Patent Assignment
Reel/Frame 036777/0904
Release of Security Interest
Recorded: 2015-10-05
Pages: 45
Assignor
GENERAL ELECTRIC CAPITAL CORPORATION, AS COLLATERAL AGENT
Executed: 2015-09-30
Assignee
INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
28333 TELEGRAPH ROAD, SOUTHFIELD, MICHIGAN, VIRGINIA, 48034
Covered Properties
(270)
Automobile Sun Visor Vanity Mirror Module
Patent:
5,267,090 →
Application:
07/257,652 →
Novel Composite Article and Method of Making Same
Patent:
4,983,442 →
Application:
07/553,197 →
Vanity Mirror Assembly
Patent:
5,059,016 →
Application:
07/564,904 →
Method of Assembling Modular Headliner to a Vehicle by Snap-Fitting
Patent:
5,105,521 →
Application:
07/566,016 →
Sunvisor with Covering Attachment Mechanism
Patent:
5,031,950 →
Application:
07/570,864 →
Locking Pins for Vehicular Sun Visor Assembly
Patent:
5,131,711 →
Application:
07/576,204 →
Vehicular Sun Visor Assembly
Patent:
5,054,839 →
Application:
07/576,357 →
Vehicle Sunvisor Including Mechanism for Securing Covering on Sunvisor and Supporting Sunvisor Within Vehicle and Method of Making Same
Patent:
5,056,852 →
Application:
07/649,908 →
Novel Floor Mat and Process of Forming the Same
Patent:
5,171,619 →
Application:
07/687,234 →
Floor Mat and Method of Making Same
Patent:
5,154,961 →
Application:
07/694,966 →
Storage Armrest and Drink Holder with Breakaway Hinge
Patent:
5,104,187 →
Application:
07/699,497 →
Storage Armrest and Drink Holder with Spring Loaded Arms
Patent:
5,104,185 →
Application:
07/699,498 →
Mechanical Latch
Patent:
5,116,099 →
Application:
07/700,577 →
Vehicle Cupholder with Locking Mechanism
Patent:
5,131,716 →
Application:
07/700,578 →
Method of Aligning and Installing an Automobile Headliner by a Previously Attached Sunshade Assembly
Patent:
5,269,060 →
Application:
07/702,436 →
Recycling of Thermosetting Polyurethane Soft Foam.
Patent:
5,185,380 →
Application:
07/719,148 →
Sunvisor Spring Clip and Attachment Mechanism
Patent:
5,139,303 →
Application:
07/730,700 →
Vehicular Sun Visor Assembly
Patent:
5,205,639 →
Application:
07/733,298 →
Self-Mounting Automobile Dome Lamp Assembly
Patent:
5,239,449 →
Application:
07/734,845 →
Retainer Ring
Patent:
5,121,963 →
Application:
07/743,114 →
Method of Ultrasonically Bonding Thermoplastic to Fibers
Patent:
5,269,860 →
Application:
07/786,268 →
Method for Formjing Plastic Molded Panels with Inserts
Patent:
5,340,425 →
Application:
07/798,576 →
Automobile Sun Visor Vanity Mirror Module
Patent:
5,278,736 →
Application:
07/839,423 →
Vehicle Console with Positive Push-Push Door Latch
Patent:
5,267,761 →
Application:
07/846,543 →
Apparatus for Securing Fabric to a Visor
Patent:
5,338,082 →
Application:
07/869,462 →
Floor Mat and Method of Making Same
Patent:
5,362,544 →
Application:
07/872,456 →
A Process for Manufacturing a Sound Insulating Structure
Patent:
5,334,338 →
Application:
07/895,213 →
Method for Forming Plastic Molded Panels with Inserts
Patent:
5,411,688 →
Application:
07/905,799 →
Stowaway Armrest
Patent:
5,290,092 →
Application:
07/965,815 →
Visor Detent Spring Clip
Patent:
5,338,083 →
Application:
08/009,548 →
Floor Mat for an Overland Vehicle
Patent:
5,439,725 →
Application:
08/049,848 →
Power Pack for an Automotive Exterior Mirror Assembly
Patent:
5,363,246 →
Application:
08/060,268 →
