IP Library › Assignment 058108/0412
Patent Assignment
Reel/Frame 058108/0412

ASSIGNMENT OF ASSIGNOR'S INTEREST

Recorded: 2021-11-12 Received: 2021-11-12 Pages: 11
Assignor
Assignee
VITESCO TECHNOLOGIES USA, LLC
2400 EXECUTIVE HILLS BLVD., AUBURN HILLS, MI, 48326, UNITED STATES
Covered Applications (100)
INJECTOR SEAT THAT INCLUDES A COINED SEAL BAND WITH RADIUS
App. No. 12/843,903
→
INJECTOR SEAT THAT INCLUDES A COINED SEAL BAND AND METHOD
App. No. 12/843,902
→
INJECTOR SEAT THAT INCLUDES A COINED SEAL BAND WITH RADIUS
App. No. 12/219,881
→
DIESEL DOSING SYSTEM RELIEF OF TRAPPED VOLUME FLUID PRESSURE AT SHUTDOWN
App. No. 12/081,537
→
BEARING MOUNTED SENSOR ASSEMBLY
App. No. 12/035,660
→
FRICTION SPRING FOR LEAK DETECTION POPPET
App. No. 12/007,306
→
DC/DC CONVERTER
App. No. 11/970,721
→
OPERATING AND CONTROLLING INSULATED GATE BIPOLAR TRANSISTORS IN HIGH SPEED FAILURE MODE SITUATIONS
App. No. 11/947,272
→
IDLE AIR CONTROL VALVE BEARING IMPROVEMENT
App. No. 11/984,920
→
POLYMERIC BODIED FUEL INJECTOR WITH A SEAT AND ELASTOMERIC SEAL MOLDED TO A POLYMERIC SUPPORT MEMBER
App. No. 11/895,476
→
Laser welded automotive diesel exhaust HC dosing valve
App. No. 11/808,511
→
FUEL INJECTION CIRCUIT WITH SELECTABLE PEAK INJECTION CURRENTS
App. No. 11/755,820
→
Automotive diesel exhaust water cooled HC dosing
App. No. 11/802,209
→
INDUCTIVE HEATED INJECTOR USING VOLTAGE TRANSFORMER TECHNOLOGY
App. No. 11/689,036
→
INDUCTIVE HEATED INJECTOR USING A THREE WIRE CONNECTION
App. No. 11/689,088
→
CONSTANT CURRENT ZERO-VOLTAGE SWITCHING INDUCTION HEATER DRIVER FOR VARIABLE SPRAY INJECTION
App. No. 11/708,993
→
HIGH SPEED GASOLINE UNIT FUEL INJECTOR
App. No. 11/652,754
→
FLUID QUALITY SENSOR
App. No. 11/500,164
→
POWER GENERATION SYSTEM SUITABLE FOR HYBRID ELECTRIC VEHICLES
App. No. 11/472,486
→
BLOWOUT RESISTANT WELD METHOD FOR LASER WELDS FOR PRESS-FIT PARTS
App. No. 11/453,628
→
COMPONENT GEOMETRY AND METHOD FOR BLOWOUT RESISTANT WELDS
App. No. 11/453,543
→
POSITION ADJUSTABLE PRINTED CIRCUIT BOARD
App. No. 11/414,429
→
TORQUE SENSOR MAGNETOMETER
App. No. 11/352,712
→
DEMAGNETIZATION-FIELD ENHANCING MAGNETOMETER
App. No. 11/352,749
→
APPARATUS, SYSTEM, AND METHOD FOR AC BUS LOSS DETECTION AND AC BUS DISCONNECTION FOR ELECTRIC VEHICLES HAVING A HOUSE KEEPING POWER SUPPLY
App. No. 11/317,658
→
PRESSURE REGULATOR WITH CERAMIC VALVE ELEMENT
App. No. 11/291,623
→
MAGENTOMETER CIRCUIT
App. No. 11/284,249
→
SYSTEM AND METHOD OF COMMONLY CONTROLLING POWER CONVERTERS
App. No. 11/282,301
→
SENSOR HYSTERESIS REDUCTION
App. No. 11/270,124
→
DIGITAL FLUXGATE MAGNETOMETER
App. No. 11/269,081
→
SYSTEM AND METHOD OF OVER VOLTAGE CONTROL FOR A POWER SYSTEM
App. No. 11/262,519
→
FUEL PRESSURE REGULATOR VALVE ASSEMBLY
App. No. 11/256,312
→
DEEP POCKET SEAT ASSEMBLY IN MODULAR FUEL INJECTOR WITH FUEL FILTER MOUNTED TO SPRING BIAS ADJUSTING TUBE AND METHODS
App. No. 11/195,151
→
DEEP POCKET SEAT ASSEMBLY IN MODULAR FUEL INJECTOR WITH UNITARY FILTER AND O-RING RETAINER ASSEMBLY AND METHODS
