IP Library › Assignment 035091/0577
Patent Assignment
Reel/Frame 035091/0577

MERGER

Recorded: 2015-02-25 Received: 2015-02-25 Pages: 9
Assignor
Assignee
CONTINENTAL AUTOMOTIVE SYSTEMS, INC.
1 CONTINENTAL DR, AUBURN HILLS, MI, 48326-1581, UNITED STATES
Covered Applications (100)
CYCLONIC PARTICLE SEPARATOR FOR FUEL SYSTEMS
App. No. 11/822,787
→
Laser welded automotive diesel exhaust HC dosing valve
App. No. 11/808,511
→
PLASTIC FLANGE WITH MOLDED-OVER WIRE HARNESS
App. No. 11/707,999
→
Receiver for different frequencies and modulations
App. No. 11/652,367
→
PUMP SPACER/DAMPENING STRUCTURE FOR FUEL DELIVERY SYSTEM
App. No. 11/472,290
→
PUMP VAPOR DEFLECTOR FOR FUEL PUMP MODULE ASSEMBLY
App. No. 11/472,291
→
POWER GENERATION SYSTEM SUITABLE FOR HYBRID ELECTRIC VEHICLES
App. No. 11/472,486
→
PLASTIC FLANGE WITH MOLDED-OVER HARNESS
App. No. 11/363,943
→
TORQUE SENSOR MAGNETOMETER
App. No. 11/352,712
→
LEADFRAME-BASED MODULE DC BUS DESIGN TO REDUCE MODULE INDUCTANCE
App. No. 11/292,870
→
MULTILAYER FUEL MODULE FLANGE
App. No. 11/296,717
→
SENSOR HYSTERESIS REDUCTION
App. No. 11/270,124
→
LEADFRAME-BASED MODULE DC BUS DESIGN TO REDUCE MODULE INDUCTANCE
App. No. 11/245,723
→
REDUCTION OF HYSTERESIS IN A MAGNETOELASTIC TORQUE SENSOR
App. No. 11/232,602
→
Three dimensional dial for vehicle
App. No. 11/221,629
→
DEEP POCKET SEAT ASSEMBLY IN MODULAR FUEL INJECTOR HAVING AXIAL CONTACT TERMINALS AND METHODS
App. No. 11/198,514
→
DEEP POCKET SEAT ASSEMBLY IN MODULAR FUEL INJECTOR WITH FUEL FILTER MOUNTED TO SPRING BIAS ADJUSTING TUBE AND METHODS
App. No. 11/195,151
→
FUEL SENSOR
App. No. 11/168,176
→
CONNECTOR OVERMOLD SPACER
App. No. 11/167,336
→
PUNCHING PROCESS WITH MAGNETOSTRICTIVE POWER SOURCE
App. No. 11/154,966
→
WHEEL-SPEED SENSOR
App. No. 11/137,139
→
ELECTRONIC COMPASS AND METHOD FOR TRACKING VEHICLE ROTATION
App. No. 11/101,281
→
ELECTRONIC COMPASS AND METHOD OF CONTROLLING AN ELECTRONIC COMPASS USING INDEPENDENT CALIBRATION AND COMPASS HEADING MODULES
App. No. 11/101,284
→
ELECTRONIC COMPASS AND METHOD OF CALIBRATION
App. No. 11/101,283
→
FLUID LEVEL SENSOR
App. No. 11/071,820
→
POLYMERIC BODIED FUEL INJECTOR WITH A SEAT AND ELASTOMERIC SEAL MOLDED TO A POLYMERIC SUPPORT MEMBER
App. No. 11/014,692
→
FUEL INJECTOR WITH AN ARMATURE ASSEMBLY HAVING A CONTINUOUS ELONGATED ARMATURE AND A METERING ASSEMBLY HAVING A SEAT AND POLYMERIC SUPPORT MEMBER
App. No. 11/014,698
→
FUEL INJECTOR WITH A METERING ASSEMBLY HAVING AT LEAST ONE ANNULAR RIDGE EXTENSION BETWEEN A VALVE SEAT AND A POLYMERIC VALVE BODY
App. No. 11/014,699
→
FUEL INJECTOR WITH A METERING ASSEMBLY HAVING A POLYMERIC SUPPORT MEMBER WHICH HAS AN EXTERNAL SURFACE SECURED TO A BORE OF A POLYMERIC HOUSING AND A GUIDE MEMBER THAT IS DISPOSED IN THE POLYMERIC SUPPORT MEMBER
App. No. 11/014,696
→
FUEL INJECTOR WITH A METERING ASSEMBLY WITH A POLYMERIC SUPPORT MEMBER AND AN ORIFICE DISK POSITIONED AT A TERMINAL END OF THE POLYMERIC HOUSING