Method for Molding a Trim Panel with Integrally Formed Simulated Leather Appliques
Patent:
5,439,630 →
Application:
08/114,928 →
Method of Producing Stratiform Articles and Products
Patent:
6,165,404 →
Application:
08/133,283 →
Interior Lamp for an Automotive Vehicle
Patent:
5,357,408 →
Application:
08/134,095 →
Sun Visor System
Patent:
5,417,466 →
Application:
08/147,730 →
Variable Density Motor Vehicles Carpet
Patent:
5,474,829 →
Application:
08/185,397 →
Mounting Bracket for a Sun Visor
Patent:
5,451,022 →
Application:
08/199,824 →
Viscoelastic Damping Foam Having an Adhesive Surface
Patent:
6,420,447 →
Application:
08/204,162 →
Decorative Panels for Automobile Interiors
Patent:
5,462,786 →
Application:
08/212,399 →
Method for Forming Plastic Molded Panels Having an Undercut Edge
Patent:
6,726,872 →
Application:
08/225,965 →
Method for Forming Plastic Molded Panels with Inserts
Patent:
5,529,742 →
Application:
08/241,970 →
Filler Body as Molded Part for Sealing Poorly Accessible Hollow Spaces
Patent:
5,529,824 →
Application:
08/244,466 →
Method for Binding Tufts
Patent:
5,536,551 →
Application:
08/276,412 →
Method for Making Embossed Laminated Foam Articles
Patent:
5,490,890 →
Application:
08/297,411 →
Method for Electromagnetically Welding Thermoplastic Articles Together
Patent:
5,538,581 →
Application:
08/382,441 →
Molded Plastic Panel Having Intregrated, Localized Soft-Touch Aesthetic Feature
Patent:
5,626,382 →
Application:
08/416,033 →
A Molded Trim Panel with Integrally Formed Simulated Leather Appliques and a Method for Molding Same
Patent:
5,571,597 →
Application:
08/425,880 →
Method of Forming a Variable Density Motor Vehicle Carpet
Patent:
5,605,108 →
Application:
08/529,562 →
Popup a/C Outlet
Patent:
5,752,877 →
Application:
08/608,608 →
Apparatus for Multiple Sheet Line Molding
Patent:
5,843,492 →
Application:
08/661,625 →
Modular Sound-Deadening Covering
Patent:
5,876,826 →
Application:
08/663,202 →
Shade Assembly Mount for Vehicle Compartment
Patent:
5,881,793 →
Application:
08/677,815 →
Vehicle Trim Panel with Natural Fiber Layers
Patent:
5,804,262 →
Application:
08/699,108 →
Method of Manufacturing a Composite Foam from Foam Flakes, Composite Foam, and Use of This Composite Foam
Patent:
6,228,478 →
Application:
08/732,276 →
Load Floor Lining Having Integrated Sound Insulation
Patent:
5,979,962 →
Application:
08/737,670 →
Lamp Assembly with Light Pipe, Light Pipe and Light Pipe/Lens Assembly
Patent:
5,791,772 →
Application:
08/784,028 →
Insert for the Map Pocket of a Motor Vehicle
Patent:
6,116,672 →
Application:
08/799,791 →
Overhead Console with Drop-Down Door
Patent:
6,003,925 →
Application:
08/804,354 →
Blow Molding Process
Patent:
5,885,515 →
Application:
08/812,210 →
Vehicle Instrument Panel with Seamless Airbag Cover
Patent:
5,997,030 →
Application:
08/816,791 →
Visor Torque Control
Patent:
5,924,748 →
Application:
08/837,175 →
Automotive Interior Pull Handle Assembly
Patent:
5,931,525 →
Application:
08/868,592 →
High Modulus and Stiffness Polymer Foam/Gmt Composites
Patent:
5,900,300 →
Application:
08/886,947 →
Sun Visor
Patent:
5,887,933 →
Application:
08/893,169 →
Garage Door Opener Bin
Patent:
5,887,929 →
Application:
08/896,043 →
Grip Handle Assembly and Method of Assembling Same
Patent:
5,975,606 →
Application:
08/920,590 →
Method for Forming Plastic Molded Panels with Inserts
Patent:
5,824,251 →
