IP Library › Assignment 025245/0909
Patent Assignment
Reel/Frame 025245/0909

RELEASE OF SECURITY INTEREST

Recorded: 2010-11-04 Received: 2010-11-04 Pages: 40
Assignor
Assignee
GM GLOBAL TECHNOLOGY OPERATIONS, INC.
300 RENAISSANCE CENTER, DETROIT, MI, 48265-3000, UNITED STATES
Covered Applications (100)
TWO-STAGE TURBO-CHARGER ENGINE SYSTEM
App. No. 12/294,853
→
PROFILED ELEMENT FOR FASTENING A BUMPER TO LONGITUDINAL BEAMS OF A VEHICLE, AND METHOD THEREFOR
App. No. 12/298,717
→
METHOD OF OPERATING AN INTERNAL COMBUSTION ENGINE ARRANGEMENT
App. No. 12/303,357
→
Manual Transmission
App. No. 12/307,359
→
METHOD FOR CONTROLLING/REGULATING AN ELECTRONICALLY CONTROLLED DAMPING SYSTEM IN A CONVERTIBLE MOTOR VEHICLE
App. No. 12/293,544
→
CONSOLE FOR A VEHICLE
App. No. 12/307,119
→
CRASH BOX DEVICE
App. No. 12/294,577
→
VEHICLE WITH A LUGGAGE COMPARTMENT AND AN OPERATING ELEMENT
App. No. 12/293,886
→
FASTENING ARRANGEMENT FOR A GAS TANK OF A MOTOR VEHICLE
App. No. 12/303,360
→
FLANGING MACHINE AND METHOD FOR SPIN-FLANGING WORKPIECES
App. No. 12/281,945
→
BUMPER ARRANGEMENT IN OR FOR A MOTOR VEHICLE
App. No. 12/301,750
→
STEERING KNUCKLE FOR A VEHICLE
App. No. 12/295,756
→
FRONT SECTION FOR A MOTOR VEHICLE
App. No. 12/295,589
→
ARRANGEMENT AND METHOD TO OPERATE A COMBUSTION ENGINE WITH TWO DIFFERENT TYPES OF FUEL
App. No. 12/280,960
→
SYSTEM AND METHOD FOR PERFORMANCE LAUNCH CONTROL OF A VEHICLE
App. No. 12/340,806
→
VEHICLE LAMP ASSEMBLY
App. No. 12/340,794
→
SYSTEM AND METHOD FOR CHARGING A PLUG-IN ELECTRIC VEHICLE
App. No. 12/340,079
→
SUPPORT FOR AN ENTRANCE TRIM PANEL ON A CARRYING ELEMENT OF A MOTOR VEHICLE
App. No. 12/340,624
→
LAYERED RADIATION-SENSITIVE MATERIALS WITH VARYING SENSITIVITY
App. No. 12/339,308
→
RADIATOR ASSEMBLY FOR AN AUTOMOTIVE VEHICLE, AUTOMOTIVE VEHICLE AND METHOD FOR MOUNTING A RADIATOR ASSEMBLY ON A BODY STRUCTURE OF AN AUTOMOTIVE VEHICLE
App. No. 12/340,623
→
METHOD AND APPARATUS FOR SPEED-LIMIT FOLLOWING CRUISE CONTROL
App. No. 12/337,817
→
PNEUMATIC TIRE AND CONFIGURATION FOR REDUCING A TIRE NOISE
App. No. 12/338,851
→
MULTIPLE PRIORITY OPERATIONAL SPACE IMPEDANCE CONTROL
App. No. 12/338,697
→
CRANKING CAPABILITY ESTIMATION FOR A VEHICULAR STARTING SYSTEM
App. No. 12/338,054
→
ACTUATOR FOR ACTIVE MOTOR VEHICLE BONNET
App. No. 12/280,785
→
SOLENOID DIAGNOSTIC SYSTEMS FOR CYLINDER DEACTIVATION CONTROL
App. No. 12/338,017
→
DEACTIVATION OF HIGH PRESSURE PUMP FOR NOISE CONTROL
App. No. 12/338,093
→
METHOD TO ENCHANCE LIGHT LOAD HCCI COMBUSTION CONTROL USING MEASUREMENT OF CYLINDER PRESSURES
App. No. 12/338,028
→
METHOD AND APPARATUS FOR PROTECTING THE PRIVACY OF RESPONDER INFORMATION
App. No. 12/338,241
→
ELECTRICALLY VARIABLE TRANSMISSION HAVING THREE PLANETARY GEAR SETS WITH TWO FIXED INTERCONNECTIONS