App. No. 11/195,057
→
FUEL SENSOR
App. No. 11/168,176
→
FUEL INJECTOR WITH A METERING ASSEMBLY WITH A POLYMERIC SUPPORT MEMBER AND AN ORIFICE DISK POSITIONED AT A TERMINAL END OF THE POLYMERIC HOUSING
App. No. 11/014,695
→
IN LINE FLUID QUALITY SENSOR
App. No. 10/991,579
→
AUTOMOTIVE CONTROL MODULE HOUSING
App. No. 10/990,643
→
UNITARY FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,864
→
FUEL INJECTOR WITH SAUTER-MEAN-DIAMETER ATOMIZATION SPRAY OF LESS THAN 70 MICRONS
App. No. 10/972,652
→
FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,584
→
METHODS OF MAKING FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,583
→
FLUIDIC FLOW CONTROLLER ORIFICE DISC WITH DUAL-FLOW DIVIDER FOR FUEL INJECTOR
App. No. 10/972,585
→
ASYMMETRIC FLUIDIC FLOW CONTROLLER ORIFICE DISC FOR FUEL INJECTOR
App. No. 10/972,651
→
INTEGRATION OF PLANAR TRANSFORMER AND/OR PLANAR INDUCTOR WITH POWER SWITCHES IN POWER CONVERTER
App. No. 10/964,000
→
SPRAY PATTERN CONTROL WITH ANGULAR ORIENTATION IN FUEL INJECTOR AND METHOD
App. No. 10/935,589
→
METHOD, APPARATUS AND ARTICLE FOR MOTOR CONTROL VOLTAGE DROPOUT DETECTION
App. No. 10/903,918
→
UNITARY FUEL INJECTOR MODULE FOR FUEL SYSTEM
App. No. 10/891,502
→
MODULAR FUEL INJECTOR WITH DI-POLE MAGNETIC CIRCUIT
App. No. 10/863,250
→
INTERLEAVED POWER CONVERTER
App. No. 10/861,319
→
FUEL INJECTOR INCLUDING AN ORIFICE DISC AND A METHOD OF FORMING AN OBLIQUE SPIRAL FUEL FLOW
App. No. 10/848,078
→
MAGNETIC CIRCUIT USING NEGATIVE MAGNETIC SUSCEPTIBILITY
App. No. 10/848,000
→
FUEL INJECTOR INCLUDING A COMPOUND ANGLE ORIFICE DISC FOR ADJUSTING SPRAY TARGETING
App. No. 10/835,617
→
ASYMMETRICAL PUNCH
App. No. 10/833,348
→
REGULATOR WITH FLOW DISTRIBUTOR
App. No. 10/810,678
→
METHOD OF USING A TOOL TO FORM ANGLED ORIFICES IN A METERING ORIFICE DISC
App. No. 10/807,340
→
METHOD FOR DETERMINING RMS VALUES FOR GRID-LINKED CONVERTERS
App. No. 10/797,905
→
COMPOUND-ANGLED ORIFICES IN FUEL INJECTION METERING DISC
App. No. 10/793,117
→
NON-CONTACT THRUST FORCE SENSOR ASSEMBLY
App. No. 10/790,963
→
INDUCTIVE LOAD POWERING ARRANGEMENT
App. No. 10/779,055
→
SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES FORMED ON A DIMPLED FUEL INJECTION METERING DISC HAVING A SAC VOLUME REDUCER
App. No. 10/753,377
→
SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES FORMED ON A GENERALLY PLANAR METERING DISC AND REORIENTED ON SUBSEQUENTLY DIMPLED FUEL INJECTION METERING DISC
App. No. 10/753,481
→
SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES FORMED ON DIMPLED FUEL INJECTION METERING DISC HAVING A SAC VOLUME REDUCER
App. No. 10/753,378
→
FUEL SUPPLY AND DIAGNOSTICS MODULE
App. No. 10/725,866
→
MODULAR FUEL INJECTOR HAVING A SURFACE TREATMENT ON AN IMPACT SURFACE OF AN ELECTROMAGNETIC ACTUATOR AND HAVING AN INTEGRAL FILTER AND DYNAMIC ADJUSTMENT ASSEMBLY
App. No. 10/645,777
→
MAGNETO-HYDRAULIC COMPENSATOR FOR A FUEL INJECTOR
App. No. 10/645,781
→
MODULAR FUEL INJECTOR AND METHOD OF ASSEMBLING THE MODULAR FUEL INJECTOR
