IP Library › Assignment 048855/0626
Patent Assignment
Reel/Frame 048855/0626

ASSIGNMENT OF ASSIGNOR'S INTEREST

Recorded: 2019-04-11 Received: 2019-04-11 Pages: 346
Assignor
EATON CORPORATION
Executed: 2017-12-31
Assignee
EATON INTELLIGENT POWER LIMITED
30 PEMBROKE ROAD, DUBLIN 4, IEX, IRELAND
Covered Applications (100)
NON CONDUCTIVE RUBBER HOSE
App. No. 15/892,985
→
ELECTROHYDRAULIC PROPORTIONAL PRESSURE CONTROL FOR OPEN CIRCUIT PUMP
App. No. 15/751,374
→
SWITCHING ROCKER ARM HAVING CANTILEVERED ROLLERS
App. No. 15/889,144
→
BREAKER MEASUREMENT STRUCTURE FOR POWER DISTRIBUTION UNIT
App. No. 15/884,930
→
POWER DISTRUBUTION UNIT WITH INTERIOR BUSBARS
App. No. 15/884,832
→
GROUND FAULT MODULES AND RELATED CIRCUIT INTERRUPTERS AND METHODS
App. No. 15/883,676
→
LOAD CENTERS WITH NEUTRAL BUS BARS FOR BREAKER PLUG-ON NEUTRAL CONNECTIONS
App. No. 15/883,685
→
ELECTRONIC OVERLOAD BREAKER WITH BUILT-IN SHUNT CALIBRATION (BISC) AND METHODS OF OPERATING SAME
App. No. 15/883,408
→
Electrically Conductive, High Strength, High Temperature Polymer Composite for Additive Manufacturing
App. No. 15/883,800
→
GRILL FOR FACILITATING AIR FLOW
App. No. 15/880,839
→
Apparatus, Methods and Computer Program Products for Inverter Short Circuit Detection
App. No. 15/881,004
→
ADDITIVE MANUFACTURING OF ELASTOMERIC SEALS FOR REPAIR
App. No. 15/878,683
→
VALVETRAIN WITH ROCKER ARM HOUSING MAGNETIC LATCH
App. No. 15/877,145
→
Rotary Motion Switching Apparatus Usable With Circuit Interrupter
App. No. 15/875,177
→
DIFFERENTIAL CASE
App. No. 29/634,237
→
VOLTAGE SENSOR HOUSING AND ASSEMBLY INCLUDING THE SAME
App. No. 15/875,217
→
DIELECTRIC HEAT PATH DEVICES, AND SYSTEMS AND METHODS USING THE SAME
App. No. 15/874,032
→
SWIVEL ASSEMBLY WITH A BOLT AND A HOUSING
App. No. 15/873,201
→
BUCKET ASSEMBLIES WITH ELECTRICALLY GROUNDED FRONT PANELS FOR MOTOR CONTROL CENTERS AND RELATED MOTOR CONTROL CENTERS
App. No. 15/871,509
→
ENCLOSURE, AND WINDOW ASSEMBLY AND ASSEMBLING METHOD THEREFOR
App. No. 15/868,175
→
UPS SYSTEMS AND METHODS USING COORDINATED STATIC SWITCH AND INVERTER OPERATION FOR GENERATOR WALK-IN
App. No. 15/866,857
→
PLENUM TRANSPORT RETAINER CLIP WITH LOCKING FINGER
App. No. 29/632,450
→
Sliding Contact For Electrically Actuated Rocker Arm
App. No. 15/863,901
→
FLUID SYSTEM WITH FILTER DIFFERENTIAL PRESSURE CONTROL
App. No. 15/863,171
→
SWITCH HANDLE FOR CIRCUIT BREAKERS
App. No. 29/631,200
→
SWITCHING ROCKER ARM FOR INTERNAL EXHAUST GAS RECIRCULATION WITH SIMPLE LATCH CONTROL
App. No. 15/856,489
→
ENGINE VALVE LIFTER HAVING ANTI-ROTATION PLUG
App. No. 29/631,218
→
TEST APPARATUS AND METHODS FOR ARC MITIGATION DEVICE
App. No. 15/855,154
→
SYSTEM AND METHOD FOR COMPACT MOTOR CONTROL WITH REDUNDANT POWER STRUCTURES
App. No. 15/854,129
→
MOTOR CONTROL SYSTEM WITH INTEGRATED SOLID-STATE CONTACTOR AND RELAYS AND METHOD OF OPERATION THEREOF