App. No. 12/336,908
→
DETECTION OF DRIVER INTERVENTION DURING A TORQUE OVERLAY OPERATION IN AN ELECTRIC POWER STEERING SYSTEM
App. No. 12/336,819
→
BUSBAR ASSEMBLY WITH INTEGRATED COOLING
App. No. 12/336,800
→
METHOD OF BROACHING HARDENED STEEL WORKPIECES WITH DIAMOND-TIPPED TOOLS
App. No. 12/336,806
→
METHOD OF OPERATING A FUEL CELL SYSTEM IN STANDBY/REGENERATIVE MODE
App. No. 12/336,193
→
ADAPTIVE ANODE BLEED STRATEGY
App. No. 12/336,144
→
ACTIVE SUSPENSION SYSTEM FOR A VEHICLE AND METHOD OF OPERATING THE SAME
App. No. 12/335,946
→
METHOD OF STABILIZING A STACK AFTER COMPLETING STARTUP, WITHOUT EXTENDING THE STARTUP TIME
App. No. 12/336,114
→
VEHICLE FASCIA AND GRILLE ASSEMBLY
App. No. 12/335,594
→
AIR BAG CHUTE ATTACHMENT
App. No. 12/335,726
→
CATHODE FILTER REPLACEMENT ALGORITHM IN A FUEL CELL SYSTEM
App. No. 12/336,166
→
METHOD OF STARTING SPARK-IGNITION DIRECT INJECTION (SIDI) ENGINES
App. No. 12/335,989
→
METHOD OF COATING A SUBSTRATE WITH NANOPARTICLES INCLUDING A METAL OXIDE
App. No. 12/335,650
→
UP-SHIFT CONTROL IN AN AUTOMATIC TRANSMISSION WITH NEGATIVE INPUT TORQUE
App. No. 12/335,900
→
VEHICLE EXHAUST TIP ASSEMBLY
App. No. 12/335,710
→
JOINT-SPACE IMPEDANCE CONTROL FOR TENDON-DRIVEN MANIPULATORS
App. No. 12/335,153
→
EXHAUST OF A MOTOR VEHICLE
App. No. 12/335,439
→
RESERVE TORQUE FOR LEAN EQUIVALENCE RATIO REQUESTS
App. No. 12/334,778
→
ADAPTIVE VEHICLE CONTROL SYSTEM WITH DRIVING STYLE RECOGNITION BASED ON VEHICLE STOPPING
App. No. 12/335,237
→
ADAPTIVE VEHICLE CONTROL SYSTEM WITH DRIVING STYLE RECOGNITION BASED ON VEHICLE ACCELERATING AND DECELERATING
App. No. 12/335,263
→
TELESCOPABLE STEERING SPINDLE ARRANGEMENT
App. No. 12/333,942
→
BEHAVIOR-BASED LOW FUEL WARNING SYSTEM
App. No. 12/333,422
→
FUEL INJECTOR DIAGNOSTIC SYSTEM AND METHOD FOR DIRECT INJECTION ENGINE
App. No. 12/333,794
→
ANODE REACTIVE BLEED AND INJECTOR SHIFT CONTROL STRATEGY
App. No. 12/334,040
→
STATE MACHINE METHOD FOR EDITING REQUIREMENTS USING TRANSITION SYSTEMS, A SUB-STATE MECHANISM, AND A PARTIAL BEHAVIORS MECHANISM IN ORDER TO REDUCE COMPLEXITY AND THE NUMBER OF STATES
App. No. 12/334,089
→
ELECTRICAL ISOLATION OF A DRIVELINE SYSTEM VIA A NON-CONDUCTIVE INTERFACE ON A DRIVESHAFT ASSEMBLY
App. No. 12/333,606
→
Corrosion resistant laminated steel
App. No. 12/333,390
→
METHODS AND CONTROLS FOR HYDROGEN TO CATHODE INLET OF A FUEL CELL SYSTEM
App. No. 12/334,007
→
ELECTRICAL FUEL TRANSFER PUMP DIAGNOSTIC
App. No. 12/333,640
→
HYDRAULIC CLUTCH CONTROL SYSTEM
App. No. 12/333,591
→
RAVIGNEAUX GEARSET FOR AN AUTOMATIC TRANSMISSION
App. No. 12/333,865
→
THREE-STATE SWITCHABLE HYDRAULIC MOUNT
App. No. 12/333,583
→
METHOD TO ESTIMATE THE EFFECT OF WELD LOCATION ON WELD STRENGTH
App. No. 12/333,567
→
BRAKE CALIPER WITH REDUCED BRAKE SQUEAL