App. No. 11/014,695
→
COUPLING VALVE STRUCTURE FOR FUEL SUPPLY MODULE
App. No. 11/014,650
→
ARCHITECTURE FOR POWER MODULES SUCH AS POWER INVERTERS
App. No. 11/010,561
→
ARCHITECTURE FOR POWER MODULES SUCH AS POWER INVERTERS
App. No. 11/010,950
→
ARCHITECTURE FOR POWER MODULES SUCH AS POWER INVERTERS
App. No. 11/003,542
→
SUBMERSED FUEL PRESSURE REGULATOR ASSEMBLY
App. No. 11/000,650
→
Electronic assembly and method of disassembly
App. No. 10/993,110
→
IN LINE FLUID QUALITY SENSOR
App. No. 10/991,579
→
UNITARY FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,864
→
FUEL INJECTOR WITH SAUTER-MEAN-DIAMETER ATOMIZATION SPRAY OF LESS THAN 70 MICRONS
App. No. 10/972,652
→
FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,584
→
METHODS OF MAKING FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,583
→
FLUIDIC FLOW CONTROLLER ORIFICE DISC WITH DUAL-FLOW DIVIDER FOR FUEL INJECTOR
App. No. 10/972,585
→
ASYMMETRIC FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,651
→
INTEGRATION OF PLANAR TRANSFORMER AND/OR PLANAR INDUCTOR WITH POWER SWITCHES IN POWER CONVERTER
App. No. 10/964,000
→
ILLUMINATED POINTER ENABLING INDEPENDENT POINTING ON TWO SCALES SIMULTANEOUSLY
App. No. 10/951,090
→
POWER CONVERTER
App. No. 10/945,850
→
SPRAY PATTERN CONTROL WITH ANGULAR ORIENTATION IN FUEL INJECTOR AND METHOD
App. No. 10/935,589
→
ROTOR ASSEMBLY FOR A PERMANENT MAGNET POWER ELECTRIC MACHINE
App. No. 10/927,544
→
FUEL DELIVERY SYSTEM WITH FLOW RE-DIRECTOR FOR IMPROVED RE-PRIMING SEQUENCE
App. No. 10/926,430
→
ENCODER FAILURE DETECTION
App. No. 10/903,492
→
METHOD, APPARATUS AND ARTICLE FOR MOTOR CONTROL VOLTAGE DROPOUT DETECTION
App. No. 10/903,918
→
UNITARY FUEL INJECTOR MODULE FOR FUEL SYSTEM
App. No. 10/891,502
→
RESERVOIR OF FUEL DELIVERY MODULE HAVING VALVE PROTECTION STRUCTURE
App. No. 10/888,415
→
RESERVOIR ASSEMBLY HAVING INTERCHANGEABLE FUEL SUCTION UNIT AND FUEL PUMP ASSEMBLY FOR VEHICLES
App. No. 10/886,138
→
SYSTEM AND METHOD FOR UNBALANCED INDEPENDENT AC PHASE VOLTAGE CONTROL OF A 3-PHASE, 4-WIRE OUTPUT DC/AC INVERTER
App. No. 10/872,970
→
MODULAR FUEL INJECTOR WITH DI-POLE MAGNETIC CIRCUIT
App. No. 10/863,250
→
INTERLEAVED POWER CONVERTER
App. No. 10/861,319
→
TIRE SENSOR COMMUNICATION SYSTEM
App. No. 10/853,542
→
APPARATUS AND METHOD OF MAKING A COMPOUND-ANGLED ORIFICE IN A DISC FOR A FUEL INJECTOR
App. No. 10/849,444
→
FUEL INJECTOR INCLUDING AN ORIFICE DISC AND A METHOD OF FORMING AN OBLIQUE SPIRAL FUEL FLOW
App. No. 10/848,078
→
FUEL INJECTOR INCLUDING A COMPOUND ANGLE ORIFICE DISC FOR ADJUSTING SPRAY TARGETING
App. No. 10/835,617
→
ASYMMETRICAL PUNCH
App. No. 10/833,348
→
REGULATOR WITH FLOW DISTRIBUTOR
App. No. 10/810,678
→
METHOD OF USING A TOOL TO FORM ANGLED ORIFICES IN A METERING ORIFICE DISC
App. No. 10/807,340
→
PUNCH TOOL FOR ANGLED ORIFICE
App. No. 10/807,339
→
METHOD FOR DETERMINING RMS VALUES FOR GRID-LINKED CONVERTERS
App. No. 10/797,905
→
