IP Library › Assignment 042523/0770
Patent Assignment
Reel/Frame 042523/0770

PATENT RELEASE (REEL:03817/FRAME:0737)

Recorded: 2017-05-22 Received: 2017-05-22 Pages: 24
Assignor
Assignees
DAYCO IP HOLDINGS, LLC
1650 RESEARCH DRIVE, SUITE 200, TROY, MI, 48083, UNITED STATES
DAYCO PRODUCTS, LLC
1650 RESEARCH DRIVE, SUITE 200, TROY, MI, 48083, UNITED STATES
Covered Applications (100)
LICENSE PLATE AND VIN SCAN/CODE CATALOG AND INFORMATION LOOKUP
App. No. 61/897,033
→
SNAP ACTUATOR CONTROLLING A VALVE
App. No. 61/894,159
→
NOISE ATTENUATION IN AN ASPIRATOR OR CHECK VALVE
App. No. 61/888,186
→
PRESSURE PISTON ACTUATOR WITH NON-RIGID SHAFT
App. No. 14/045,291
→
Solenoid-Powered Gate Valve
App. No. 61/872,402
→
TENSIONER WITH SINGLE TORSION SPRING HAVING MULTIPLE NESTED WINDINGS
App. No. 13/951,735
→
TENSIONER WITH MULTIPLE NESTED TORSION SPRINGS
App. No. 13/951,734
→
Multi-Aspirator System
App. No. 61/847,428
→
ACCESSORY DRIVE DECOUPLER
App. No. 13/922,805
→
VARIABLE FLOW VALVE FOR TURBOCHARGERS
App. No. 13/921,473
→
PNEUMATIC THROTTLE SENSING COMPRESSOR RECIRCULATION VALVES
App. No. 61/834,750
→
PNEUMATIC BOOST SENSING COMPRESSOR RECIRCULATION VALVES
App. No. 61/834,539
→
ASPIRATORS FOR PRODUCING VACUUM USING THE VENTURI EFFECT
App. No. 61/833,746
→
SNAP ACTUATOR CONTROLLING A VALVE
App. No. 61/829,463
→
CLUTCH FOR LINKING AN INPUT SHAFT WITH A DRIVE MECHANISM AND METHODS OF COUPLING CONTROL USING THE SAME
App. No. 13/866,479
→
MATERIAL COMPENSATION JOINT
App. No. 61/809,692
→
BELT TENSIONER FOR A POWER TRANSMISSION BELT SYSTEM
App. No. 13/835,009
→
ACCESSORY DRIVE DECOUPLER
App. No. 13/839,182
→
TENSIONER WITH EXPANDING SPRING FOR RADIAL FRICTIONAL ASYMMETRIC DAMPING
App. No. 13/834,989
→
TIRE PRESSURE MAINTENANCE APPARATUS AND SYSTEM
App. No. 13/844,155
→
WASTEGATE VALVE AND TURBOCHARGER HAVING SAME
App. No. 13/838,006
→
Efficiency Boost of Power Transmission to the Front End Accessory Drive
App. No. 61/794,429
→
V-RIBBED BELT WITH SPACED RIB FLANK REINFORCEMENT
App. No. 13/827,602
→
TURBOCHARGER WITH MAGNETIC BRAKE
App. No. 13/827,619
→
RECIRCULATING BALL SCREW ASSEMBLY
App. No. 13/790,078
→
ACCESSORY ADAPTER FOR LASER ALIGNMENT TOOL
App. No. 13/766,011
→
SNAP ACTUATOR CONTROLLING A VALVE
App. No. 61/752,291
→
PULLEY ASSEMBLY WITH A DECOUPLING MECHANISM
App. No. 13/713,247
→
MODULAR MANDREL FOR A MOLDING SYSTEM
App. No. 13/693,480
→
RECESSED BELT DAMPER
App. No. 13/676,895