Application:
08/923,102 →
Vehicle Spare Tire Storage System Having a Reinforced Cover
Patent:
5,971,462 →
Application:
08/939,024 →
Recycling of Carpet Scrap
Patent:
5,859,071 →
Application:
08/998,953 →
Vehicle Trim Panel with Natural Fiber Layers
Patent:
5,976,646 →
Application:
09/032,675 →
Instrument Panel Seamless Airbag Cover
Patent:
6,089,642 →
Application:
09/036,762 →
Modular Wire Harness and Carpet for Vehicle
Patent:
5,965,951 →
Application:
09/037,596 →
Method for Molding Headliners
Patent:
6,146,578 →
Application:
09/048,496 →
Vehicle Load Floor and Method of Making Same
Patent:
6,136,259 →
Application:
09/111,913 →
Recycling Trim Components for Vehicles
Patent:
6,110,580 →
Application:
09/130,173 →
Sound-Dampened Automobile Interior Components and Methods for Making Same
Patent:
6,112,848 →
Application:
09/159,157 →
Method of Making a Floor Mat Having a Channel
Patent:
36,677 →
Application:
09/163,995 →
Pleated Nonwoven Products and Methods of Constructing Such Products
Patent:
6,534,145 →
Application:
09/181,404 →
Vehicle Spare Tire Storage System
Patent:
6,033,003 →
Application:
09/201,971 →
Air Outlet Assembly Having Controllable Effort Generation
Patent:
6,059,653 →
Application:
09/221,512 →
Method for Forming Headliners
Vehicle Door Assembly with a Trim Panel Forming a Structural Door Module Component Carrier
Patent:
6,546,674 →
Application:
09/288,602 →
Vehicle Visor Having Snap-in Support Pin
Patent:
6,120,086 →
Application:
09/300,192 →
Recycling of Carpet Scrap and Compositions Employing Ultralow Density Polyethylene (Uldpe)
Patent:
6,241,168 →
Application:
09/329,607 →
Insertable Vehicle Floor Drain
Patent:
6,290,279 →
Application:
09/344,512 →
Throw-In Mat for a Vehicle Floor
Patent:
6,340,513 →
Application:
09/444,164 →
Tool Retaining Vehicle Spare Tire Storage System
Method of Recycling Scrap Material Containing a Thermoplastic
Patent:
6,576,176 →
Application:
09/526,974 →
Energy Absorbing Bracket Assembly for Vehicle Knee Bolster
Patent:
6,491,322 →
Application:
09/531,738 →
Apparatus for molding articles
Patent:
6,338,618 →
Application:
09/551,789 →
Gas Flow-Through Line with Sound Absorption Effect
Patent:
6,715,580 →
Application:
09/554,301 →
Protective Device for Side-on Collisions
Patent:
6,443,485 →
Application:
09/554,936 →
Method of making a sunroof sunshade
Patent:
6,295,711 →
Application:
09/597,867 →
Dual Stage Fastener
Patent:
6,431,585 →
Application:
09/679,755 →
Modular Vehicle Door and Method of Assembly
Crash Box Component Holder
Patent:
6,422,644 →
Application:
09/786,406 →
Molded Acoustic and Decorative Mats and Methods for Forming the Same
Patent:
6,382,350 →
Application:
09/824,540 →
Casing Module Comprising an Airbag
Patent:
6,502,855 →
Application:
09/868,794 →
Sound Attenuating Material for Use Within Vehicles and Methods of Making Same
Method of Making a Vehicle Floor Covering with Integral Threaded Drain Tube
Method and Apparatus for Molding a Soft Trim Component Onto a Substrate
Multi-Density Sound Attenuating Laminates and Methods of Making Same
Sound Attenuating Composite Articles Incorporating Scrim Material and Methods of Making Same
Visor Assembly with Extender Blade
Modular Overhead Console Assembly
Floor Mats Having Peripheral Apertures with Acoustic Absorbing Material
Patent:
6,595,321 →
Application:
10/109,501 →
