IP Library › Assignment 022201/0610
Patent Assignment
Reel/Frame 022201/0610

SECURITY AGREEMENT

Recorded: 2009-02-04 Received: 2009-02-04 Pages: 43
Assignor
Assignee
UNITED STATES DEPARTMENT OF THE TREASURY
1500 PENNSYLVANIA AVENUE, NW, ROOM 2312, WASHINGTON, DC, 20220, UNITED STATES
Covered Applications (100)
UP-SHIFT CONTROL IN AN AUTOMATIC TRANSMISSION WITH NEGATIVE INPUT TORQUE
App. No. 12/335,900
→
GEAR CLASH LOGIC
App. No. 12/332,884
→
GAS CONTROL AND OPERATION METHOD OF A FUEL CELL SYSTEM FOR WATER AND GAS DISTRIBUTION
App. No. 12/327,195
→
REMOTE MANAGEMENT OF VEHICLE MODULES BASED ON GEOGRAPHIC LOCATION
App. No. 12/326,501
→
FRICTION STIR NUT AND METHOD OF JOINING THEREWITH
App. No. 12/265,874
→
METHOD FOR CONTROLLING A TRANSMISSION DURING ACCELERATION FROM IDLE
App. No. 12/257,207
→
INPUT SHAFT WITH INTERNAL DRY SPLINES AND SEALED PLUG AND METHOD OF MANUFACTURING A HYBRID POWERTRAIN UTILIZING THE SAME
App. No. 12/252,707
→
INTEGRATED DAMPER AND STARTER RING GEAR FOR A HYBRID VEHICLE
App. No. 12/238,528
→
Powertrain Having a Damper Installed Directly to Engine Output and Method of Assembling Same
App. No. 12/234,866
→
INPUT SHAFT DRIVEN HYBRID TRANSMISSION PUMP
App. No. 12/234,867
→
STAMPED FUEL CELL BIPOLAR PLATE
App. No. 12/207,541
→
TELEMATICS-ENABLED AGGREGATED VEHICLE DIAGNOSIS AND PROGNOSIS
App. No. 12/205,023
→
FLOW FIELD PLATE ARRANGEMENT FOR A FUEL CELL
App. No. 12/201,443
→
SEALS FOR TRANSMISSION DRIVE MOTORS
App. No. 12/197,813
→
FUEL PROCESSING SYSTEM HAVING GAS RECIRCULATION FOR TRANSIENT OPERATIONS
App. No. 12/187,993
→
SYSTEM AND METHOD FOR CONTROLLING A CLUTCH FILL EVENT
App. No. 12/178,696
→
AIRFLOW CONTROL DEVICES BASED ON ACTIVE MATERIALS
App. No. 12/174,035
→
CARBON MONOXIDE CLEAN-UP IN A PEM FUEL CELL SYSTEM
App. No. 12/171,901
→
SUPERSONIC VAPOR COMPRESSION AND HEAT REJECTION CYCLE
App. No. 12/170,090
→
ELECTRICALLY CONDUCTIVE ELEMENT TREATED FOR USE IN A FUEL CELL
App. No. 12/143,302
→
FLEXIBLE BIPOLAR PLATE
App. No. 12/139,153
→
CONTROL STRATEGY FOR LEAN NOX TRAP REGENERATION
App. No. 12/132,678
→
FLY-BY-WIRE LIMP HOME AND MULTI-PLEX SYSTEM
App. No. 12/114,207
→
HOOD ASSEMBLY UTILIZING ACTIVE MATERIALS BASED MECHANISMS
App. No. 12/109,797
→
METHOD AND SYSTEM FOR CONTROLLING TRANSMISSION TEMPERATURE
App. No. 12/106,547
→
FLOW CONTROL FOR MULTIPLE STACKS
App. No. 12/104,752
→
Plant floor event protocol and schema
App. No. 12/062,572
→
DIFFUSION MEDIA TAILORED TO ACCOUNT FOR VARIATIONS IN OPERATING HUMIDITY AND DEVICES INCORPORATING THE SAME
App. No. 12/056,611
→
Method For Protecting An Exhaust Aftertreatment System
App. No. 12/042,428
→
MULTI-SPEED SPLIT DUAL CLUTCH TRANSMISSION
App. No. 12/028,447
→
MULTI-SPEED SPLIT DUAL CLUTCH TRANSMISSION
App. No. 12/028,438
→
MULTI-SPEED SPLIT DUAL CLUTCH TRANSMISSION
App. No. 12/028,444
→
METHOD FOR DETECTING COMPRESSOR SURGE IN A FUEL CELL SYSTEM USING A MASS FLOW METER