→
FERRULE, HOSE COUPLING, AND METHODS OF MAKING SAME
App. No. 13/626,976
→
VIN SCAN/CODE CATALOG AND INFORMATION LOOKUP
App. No. 13/492,957
→
HYDRAULIC DAMPING MECHANISM AND USE FOR BELT TENSIONING
App. No. 13/472,757
→
TORSIONAL VIBRATION DAMPER WITH NONUNIFORM ELASTOMER PROFILE
App. No. 13/463,392
→
V-RIBBED BELT HAVING AN OUTER SURFACE WITH IMPROVED COEFFICIENT OF FRICTION
App. No. 13/459,730
→
SEALED BELT TENSIONING DEVICE
App. No. 13/432,548
→
BELT TENSIONING DEVICE WITH VARIABLE SPRING FACTOR
App. No. 13/400,447
→
BELT TENSIONING DEVICE WITH LOCATING PIN
App. No. 13/399,552
→
FLATWIRE RADIAL ASYMMETRIC DAMPING BY COIL REACTION PATH
App. No. 13/251,565
→
CLUTCHED DAMPER FOR A BELT TENSIONER
App. No. 13/208,012
→
MODULAR MOLDING SYSTEM
App. No. 13/164,377
→
ALIGNMENT LASER AND ALIGNMENT TARGET
App. No. 29/393,335
→
PULLEY WITH ASYMMETRIC TORQUE-SENSITIVE CLUTCHING
App. No. 13/050,019
→
TENSIONER WITH EXPANDING SPRING FOR RADIAL FRICTIONAL ASYMMETRIC DAMPING
App. No. 13/008,357
→
Belt Tensioner
App. No. 12/986,472
→
TENSIONER WITH EXPANDING SPRING FOR RADIAL FRICTIONAL ASYMMETRIC DAMPING
App. No. 12/874,797
→
BELT TENSIONER WITH DAMPING MEMBER
App. No. 12/858,548
→
RADIAL DAMPING MECHANISM AND USE FOR BELT TENSIONING
App. No. 12/820,400
→
LOW NOISE PULLEY
App. No. 12/792,003
→
ONE-WAY DAMPED OVER-ARM TENSIONER
App. No. 12/786,825
→
GAGE
App. No. 29/356,602
→
PULLEY WITH ASYMMETRIC TORQUE-SENSITIVE CLUTCHING
App. No. 12/713,580
→
PULLEY ALIGNMENT SYSTEM
App. No. 12/604,037
→
CAP RETAINER AND A PULLEY ASSEMBLY INCLUDING THE CAP RETAINER AND METHOD OF ASSEMBLY
App. No. 12/566,088
→
DEFLECTED BEARING SHIELD AS A BEARING SEAL FOR A PULLEY ASSEMBLY AND METHOD OF ASSEMBLY
App. No. 12/539,104
→
ACTIVE VIBRATIONAL DAMPER
App. No. 12/507,955
→
V-RIBBED BELT HAVING AN OUTER SURFACE WITH IMPROVED COEFFICIENT OF FRICTION
App. No. 12/391,505
→
CLUTCHED DAMPER FOR A BELT TENSIONER
App. No. 12/265,268
→
BELT TENSIONER AND METHOD FOR MAKING A BELT-TENSIONER ARM AND A SPRING CASE
App. No. 12/208,420
→
DECOUPLED VIBRATION DAMPER
App. No. 12/195,023
→
PULLEY WITH TORQUE-SENSITIVE CLUTCHING
App. No. 12/112,393
→
CAST CRANKSHAFT DAMPER ASSEMBLY
App. No. 11/934,232
→
DECOUPLED VIBRATION DAMPER
App. No. 11/861,921
→
COMPRESSED HUB DAMPER
App. No. 11/770,076
→
RECESSED BELT DAMPER
App. No. 11/770,085
→
POWER TRANSMISSION BELT
App. No. 11/592,972
→
ONE-WAY CLUTCHED DAMPER FOR AUTOMATIC BELT TENSIONER
