IP Library › Assignment 019991/0643
Patent Assignment
Reel/Frame 019991/0643

MERGER

Recorded: 2007-10-21 Received: 2007-10-21 Pages: 15
Assignor
Assignee
COMMSCOPE, INC. OF NORTH CAROLINA
1100 COMMSCOPE PLACE, SE, HICKORY, NC, 28602, UNITED STATES
Covered Applications (49)
NEXT HIGH FREQUENCY IMPROVEMENT USING HYBRID SUBSTRATES OF TWO MATERIALS WITH DIFFERENT DIELECTRIC CONSTANT FREQUENCY SLOPES
App. No. 11/734,263
→
NEXT HIGH FREQUENCY IMPROVEMENT BY USING FREQUENCY DEPENDENT EFFECTIVE CAPACITANCE
App. No. 11/657,024
→
ALIEN NEXT COMPENSATION FOR ADJACENTLY PLACED CONNECTORS
App. No. 11/621,330
→
COMMUNICATIONS CONNECTORS WITH FLOATING WIRING BOARD FOR IMPARTING CROSSTALK COMPENSATION BETWEEN CONDUCTORS
App. No. 11/610,125
→
DOOR FOR COMMUNICATIONS CABINET OR RACK
App. No. 29/265,224
→
COMMUNICATIONS PLUG
App. No. 29/265,235
→
TONEABLE CONDUIT AND METHOD OF PREPARING SAME
App. No. 11/438,654
→
CARRIER FOR MULTIPLE SPLICE TRAYS
App. No. 11/367,631
→
CONTROLLED MODE CONVERSION CONNECTOR FOR REDUCED ALIEN CROSSTALK
App. No. 11/340,368
→
COMMUNICATIONS CONNECTOR WITH LEADFRAME CONTACT WIRES THAT COMPENSATE DIFFERENTIAL TO COMMON MODE CROSSTALK
App. No. 11/266,619
→
Finned jackets for LAN cables
App. No. 11/250,543
→
COMMUNICATIONS CONNECTOR FOR IMPARTING ENHANCED CROSSTALK COMPENSATION BETWEEN CONDUCTORS
App. No. 11/230,442
→
COMMUNICATIONS CONNECTOR FOR IMPARTING CROSSTALK COMPENSATION BETWEEN CONDUCTORS
App. No. 11/208,980
→
COMMUNICATIONS CONNECTOR WITH FLOATING WIRING BOARD FOR IMPARTING CROSSTALK COMPENSATION BETWEEN CONDUCTORS
App. No. 11/139,768
→
MODULAR PLUG ASSEMBLIES, TERMINATED CABLE ASSEMBLIES AND METHODS FOR FORMING THE SAME
App. No. 11/137,152
→
COMMUNICATIONS JACK WITH COMPENSATION FOR DIFFERENTIAL TO DIFFERENTIAL AND DIFFERENTIAL TO COMMON MODE CROSSTALK
App. No. 11/088,044
→
COMMUNICATION PLUG WITH BALANCED WIRING TO REDUCE DIFFERENTIAL TO COMMON MODE CROSSTALK
App. No. 11/051,305
→
HIGH FREQUENCY ELECTRICAL CONNECTOR
App. No. 10/994,928
→
METHODS AND APPARATUS FOR FORMING CABLE MEDIA
App. No. 10/943,497
→
OPTICAL FIBER ARRAY CONNECTIVITY SYSTEM UTILIZING ANGLE POLISHED FERRULES AND ALIGNED-KEY ADAPTERS AND CABLE FOR SAME
App. No. 10/920,102
→
Modular communications shelf system and methods for using the same
App. No. 10/858,513
→
METALLIZED SLED FOR COMMUNICATION PLUG
App. No. 10/853,292
→
NEXT HIGH FREQUENCY IMPROVEMENT BY USING FREQUENCY DEPENDENT EFFECTIVE CAPACITANCE