Spray Urethane Tool and System
Modular Headliner Assembly with Air Curtains
Lightweight Acoustical System
Patent:
39,010 →
Application:
10/171,181 →
Blow Molded Multiple Function Assemblies for Vehicle Headliners
Damping Foil Consisting of Several Layers and a Method for Producing Same
Climate Control System Outlet
Patent:
6,685,555 →
Application:
10/241,098 →
Method for Making Vehicle Door
Pneumatic Pressure Molded Impact Countermeasure
Patent:
6,698,819 →
Application:
10/248,013 →
Carpet Molding Process
Door Module Water Shield
Patent:
6,767,049 →
Application:
10/248,995 →
Plastic Injection Molded Articles with Hollow Rib Members
Overhead Console Active Night Vision System for an Interior Cabin of a Vehicle
Patent:
6,795,237 →
Application:
10/250,071 →
Open Mold Molding
Multiple Cavity Gas Assisted Plastic Injection Molding
Patent:
6,787,097 →
Application:
10/250,281 →
Plastic Injection Molding with Moveable Insert Members
Porous Carpeting for Vehicles and Methods of Producing Same
Trim Component with Mounted Light Source for Indirectly Lighting the Interior of a Vehicle
Hybrid Vehicle Interior Component
Vehicle Carpet System with Floor Mat Retention Apparatus
Vehicle Headliner
Coextruded Living Hinge, a Component Incorporating the Hinge, and Methods of Making the Component
Interior Attachment Apparatus and Method for a Vehicle Component
Method for Injection Molding of Plastic Materials Using Gas Holding Pressure in Mold
Modular Vehicle Door Assembly
Foam in Place Urethane for Structural Headliners
Integrated Door Module
Slidable Sun Visor Assembly
Method of Forming a Vehicle Component
Method of Forming a Vehicle Panel Assembly
Modular Overhead Console Assembly
Apparatus and Methods of Forming Sound Attenuating Laminates Having Fiber and Mass Layers
Vehicle Floor Coverings and Methods of Making Same
Method of Forming a Vehicle Trim Panel
Injection Molding System Having a Removable in-Mold Degating Insert
Method of Making an Interior Trim Part
Foam in Place Composite One-Piece Hard/Soft Panel
Fluid Delivery System for Spray Applicator
Plastic Skin Forming Process
Adhesive Precoated Headliner Materials
Air Duct Outlet with Single Vane Air Stream Direction Control
Sound Absorptive Multilayer Articles and Methods of Producing Same
Method for Making an Automotive Punched Headliner
Multi-Shot Molding Method and Assembly
Plastic Skin Forming Process
Air Duct Outlets with Manual and Automatic Air Stream Direction Control
Thermally Controlled Storage Space System for an Interior Cabin of a Vehicle
Low Pressure Laminate Gas Assist Molding
Automotive Interior Trim Component with Soft Feel
Automotive Instrument Panel
Automotive Interior Trim Assembly and Pad Insertion
Gas Pin for Thermocouple for Gas Assisted Injection Molding
Dual Function Console Lamp with Integrated Switching
Vehicle Trim Panel with Integral Nibbed Armrest
Radio Bin Spacer
Automotive Hardware Carrier and Method of Making Same
Door Trim Bolster with Electroluminescent Lamp and Injection Moldilng Method of Making Same
Door Trim Speaker Grille with Electroluminescent Lamp and Injection Molding Method of Making Same
Automotive Storage Compartment Having an Electroluminescent Lamp and Method of Making the Same
Guiding Pillar Trim for a Side-Curtain Airbag System
G-Force Push-Push Latch
Method of Manufacturing an Airbag Assembly and Vehicle Trim Component