App. No. 15/854,118
→
BOARD-LEVEL MOTOR CONTROL SYSTEM WITH INTEGRATED PROTECTION AND CONTROL COMPONENTS
App. No. 15/854,096
→
FUSIBLE SAFETY DISCONNECT IN SOLID STATE CIRCUIT BREAKERS AND COMBINATION MOTOR STARTERS
App. No. 15/849,716
→
ARC FAULT DETECTION SYSTEM
App. No. 15/850,224
→
BUCKET ASSEMBLIES FOR MOTOR CONTROL CENTERS (MCC) WITH DISCONNECT ASSEMBLIES AND RELATED MCC CABINETS AND METHODS
App. No. 15/848,111
→
MOTOR CONTROL CENTER (MCC) UNITS WITH RETRACTABLE POWER CONNECTOR AND INTERLOCKS INCLUDING A POWER CONNECTOR POSITION INTERLOCK
App. No. 15/848,103
→
HYDRODYNAMIC SEALING COMPONENT AND ASSEMBLY
App. No. 15/849,025
→
CONNECTORS FOR FIBER OPTIC CABLES
App. No. 15/846,595
→
FUEL TANK SAFETY VALVE
App. No. 15/846,412
→
POSITION SENSOR BODY ASSEMBLY
App. No. 15/845,584
→
FLUID FITTING
App. No. 15/737,005
→
CIRCUIT BREAKERS WITH HANDLE BEARING PINS
App. No. 15/843,130
→
BUS PLUG INCLUDING REMOTELY OPERATED CIRCUIT BREAKER AND ELECTRICAL SYSTEM INCLUDING THE SAME
App. No. 15/843,561
→
PLUG-ON NEUTRAL CIRCUIT BREAKERS WITH LOCKOUTS AND RELATED LOADCENTERS AND METHODS
App. No. 15/840,029
→
CIRCUIT BREAKERS WITH PLUG-ON NEUTRAL CONNECTION TO LOAD CENTER NEUTRAL BAR AND RELATED LOAD CENTERS AND METHODS
App. No. 15/840,360
→
SUPERCHARGER HAVING ROTOR WITH PRESS-FIT STUB SHAFTS
App. No. 15/837,198
→
ACTING FORCE TRANSMISSION DEVICE FOR USE WITH VALVE MECHANISM AND METHOD OF MANUFACTURING THE SAME
App. No. 15/837,372
→
BEARING PLATE FOR SUPERCHARGER
App. No. 15/837,047
→
SUPERCHARGER HAVING CONSTANT LEAD HELIX ANGLE TIMING GEARS
App. No. 15/836,991
→
SUPERCHARGER INTEGRAL RESONATOR
App. No. 15/735,527
→
VALVE ACTUATING DEVICE AND METHOD OF MAKING SAME
App. No. 15/835,718
→
ZONE SELECTIVE INTERLOCKING TEST APPARATUS
App. No. 15/831,656
→
ROCKER ASSEMBLY HAVING IMPROVED DURABILITY
App. No. 15/830,559
→
HYDRAULIC CYLINDER
App. No. 15/830,690
→
CIRCUIT INTERRUPTER PROVIDING GROUNDED NEUTRAL PROTECTION AND METHOD OF CONTROLLING THE SAME
App. No. 15/827,261
→
PILOT SIGNAL GENERATING AND ISOLATION CIRCUIT AND ELECTRIC VEHICLE SUPPLY EQUIPMENT INCLUDING THE SAME
App. No. 15/827,146
→
LOW PERMEATION FUEL HOSE
App. No. 15/826,428
→
Switchgear Unit with Isolated Input Fuse Holder Assembly
App. No. 15/824,169
→
ELECTRICAL SWITCHING APPARATUS AND HARNESS ASSEMBLY THEREFOR
App. No. 15/822,647
→
ELECTRICAL SWITCHING APPARATUS AND GUIDE MEMBER THEREFOR
App. No. 15/822,991
→
ENGINE VALVE LIFTER OIL FLOW CONTROL AND ANTI-ROTATION FEATURE
App. No. 15/821,159
→
RADIAL PISTON DEVICE WITH REDUCED PRESSURE DROP
App. No. 15/576,112
→
INSERT TYPE ROTOR FOR RADIAL PISTON DEVICE
App. No. 15/576,078
→
MODULAR AND SERVICEABLE ELECTROMAGNETIC CLUTCH ASSEMBLY
App. No. 15/575,643
→
ELECTRONIC LIMITED SLIP DIFFERENTIAL
App. No. 15/817,803
→
METER PROBE APPARATUS
App. No. 15/817,900
→
COMPOSITE ARC SHIELDS FOR VACUUM INTERRUPTERS AND METHODS FOR FORMING SAME