App. No. 12/333,362
→
MULTI-SPEED TRANSAXLE
App. No. 12/332,895
→
GEAR CLASH LOGIC
App. No. 12/332,884
→
ENGINE BALANCE SHAFT HOUSING AND METHOD OF ASSEMBLING SAME
App. No. 12/332,399
→
Self-Cleaning Welding Nozzle
App. No. 12/332,389
→
TUNGSTEN-CONTAINING HYDROGEN-STORAGE MATERIALS FOR ANODES OF PEM FUEL CELLS
App. No. 12/332,440
→
NOX EMISSION ESTIMATION SYSTEMS AND METHODS
App. No. 12/331,884
→
SYSTEM AND METHOD FOR MEASURING A FUEL LEVEL IN A VEHICLE FUEL TANK
App. No. 12/331,496
→
PLANAR TORSION SPRING
App. No. 12/331,844
→
METHODS OF REDUCING CORROSION BETWEEN MAGNESIUM AND ANOTHER METAL
App. No. 12/331,885
→
WELDED BLANK FOR VEHICLE DOOR PANEL
App. No. 12/331,678
→
TIRE PRESSURE MONITORING (TPM) SYSTEM AND METHOD OF OPERATING THE SAME
App. No. 12/331,484
→
PIVOTALLY DEPLOYABLE AIR DAM UTILIZING ACTIVE MATERIAL ACTUATION
App. No. 12/331,374
→
ONLINE WELD INSPECTION AND REPAIR METHOD FOR RESISTANCE WELDING AND WELD-BONDING
App. No. 12/330,784
→
CREEP MODE PROPULSION FOR STOP-START HYBRID VEHICLES
App. No. 12/316,023
→
ADJUSTABLE THREADING UTENSIL AND STRUCTURE UTILIZING SHAPE MEMORY ACTUATION
App. No. 12/331,350
→
Cooling Fan With One-Way Clutch Bearing
App. No. 12/330,662
→
Exhaust temperature and pressure modeling systems and methods
App. No. 12/316,022
→
METHODS AND APPARATUS FOR A PERMANENT MAGNET MACHINE WITH SEGMENTED FERRITE MAGNETS
App. No. 12/330,958
→
METHOD AND APPARATUS FOR CONTROLLING OPERATION OF A SPARK-IGNITION DIRECT-INJECTION ENGINE
App. No. 12/330,587
→
CHIP CATCHER FOR WELD TIP DRESSER
App. No. 12/329,857
→
MULTI-SPEED TRANSAXLE
App. No. 12/330,074
→
ROTARY-TYPE SELECTABLE ONE-WAY CLUTCH
App. No. 12/329,864
→
MULTI-SPEED TRANSAXLE
App. No. 12/330,052
→
SHIFT CONTROL UNIT AND METHOD FOR CONTROLLING A SHIFT PROCEDURE IN A STEPPED TRANSMISSION
App. No. 12/330,422
→
METHOD AND APPARATUS FOR CONTROLLING EXHAUST EMISSIONS IN A SPARK-IGNITION DIRECT-INJECTION ENGINE
App. No. 12/329,162
→
FLEXIBLE SUPPORT ASSEMBLY FOR VEHICLE TOOLING PLATES
App. No. 12/328,910
→
COMPONENT WITH INLAY FOR DAMPING VIBRATIONS
App. No. 12/328,989
→
MULTI-SPEED TRANSMISSIONS
App. No. 12/327,844
→
ENGINE CONTROL SYSTEM FOR INCREASED VEHICLE FUEL ECONOMY
App. No. 12/328,060
→
SHUTDOWN STRATEGY TO AVOID CARBON CORROSION DUE TO SLOW HYDROGEN/AIR INTRUSION RATES
App. No. 12/327,957
→
TRANSMISSION WITH INTEGRATED HOUSING FOR MOTOR AND CLUTCH
App. No. 12/328,081
→
SPEED CONTROL IN A TORQUE-BASED SYSTEM
App. No. 12/327,088
→
MECHANICALLY JOINED BIPOLAR PLATES AND METHOD THEREFOR
App. No. 12/327,080
→
CLUTCH FOR A TRANSMISSION
App. No. 12/327,707
→
MULTI-PUMP FUEL SYSTEM AND METHOD
App. No. 12/327,332
→
WELD GUN TIP DRESSING
App. No. 12/326,945
→
ACTIVE MATERIALS-BASED COMPLIANT MECHANISMS
App. No. 12/327,316
→