Method of Manufacturing an Airbag Assembly and Vehicle Trim Component
Trim Panel Having Foam Bridge Supported Hidden Tear Seam
Instrument-Panel Mounting System
Composite Shoddy and Method of Manufacturing Same
Sonic Weld Sunroof Trim Ring
Connector Housing with Integrated Lamp and Switch
Overhead Console for a Vehicle
Patent:
40,617 →
Application:
10/758,563 →
Dual Use Molding Tool
100% Grained with Non-Shut-Off Condition Two Shot Interior Component
Load Bearing Vehicle Floor Mats
Armrest Having Armrest Bun and Method of Manufacture
Portable Tray for Vehicle Interior
Two-Shot Polymeric Component with Attachment Feature and Method of Producing Same
Method of Forming a Vehicle Component
Removable Storage Module for Vehicle
Method of Forming a Vehicle Component
Lightweight Acoustic Automotive Carpet
Sound Absorbing/Sound Blocking Automotive Trim Products
Trim Panel Assembly Having Integrated Energy Management Characteristics and Method of Manufacture
Trim Panel Assembly Having an Integrated Door Bumper and Method of Manufacture
Patent:
6,945,583 →
Application:
10/852,276 →
Method of Over-Molding Tpe Components Using Zero Gate
Headliner Apparatus with Foam Imbedded Nvh Pad
Method of Forming a Vehicle Component
Porous Carpeting for Vehicles and Methods of Producing Same
Automotive Trim Part with Applique and Method of Making Same
Automotive Armrest with Soft Feel and Method of Making the Same
Automotive Handle with Soft Feel and Method of Making the Same
Automotive Trim Assembly Having an Integrated Airbag Door
Low-Friction Sleeve Insert for a Visor Bearing
Vehicle Storage Assembly with Adjustable Door
Process Control for Gas-Assisted Injection Molding Applications
Vehicle Door Trim Bolster with Multi-Feel Cover and Method of Making the Same
Acoustic Insulator with Controlled Airflow Resistance and Method of Making Same
Adjustable Beam Lamp
Configurable Panel for Vehicle Overhead Console
Patent:
7,032,945 →
Application:
10/904,790 →
Automotive Open Base Foam Armrest Assembly
Integrated Center Stack for a Motor Vehicle
Integral Doghouse Fastener with Retaining Feature
System and Method for Electrical Power Track and Slidable Accessories
Structural Rail System for Supporting an Overhead Console
Invertible Storage Compartment Divider
Modular Trim Assembly with Air Curtain for a Motor Vehicle
A Modular Vehicle Interior Component System and Release Latch Mechanism for Use with the System
Method of Making an Interior Panel for a Door and an Article Made Thereby
Method of Making an Integrated Door Inner Panel and an Article Made Thereby
Interior Vehicle Trim Panel Having a Sprayed Expanded Polyurethane Layer and Method and System of Making Same
Multi-Density Sound Attenuating Laminates and Methods of Making Same
Vehicle Floor Mats Having Integral Hook Retention
Interior Lining Part
Console Latch Assembly
Assembly for Supporting an Article in a Vehicle
Apparatus for Molding a Trim Panel Assembly Having a Narrow Transition Radius
Console and Object Holder Assembly for a Vehicle
Storage Pocket Assembly for a Vehicle Door Trim Panel
Patent:
6,971,698 →
Application:
11/053,963 →
Automotive Bolster with Soft Feel and Method of Making the Same
Airbag Chute Assembly
Blow Molded Article Having an Integrally Molded Living Hinge and Method of Making the Same
A Trim Panel and a Method of Manufacture