App. No. 12/027,023
→
LOW CONTACT RESISTANCE BONDING METHOD FOR BIPOLAR PLATES IN A PEM FUEL CELL
App. No. 12/023,952
→
FLUID FLOW PULSING FOR INCREASED STABILITY IN PEM FUEL CELL
App. No. 12/021,394
→
Apparatus and Method for Predicting the Health of a Power Transmission
App. No. 12/019,086
→
APPARATUS AND METHOD FOR DETERMINING REMAINING TRANSMISSION OIL LIFE
App. No. 12/018,833
→
APPARATUS AND METHOD FOR DETERMINING THE REMAINING USEFUL LIFE OF A TRANSMISSION FILTER
App. No. 11/971,983
→
METHOD OF ASSEMBLING A STATOR FOR AN ELECTRIC MOTOR
App. No. 11/953,250
→
SECURE OVER-THE-AIR MODIFICATION OF AUTOMOTIVE VEHICULAR OPTIONS
App. No. 11/945,860
→
SOLENOID AND CONNECTOR ASSEMBLY
App. No. 11/940,801
→
FLUID TRANSFER TUBE
App. No. 11/937,943
→
SHEET PROCESSING APPARATUS, METHOD OF USE, AND PLASTICALLY DEFORMED SHEET
App. No. 11/871,292
→
MAGNETORHEOLOGICAL DEVICE AND SYSTEM AND METHOD FOR USING THE SAME
App. No. 11/974,133
→
CONTROL SYSTEM FOR A TRANSMISSION WITH A DUAL AREA APPLY PISTON FOR A TORQUE-TRANSMITTING MECHANISM ENGAGEMENT
App. No. 11/862,380
→
POWERTRAIN WITH TORQUE CONVERTER-MOUNTED GENERATOR FOR MULTIPLE VOLTAGE ELECTRICAL POWER AND METHOD FOR ASSEMBLING SAME
App. No. 11/856,755
→
ELECTRO-HYDRAULIC CONTROL SYSTEM FOR TRANSMISSION WITH DUAL-AREA PISTON FOR TORQUE-TRANSMITTING MECHANISM
App. No. 11/856,751
→
ELECTRO-HYDRAULIC CONTROL SYSTEM WITH MULTIPLEXED SOLENOID FOR RETARDER OPERATION AND MAIN PRESSURE MODULATION
App. No. 11/856,752
→
APPARATUS AND METHOD OF ENGINE TORQUE CONTROL DURING POWER TAKE-OFF OPERATION IN A MOTOR VEHICLE
App. No. 11/852,630
→
METHOD FOR DETERMINING ESTIMATED VEHICLE DYNAMICS PARAMETERS
App. No. 11/838,025
→
METHOD FOR SHUTTING DOWN A FUEL CELL SYSTEM USING AN AIR PURGE
App. No. 11/836,557
→
MULTI-SPEED TRANSMISSION
App. No. 11/832,490
→
CONTROL DEVICE FOR DRIVING A BRUSHLESS DC MOTOR
App. No. 11/829,216
→
STIR-WELDED ROTORS AND METHODS OF MAKING
App. No. 11/829,270
→
COUNTERSHAFT CLUTCH AND GEAR ASSEMBLY
App. No. 11/780,313
→
PINCH BOLT - SPLIT HUB ATTACHMENT ASSEMBLY
App. No. 11/771,321
→
REVERSIBLY DEPLOYABLE ENERGY ABSORBING ASSEMBLY AND METHODS FOR OPERATING THE SAME
App. No. 11/770,886
→
CENTRIFUGE AND VENTING SYSTEM FOR A TRANSMISSION
App. No. 11/770,153
→
CASTING MOLD AND METHOD FOR CASTING ACHIEVING IN-MOLD MODIFICATION OF A CASTING METAL
App. No. 11/818,258
→
METHOD OF MAKING MEMBRANE ELECTRODE ASSEMBLIES
App. No. 11/762,103
→
SEVEN SPEED TRANSMISSION WITH SIX TORQUE-TRANSMITTING MECHANISMS AND THREE PLANETARY GEAR SETS
App. No. 11/758,747
→
VARIABLE CURVATURE TUBE AND DRAW DIE THEREFOR
App. No. 11/807,724
→
NINE OR TEN SPEED SPLIT CLUTCH COUNTERSHAFT AUTOMATIC TRANSMISSION
App. No. 11/751,199
→
METHOD FOR PROVIDING BACK-PRESSURE FOR A FUEL CELL STACK
App. No. 11/750,888
→
FUEL CELL SYSTEM INCLUDING A TWO-POSITION BACK-PRESSURE VALVE
App. No. 11/750,875
→
METHOD AND PROCESS FOR UNITIZED MEA