COMPOUND-ANGLED ORIFICES IN FUEL INJECTION METERING DISC
App. No. 10/793,117
→
NON-CONTACT THRUST FORCE SENSOR ASSEMBLY
App. No. 10/790,963
→
STEEL FUEL FLANGE WITH PLASTIC STRUT MOUNTS
App. No. 10/783,134
→
INDUCTIVE LOAD POWERING ARRANGEMENT
App. No. 10/779,055
→
ILLUMINATION OF GAUGE INDICATOR SCALE
App. No. 10/760,755
→
PRINTED CIRCUIT BOARD STIFFENER
App. No. 10/757,922
→
SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES FORMED ON A DIMPLED FUEL INJECTION METERING DISC HAVING A SAC VOLUME REDUCER
App. No. 10/753,377
→
SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES FORMED ON A GENERALLY PLANAR METERING DISC AND REORIENTED ON SUBSEQUENTLY DIMPLED FUEL INJECTION METERING DISC
App. No. 10/753,481
→
SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES FORMED ON DIMPLED FUEL INJECTION METERING DISC HAVING A SAC VOLUME REDUCER
App. No. 10/753,378
→
FUEL SUPPLY AND DIAGNOSTICS MODULE
App. No. 10/725,866
→
TRANSMITTER HAVING SUPPLEMENTAL POWER SOURCE
App. No. 10/716,311
→
POWER CONVERTER EMPLOYING A PLANAR TRANSFORMER
App. No. 10/688,834
→
VEHICLE INFORMATION SYSTEM
App. No. 10/656,381
→
APPARATUS AND METHOD FOR SETTING INJECTOR LIFT
App. No. 10/645,589
→
MODULAR FUEL INJECTOR WITH A DEEP POCKET SEAT AND METHOD OF MAINTAINING SPATIAL ORIENTATION
App. No. 10/642,628
→
FUEL INJECTOR WITH A DEEP POCKET SEAT AND METHOD OF MAINTAINING SPATIAL ORIENTATION
App. No. 10/642,629
→
DUAL POWER MODULE POWER SYSTEM ARCHITECTURE
App. No. 10/642,424
→
RIDE THROUGH IN ELECTRONIC POWER CONVERTERS
App. No. 10/637,754
→
FUEL INJECTOR INCLUDING A BENT INLET TUBE
App. No. 10/633,627
→
DRIVE CIRCUIT, DEVICE, AND METHOD FOR SUPPRESSING NOISE, AND USE
App. No. 10/630,108
→
FUEL INJECTOR INCLUDING A COMPOUND ANGLE ORIFICE DISC
App. No. 10/618,713
→
CRASH DETECTION SYSTEM INCLUDING ROLL-OVER DISCRIMINATION
App. No. 10/614,914
→
AUTOMOTIVE CONTROL MODULE HOUSING
App. No. 10/610,610
→
FUEL INJECTOR INCLUDING AN ORIFICE DISC, AND A METHOD OF FORMING THE ORIFICE DISC WITH AN ASYMMETRICAL PUNCH
App. No. 10/608,389
→
FLOW-THROUGH PRESSURE REGULATOR INCLUDING A CLOSURE MEMBER ASSEMBLY INTEGRATED WITH A HOUSING
App. No. 10/455,630
→
FLOW-THROUGH PRESSURE REGULATOR INCLUDING A PERFORATED DIAPHRAGM-TO-SEAT SPRING RETAINER
App. No. 10/455,722
→
PRESSURE REGULATOR INCLUDING A PRESS-FIT SPRING RETAINER
App. No. 10/455,402
→
FUEL SENSOR
App. No. 10/452,840
→
LIFTGATE ANTI-PINCH DETECTOR UTILIZING BACK-UP SENSORS
App. No. 10/449,444
→
METHOD AND APPARATUS FOR MOTOR CONTROL
App. No. 10/449,824
→
CIRCUIT LAYOUT AND PROCEDURE TO CONTROL AT LEAST ONE ELECTRICAL COMPONENT OF A MOTOR VEHICLE
App. No. 10/446,321
→
MULTIPLE-SATELLITE SENSOR ALGORITHM WAKE UP AND RESET STRATEGY FOR AN INFLATABLE RESTRAINT SYSTEM
App. No. 10/443,211
→
THROUGH THE HOLE ROTARY POSITION SENSOR WITH A PAIR PIECES DISPOSED AROUND THE PERIPHERY OF THE CIRCULAR MAGNET
App. No. 10/438,670
→
Diagnostic circuit for vehicle device control module
App. No. 10/413,781
→