 007507/0094 →
Assignment of Assignor's Interest Jan 10, 1996
From: FUNCHES, OTIS L.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 007997/0521 →
Assignment of Assignor's Interest Feb 2, 1996
From: FUNCHES, OTIS L.
To: SEAGATE TECHNOLOGY, INC., A DELAWARE CORPORATION
Reel/Frame 007997/0534 →
Change of Name Mar 18, 1997
From: CONNER PERIPHERALS, INC.
To: SEAGATE PERIPHERALS, INC.
Reel/Frame 008568/0400 →
Merger Mar 18, 1997
From: SEAGATE PERIPHERALS,INC.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 008587/0277 →
See Recording at Reel 8568, Frame 0400. Jul 3, 1997
From: CONNER PERIPHERALS, INC.
To: SEAGATE PERIPHERALS, INC.
Reel/Frame 008545/0682 →
Merger & Change of Name Sep 2, 1997
From: CONNER PERIPHERALS, INC.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 008704/0628 →
See Recording at Reel 9144 Frame 0144. Re-Record to Change the Number of Microfilm Pages. Nov 24, 1997
From: SEAGATE PERIPHERALS, INC.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 008978/0273 →
Merger Jan 27, 1998
From: SEAGATE PERIPHERALS, INC.
To: SEAGATE TECHNOLOGY, INC.
Reel/Frame 009144/0144 →
Merger/Change of Name Feb 2, 1998
From: CONNER PERIPHERALS, INC.
To: SEAGATE PERIPHERALS, INC.
Reel/Frame 008978/0305 →
Assignment of Assignor's Interest Aug 1, 2000
From: SEAGATE TECHNOLOGY, INC.
To: SEAGATE TECHNOLOGY LLC
Reel/Frame 011077/0319 →