App. No. 15/817,950
→
LATCH ORIENTATION MECHANISM
App. No. 15/574,198
→
FLEXIBLE GRIP FOR A GOLF CLUB AND METHOD OF MAKING SAME
App. No. 15/813,394
→
METHOD AND APPARATUS FOR AUTHENTICATING AND DETECTING CIRCUIT BREAKER INTEGRITY
App. No. 15/809,535
→
CHARGING RAM ASSEMBLY, AND PIN ASSEMBLY AND SECURING METHOD THEREFOR
App. No. 15/808,985
→
METHOD TO AUTOMATICALLY DETECT THE AREA RATIO OF AN ACTUATOR
App. No. 15/808,311
→
METHOD TO AUTOMATICALLY DETECT PARAMETER FOR PRESSURE DYNAMICS CONTROL
App. No. 15/808,212
→
FULLY INTEGRATED MANUAL OPENING MECHANISM ON MEDIUM VOLTAGE CIRCUIT BREAKER
App. No. 15/807,611
→
CONTROL STRATEGY FOR HYDRAULIC ACTUATOR WITH A PAIR OF INDEPENDENT METERING VALVES
App. No. 15/808,373
→
ELECTRICAL SWITCHING APPARATUS, AND CROSSBAR ASSEMBLY AND SPRING CAP THEREFOR
App. No. 15/807,014
→
Hose with Rubber and Plastic
App. No. 15/806,129
→
FLUID SYSTEM HAVING A CONTROL VALVE AND A MONITORING SYSTEM THEREFOR
App. No. 15/802,972
→
MOTOR CONTROL SYSTEM, CONTROLLER, AND METHOD
App. No. 15/798,975
→
Magnetic Linear Actuator
App. No. 15/798,512
→
VALVE TRAIN ASSEMBLY
App. No. 15/799,188
→
OIL CONTROLLED VALVE
App. No. 15/570,811
→
VALVETRAIN ASSEMBLY WITH DEACTIVATION
App. No. 15/799,057
→
CURRENT SENSING ASSEMBLY EMPLOYING MAGNETIC SENSORS
App. No. 15/797,122
→
ELECTRICAL SWITCHING APPARATUS WITH SPRINGS AND SHUNT TRIP MECHANISM
App. No. 15/797,303
→
GRAPHICAL USER INTERFACE FOR A DISPLAY SCREEN
App. No. 29/624,107
→
SWITCHING ROCKER ARM ASSEMBLY HAVING ECCENTRIC AXLE FOR LASH ADJUSTMENT
App. No. 15/794,570
→
DEVELOPMENT OF A SWITCHING ROLLER FINGER FOLLOWER FOR CYLINDER DEACTIVATION IN INTERNAL COMBUSTION ENGINES
App. No. 15/792,469
→
DEVELOPMENT OF A SWITCHING ROLLER FINGER FOLLOWER FOR CYLINDER DEACTIVATION IN INTERNAL COMBUSTION ENGINES
App. No. 15/792,401
→
FLUID COUPLINGS, SYSTEMS, AND METHODS
App. No. 15/790,629
→
DEVELOPMENT OF A SWITCHING ROLLER FINGER FOLLOWER FOR CYLINDER DEACTIVATION IN INTERNAL COMBUSTION ENGINES
App. No. 15/790,956
→
FUEL ECONOMY ENHANCED TRANSMISSION MANUAL/HOLD MODE AND LOW MODE
App. No. 15/790,443
→
METHOD TO REDUCE ELECTROMAGNETIC INTERFERENCE IN SWITCHING CIRCUIT APPLICATIONS
App. No. 15/567,584
→
MOTOR CONTROL CENTER UNITS WITH MULTI-PURPOSE SHUTTER CAMS AND RELATED UNITS
App. No. 15/786,248
→
ROCKER ARM SPRING RETAINER
App. No. 15/567,271
→
ELECTRONIC VENTING IN A SADDLE FUEL TANK
App. No. 15/782,302
→
GAS-INSULATED SWITCHGEAR WITH SEALED OPERATING MECHANISMS
App. No. 15/728,766
→
UPS Systems and Methods Using Dual Mode Rectifier/Inverter
App. No. 15/728,656
→
ELECTRO-OPTIC LIQUID SENSOR WITH THE USE OF REFLECTED RESIDUAL LIGHT TO ENABLE A TEST OF THE SENSOR
App. No. 15/726,728
→
THERMALLY CONDUCTIVE RING ASSEMBLIES SUITABLE FOR LOAD CENTERS
App. No. 15/724,355
→
SWITCHING SYSTEM, AND ELECTRICAL SWITCHING APPARATUS AND SWITCHING ASSEMBLY THEREFOR
App. No. 15/724,748
→