App. No. 10/644,012
→
MODULAR FUEL INJECTOR WITH A DEEP POCKET SEAT AND METHOD OF MAINTAINING SPATIAL ORIENTATION
App. No. 10/642,628
→
FUEL INJECTOR WITH A DEEP POCKET SEAT AND METHOD OF MAINTAINING SPATIAL ORIENTATION
App. No. 10/642,629
→
RIDE THROUGH IN ELECTRONIC POWER CONVERTERS
App. No. 10/637,754
→
FUEL INJECTOR INCLUDING A COMPOUND ANGLE ORIFICE DISC
App. No. 10/618,713
→
AUTOMOTIVE CONTROL MODULE HOUSING
App. No. 10/610,610
→
FUEL INJECTOR INCLUDING AN ORIFICE DISC, AND A METHOD OF FORMING THE ORIFICE DISC WITH AN ASYMMETRICAL PUNCH
App. No. 10/608,389
→
FLOW-THROUGH PRESSURE REGULATOR INCLUDING A CLOSURE MEMBER ASSEMBLY INTEGRATED WITH A HOUSING
App. No. 10/455,630
→
FUEL SENSOR
App. No. 10/452,840
→
METHOD AND APPARATUS FOR MOTOR CONTROL
App. No. 10/449,824
→
MODULAR FUEL INJECTOR HAVING A LOW MASS, HIGH EFFICIENCY ELECTROMAGNETIC ACTUATOR AND HAVING AN INTEGRAL FILTER AND O-RING RETAINER ASSEMBLY
App. No. 10/411,291
→
SELF-LOCKING SPRING STOP FOR FUEL INJECTOR CALIBRATION
App. No. 10/404,673
→
INJECTOR VALVE FOR INTEGRATED AIR/FUEL MODULE
App. No. 10/402,969
→
SELF-LOCKING SPRING STOP FOR FUEL INJECTOR CALIBRATION
App. No. 10/372,900
→
INTEGRATED TRACTION INVERTER MODULE AND DC/DC CONVERTER
App. No. 10/360,832
→
CIRCUIT CONFIGURATION FOR PERMANENT MAGNET SYNCHRONOUS MOTOR CONTROL
App. No. 10/346,724
→
DEVICE AND METHOD OF COMMUTATION CONTROL FOR AN ISOLATED BOOST CONVERTER
App. No. 10/345,894
→
OVERMODULATION SYSTEMS AND METHODS FOR INDUCTION MOTOR CONTROL
App. No. 10/345,872
→
METHOD AND SYSTEM FOR NON-INVASIVE POWER TRANSISTOR DIE VOLTAGE MEASUREMENT
App. No. 10/309,793
→
FUEL INJECTOR CUP WITH IMPROVED LEAD-IN DIMENSIONS FOR REDUCED INSERTION FORCE
App. No. 10/253,476
→
GENERALLY CIRCULAR SPRAY PATTERN CONTROL WITH NON-ANGLED ORIFICES IN FUEL INJECTION METERING DISC AND METHOD
App. No. 10/253,499
→
SPRAY TARGETING TO AN ARCUATE SECTOR WITH NON-ANGLED ORIFICES IN FUEL INJECTION METERING DISC AND METHOD
App. No. 10/253,467
→
SPRAY PATTERN CONTROL WITH ANGULAR ORIENTATION IN FUEL INJECTOR AND METHOD
App. No. 10/253,468
→
INJECTION VALVE WITH SINGLE DISC TURBULENCE GENERATION
App. No. 10/247,351
→
FUEL INJECTOR AND METHOD OF FORMING A HERMETIC SEAL FOR THE FUEL INJECTOR
App. No. 10/246,483
→
SPRAY CONTROL WITH NON-ANGLED ORIFICES IN FUEL INJECTION METERING DISC AND METHODS
App. No. 10/183,392
→
UTILIZING INCREASING WIDTH FOR IDENTIFICATION VOLTAGES
App. No. 10/184,471
→
APPARATUS AND METHOD OF CONNECTING A FUEL INJECTOR AND A FUEL RAIL
App. No. 10/112,768
→
SYSTEM AND METHOD FOR INDUCTION MOTOR CONTROL
App. No. 09/683,180
→
SYSTEM AND METHOD FOR CONTROLLING TORQUE IN AN ELECTRICAL MACHINE
App. No. 09/683,176
→
SERIES REGENERATIVE BRAKING TORQUE CONTROL SYSTEMS AND METHODS
App. No. 09/683,171
→
SYSTEM AND METHOD FOR INDUCTION MOTOR CONTROL
App. No. 10/010,307
→
TRANSMISSION SHIFT POSITION SENSOR
App. No. 09/957,840
→
ELECTRONIC CIRCUIT FOR AUTOMATIC DC OFFSET COMPENSATION FOR A LINEAR DISPLACEMENT SENSOR
App. No. 09/853,771
→