App. No. 10/845,104
→
CARRIER FOR MULTIPLE SPLICE TRAYS
App. No. 10/840,681
→
ARTICULATED HIGH DENSITY FIBER OPTIC SPLICE AND TERMINATION SHELF
App. No. 10/832,893
→
ALIEN NEXT COMPENSATION FOR ADJACENTLY PLACED CONNECTORS
App. No. 10/831,325
→
NEXT HIGH FREQUENCY IMPROVEMENT USING HYBRID SUBSTRATES OF TWO MATERIALS WITH DIFFERENT DIELECTRIC CONSTANT FREQUENCY SLOPES
App. No. 10/800,696
→
MAXIMIZING CAPACITANCE PER UNIT AREA WHILE MINIMIZING SIGNAL TRANSMISSION DELAY IN PCB
App. No. 10/798,389
→
HIGH-DENSITY MULTI-PORT-MODULE PATCH PANEL SYSTEM
App. No. 10/791,812
→
CABINET WITH CROSS-CONNECT THAT PROVIDES ACCESS TO REAR SIDE OF ELECTRONIC EQUIPMENT
App. No. 10/788,399
→
LOCAL AREA NETWORK CABLING ARRANGEMENT WITH RANDOMIZED VARIATION
App. No. 10/690,608
→
TELECOMMUNICATIONS PANEL FLAME SHIELD AND WIRE TROUGH
App. No. 10/633,421
→
BACK-END VARIATION CONTROL CAP FOR USE WITH A JACK MODULE
App. No. 10/447,181
→
CABINET UPGRADE SYSTEM FOR IN-SERVICE TELECOMMUNICATIONS CABINETS
App. No. 10/386,007
→
COMMUNICATION JACK THAT WITHSTANDS INSERTION OF A COMMUNICATION PLUG THAT THE JACK IS NOT SPECIFICALLY CONFIGURED TO MATE WITH WITHOUT BEING DAMAGED
App. No. 10/287,141
→
CORRECTING FOR NEAR-END CROSSTALK UNBALANCE CAUSED BY DEPLOYMENT OF CROSSTALK COMPENSATION ON OTHER PAIRS
App. No. 10/278,323
→
COMMUNICATIONS CONNECTOR THAT OPERATES IN MULTIPLE MODES FOR HANDLING MULTIPLE SIGNAL TYPES
App. No. 10/269,211
→
SYSTEMS AND METHODS FOR WEATHERPROOF CABINETS WITH MULTIPLE COMPARTMENT COOLING
App. No. 10/193,050
→
SYSTEMS AND METHODS FOR WEATHERPROOF CABINETS WITH VARIABLY COOLED COMPARTMENTS
App. No. 10/193,556
→
EQUIPMENT ENCLOSURE WITH HEAT EXCHANGER
App. No. 10/170,659
→
DOUBLE SIDED HEAT EXCHANGER CORE
App. No. 10/167,953
→
NETWORK CABLE WITH ELLIPTICAL CROSSWEB FIN STRUCTURE
App. No. 10/127,401
→
TERMINAL HOUSING FOR A COMMUNICATION JACK ASSEMBLY
App. No. 10/076,933
→
POSITIVE CONNECTION SYSTEM FOR HIGH FREQUENCY COMMUNICATION CONNECTORS
App. No. 09/918,176
→
INDUCTIVE CROSSTALK COMPENSATION IN A COMMUNICATION CONNECTOR
App. No. 09/887,147
→
SIMULTANEOUS NEAR-END AND FAR-END CROSSTALK COMPENSATION IN A COMMUNICATION CONNECTOR
App. No. 09/863,625
→
WIRE LEAD GUIDE FOR COMMUNICATION CONNECTORS
App. No. 09/832,271
→
HIGH PERFORMANCE COMMUNICATION CONNECTOR CONSTRUCTION
App. No. 09/815,118
→
Multiple layer hinged enclosure
App. No. 09/768,983
→