Trim Panel with Edge Seal
Visor Attachment Member
Trim Panel Assembly Having a Pivotal Light Mechanism
Console Assembly for a Vehicle
Foam in Place Composite One-Piece Hard/Soft Panel
Nesting Console System
Critical Seam Alignment of Soft Trim to Automobile Components
Plastic Bracket Countermeasure for Door Side Impact
Snap-In Decorative Articles for Vehicle Interiors
Methods of Forming Vehicle Interior Components Which Include a Decoupler Layer
Random Incident Absorber Approximation
Removable Storage Module for Vehicle
Console Assembly for a Vehicle
Low-Density Part Injection Molding System
Removable in-Mold Degating Insert
Dual Stage Vehicle Interior Trim Fastener
Tunable Geometry for Energy Absorbing Foam to Lower Peak Load During Side Impact
Console and Light Assembly
Vehicle Cup Holder with Improved Support Member
Upper Glove Box Latch Housing Knee Impact Protector
A Pocketed Panel Assembly
System for Attaching an Article Holding Assembly to a Mounting Member in a Vehicle
Trim Panel Having Foam Bridge Supported Hidden Tear Seam
Console Assembly for a Vehicle
In Mold Lamination of Decorative Products
Hollow Structural Member with Reinforced Bulwark and Process for Producing Same
Lightweight Acoustic Automotive Carpet
Sound Absorbing/Sound Blocking Automotive Trim Products
Slidable Floor Console
Trim System for a Vehicle Door
Airbag Assembly with Angled Keyway
Patent:
7,234,724 →
Application:
11/535,121 →
Airbag Assembly
Illuminated Visor Vanity
System to Establish a Trim Edge for a Vehicle Roof Window
Console Assembly for a Vehicle
Integrated Center Stack for a Motor Vehicle
Method of Making an Interior Panel for a Door and an Article Made Thereby
Method of Sewing a Decorative Seam and Trim Component Made by That Method
Vehicle Rail Module Exterior Surface Incorporating a Handle, Coathook and Lamp
Patent:
379,170 →
Application:
29/032,836 →
Vehicle Rail Module Exterior Surface Incorporating a Handle Coathook and Lamp
Patent:
400,839 →
Application:
29/057,275 →
Removable Storage Container for Motor Vehicle
Patent:
393,623 →
Application:
29/066,605 →
Storage Container for Motor Vehicles
Patent:
391,223 →
Application:
29/066,906 →
Vehicular Coat Hook Assembly
Patent:
403,998 →
Application:
29/071,095 →
Icon for Vehicle Speedometer Display
Patent:
422,545 →
Application:
29/081,009 →
Related Assignments
(25)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignors Interest.
Jan 17, 1989
From: DOWD, JAMES D.; BURDICK, ROBERT C.
To: UNITED TECHNOLOGIES AUTOMOTIVE, INC.
Reel/Frame 005026/0932 →
Assignment of Assignors Interest.
Jul 13, 1990
From: PATEL, TUSHAR M.; BERG, RICHARD E.
To: UNITED TECHNOLOGIES AUTOMOTIVE, INC., A CORP. OF DE
Reel/Frame 005380/0389 →
Assignment of Assignors Interest.
Aug 9, 1990
From: LAWASSANI, ABDI; FELIKS, ROBERT C.
To: UNITED TECHNOLOGIES AUTOMOTIVE, A DE CORP.
Reel/Frame 005451/0058 →
Assignment of Assignors Interest.
Aug 31, 1990
From: LAFERLE, DENNIS M.
To: JAY WHITE SALES AND ENGINEERING, INC., A CORP. OF MI
Reel/Frame 005433/0607 →
Assignment of Assignors Interest.
Sep 17, 1990
From: MILLER, DOUGLAS C.
To: PLASTA FIBER INDUSTRIES, INC., A CORP. OF MN
Reel/Frame 005479/0688 →
Assignment of Assignors Interest.
Feb 4, 1991
From: MILLER, DOUGLAS C.
To: PLASTA FIBER INDUSTRIES, INC., A CORP. OF MICHIGAN
Reel/Frame 005595/0814 →
Assignment of Assignors Interest.