App. No. 11/514,138
→
ONE-WAY CLUTCHED DAMPER FOR AUTOMATIC BELT TENSIONER
App. No. 11/514,135
→
ONE-WAY CLUTCHED DAMPER FOR AUTOMATIC BELT TENSIONER
App. No. 11/514,136
→
TORSIONAL VIBRATION DAMPER
App. No. 11/425,924
→
BELT TENSIONER AND METHOD FOR ASSEMBLY
App. No. 11/302,335
→
BELT TENSIONER UTILIZING ASYMMETRIC MOTION CONTROL
App. No. 11/284,809
→
COMBINATION DUST COVER AND BEARING RETENTION MEMBER
App. No. 11/238,961
→
PULLEY ASSEMBLY FOR MAINTAINING CONSTANT POSITION OF A BEARING OUTER RACE RELATIVE TO A PULLEY, AND METHOD
App. No. 11/238,212
→
BELT TENSIONER WITH DAMPING MEMBER
App. No. 11/171,137
→
APPARATUS FOR INDICATING POWER TRANSMISSION BELT DYNAMICS
App. No. 11/110,672
→
BELT TENSIONER
App. No. 11/040,283
→
ADHESIVE COMPOSITION FOR ADHERING TEXTILES TO EPDM RUBBER
App. No. 11/033,353
→
BELT TENSIONER SYSTEM
App. No. 10/991,661
→
BELT TENSIONER AND METHOD FOR MAKING A BELT-TENSIONER ARM AND A SPRING CASE
App. No. 10/982,718
→
ACTIVE VIBRATIONAL DAMPER
App. No. 10/969,887
→
TENSIONER WITH DRAINHOLE
App. No. 10/962,296
→
AUTOMOTIVE STARTING SYSTEM AND METHOD
App. No. 10/939,840
→
ONE-WAY CLUTCHED DAMPER FOR AUTOMATIC BELT TENSIONER
App. No. 10/939,839
→
MAGNETORHEOLOGICAL FLUID V-RIBBED BELT TENSIONER WITH THROUGH SHAFT
App. No. 10/848,768
→
SINGLE INERTIA BENDING DAMPER
App. No. 10/802,104
→
DUAL FRICTION SURFACE ASYMMETRIC DAMPED TENSIONER
App. No. 10/766,141
→
COUPLING STRUCTURE MOUNTABLE TO A ROTATABLE SHAFT
App. No. 10/657,954
→
IDLER PULLEY WITH INTEGRAL BEARING CARRIER INSERT AND METHOD
App. No. 10/654,567
→
PROFILED TIP POWER TRANSMISSION BELT
App. No. 10/636,788
→
ELECTROLYTIC CAPACITOR FOR USE IN AN IMPLANTABLE MEDICAL DEVICE
App. No. 10/452,424
→
LOW MODULUS BELT FOR AUTOMOTIVE APPLICATIONS
App. No. 10/438,755
→
BELT TENSIONER HAVING AN AUTOMATICALLY ADJUSTABLE TRAVEL STOP
App. No. 10/421,046
→
ELASTOMER COMPOSITION FOR POWER TRANSMISSION BELT TOOTH FACING
App. No. 10/421,267
→
HYDRAULIC ASYMMETRIC DAMPED BELT TENSIONER
App. No. 10/421,451
→
BELT TENSIONER WITH INTEGRAL DAMPING
App. No. 10/198,214
→
TOOL FOR INSTALLATION AND REMOVAL OF POWER TRANSMISSION BELTS
App. No. 10/140,048
→
ADHESIVE COMPOSITION AND METHOD FOR ADHERING TEXTILES TO EPDM RUBBER
App. No. 10/093,281
→
BELT TENSIONER WITH PIVOT BUSHING
App. No. 10/075,898
→
METHOD TO IMPROVE ADHESION BETWEEN PRE-CURED ELASTOMER AND METAL SURFACE
App. No. 10/057,474
→