App. No. 11/750,224
→
FLUID COUPLING ASSEMBLY HAVING A ROTATABLE COUPLING
App. No. 11/746,928
→
RELEASABLE FASTENING DEVICE
App. No. 11/743,835
→
METHOD AND APPARATUS TO DETERMINE ROTATIONAL POSITION OF AN ELECTRICAL MACHINE
App. No. 11/743,901
→
METHOD AND SYSTEM FOR RESOLVER ALIGNMENT IN ELECTRIC MOTOR SYSTEM
App. No. 11/743,709
→
OIL PAN ASSEMBLY AND METHOD OF SELECTING AN OIL PAN
App. No. 11/738,631
→
METHOD FOR PRODUCING A STATOR ASSEMBLY
App. No. 11/737,220
→
BACKUP ALIGNMENT SYSTEM FOR AN INTERNAL MODE SWITCH
App. No. 11/733,426
→
METHOD OF SELECTING A TRANSMISSION SHIFT SCHEDULE
App. No. 11/733,164
→
SPLIT-PRESSURE DUAL PUMP HYDRAULIC FLUID SUPPLY SYSTEM FOR A MULTI-SPEED TRANSMISSION AND METHOD
App. No. 11/695,890
→
APPARATUS AND METHOD OF ASSEMBLING A PISTON ON A SHAFT OVER A LIP SEAL
App. No. 11/695,208
→
METHOD AND APPARATUS FOR CONTROLLING POWER FLOW IN A HYBRID POWERTRAIN SYSTEM
App. No. 11/731,653
→
CLUTCH EXHAUST ASSEMBLY AND METHOD
App. No. 11/685,963
→
THREE MODE ELECTRICALLY-VARIABLE TRANSMISSION
App. No. 11/678,635
→
ELECTRO-HYDRAULIC CONTROL SYSTEM WITH THREE-POSITION DOG CLUTCH ACTUATOR VALVE
App. No. 11/674,755
→
Thermoelectric methods to control temperature of batteries
App. No. 11/702,801
→
Integrated Load Following Anode Gas Pump and Cathode Gas Compressor for a Fuel Cell Power System
App. No. 11/669,994
→
METHOD AND APPARATUS FOR GENERALIZED RECURSIVE LEAST-SQUARES PROCESS FOR BATTERY STATE OF CHARGE AND STATE OF HEALTH
App. No. 11/669,196
→
ELECTRO-HYDRAULIC CONTROL SYSTEM WITH MULTIPLEXED TRIM VALVES FOR A TRANSMISSION
App. No. 11/627,604
→
MULTI-SPEED COUNTERSHAFT TRANSMISSION WITH A PLANETARY GEAR SET AND METHOD
App. No. 11/626,872
→
FUEL ECONOMY INDICATOR LAMP CONTROL SYSTEM
App. No. 11/626,488
→
ELECTRO-HYDRAULIC CONTROL SYSTEM WITH MULTIPLEXED PRESSURE SWITCH DIAGNOSTIC SYSTEM
App. No. 11/626,524
→
METHODS FOR MANUFACTURING MOTOR CORE PARTS WITH MAGNETIC ORIENTATION
App. No. 11/625,954
→
CONSTRUCTION FOR MULTI-LAYERED VACUUM SUPER INSULATED CRYOGENIC TANK
App. No. 11/656,361
→
ADAPTIVE RETARDER CONTROL METHOD AND APPARATUS
App. No. 11/622,590
→
AUTOMATIC BRAKING SYSTEM
App. No. 11/620,113
→
METHOD OF DETECTING AND PREVENTING TIE-UP DURING A DOUBLE TRANSITION UP-SHIFT
App. No. 11/619,204
→
CONTROL OF NITROGEN FRACTION IN A FLOW SHIFTING FUEL CELL SYSTEM
App. No. 11/612,108
→
OPTIMAL SELECTION OF INPUT TORQUE CONSIDERING BATTERY UTILIZATION FOR A HYBRID ELECTRIC VEHICLE
App. No. 11/607,726
→
ENGINE OVERRATE DETECTION METHOD AND APPARATUS
App. No. 11/565,066
→
INPUT BRAKE PROVIDING ELECTRIC ONLY FIXED GEAR
App. No. 11/564,200
→
GEAR CLASH LOGIC
App. No. 11/561,948
→
APPARATUS FOR EXPANDING GEAR SPEED RATIO COVERAGE OF AN AUTOMATIC TRANSMISSION
App. No. 11/561,025
→
SYSTEM FOR DETECTING PURGE VALVE MALFUNCTION
App. No. 11/560,986
→
DRIVER CONTROL INPUT DEVICE FOR DRIVE-BY-WIRE SYSTEM
App. No. 11/558,481
→