Apr 18, 1991
From: REUBEN, HAROLD
To: AKRO CORPORATION, THE
Reel/Frame 005685/0181 →
Assignment of Assignors Interest.
May 14, 1991
From: CHRISTIANSEN, NED F.; KWASNIK, KENNETH
To: LEAR SEATING CORPORATION A CORPORATION OF DE
Reel/Frame 005713/0465 →
Assignment of Assignors Interest.
May 14, 1991
From: FISCHER, WILLIAM J.; CHRISTIANSEN, NED F.
To: LEAR SEATING CORPORATION A CORPORATION OF DE
Reel/Frame 005713/0472 →
Assignment of Assignors Interest.
May 14, 1991
From: KWASNIK, KENNETH; HARRELL, DAVID J.
To: LEAR SEATING CORPORATION A CORPORATON OF DE
Reel/Frame 005713/0496 →
Assignment of Assignors Interest.
May 14, 1991
From: KWASNIK, KENNETH; HARRELL, DAVID J.
To: LEAR SEATING CORPORATION A CORPORATION OF DE
Reel/Frame 005713/0477 →
Assignment of Assignors Interest.
Jun 3, 1991
From: REUBEN, HAROLD
To: AKRO CORPORATION, THE A CORP. OF OHIO
Reel/Frame 005734/0140 →
Assignment of Assignors Interest.
Jul 16, 1991
From: MILLER, DOUGLAS C.
To: PLASTA FIBER INDUSTRIES, INC.,
Reel/Frame 005823/0174 →
Assignment of Assignors Interest.
Aug 9, 1991
From: KWASNIK, KENNETH J.; HARRELL, DAVID
To: LEAR SEATING CORPORATION
Reel/Frame 005809/0218 →
Assignment of Assignors Interest.
Sep 26, 1991
From: WNUK, JOSEPH; CZARNECKI, CARL G.
To: UNITED TECHNOLOGIES AUTOMOTIVE A CORPORATION DELAWARE
Reel/Frame 005856/0486 →
Assignment of Assignors Interest.
Nov 1, 1991
From: RICE, JEFFREY L.
To: MASLAND INDUSTRIES, INC.,
Reel/Frame 005902/0662 →
Assignment of Assignors Interest.
Nov 4, 1991
From: DIESSEL, CORNELIA; KLIWER, CARSTEN; BURAK, GERHARD; BLUMEL, EHRENFRIED
To: STANKEIWICZ GMBH
Reel/Frame 005897/0927 →
Assignment of Assignors Interest.
Feb 12, 1992
From: PLASTA FIBER INDUSTRIES, INC.
To: PF ACQUISITION CO.,
Reel/Frame 006012/0232 →
Security Interest
Feb 14, 1992
From: PF ACQUISITION CO., A DE CORP.
To: BANK OF NOVA SCOTIA, THE
Reel/Frame 006012/0721 →
Assignment of Assignors Interest.
Apr 15, 1992
From: MILLER, DOUGLAS C.
To: PLASTA FIBER INDUSTRIES, INC.
Reel/Frame 006108/0392 →
Assignment of Assignors Interest.
Apr 20, 1992
From: FALCOFF, MONTE L.; BOGUSZEWICZ, GEORGE; SWIATOCHA, JOHN
To: UNITED TECHNOLOGIES AUTOMOTIVE, INC., A CORP. OF DE
Reel/Frame 006091/0797 →
Assignment of Assignors Interest.
May 28, 1992
From: CURTINDALE, EDWARD G.; BROW, MARK J.
To: UNITED TECHNOLOGIES AUTOMOTIVE A DE CORP.
Reel/Frame 006138/0383 →
Assignment of Assignors Interest.
Jan 21, 1993
From: FALCOFF, MONTE L.; BOGUSZEWICZ, GEORGE; SWIATOCHA, JOHN; MORICONI, LEONARD E.
To: UNITED TECHNOLOGIES AUTOMOTIVE, INC.
Reel/Frame 006399/0741 →
Change of Name
Sep 23, 1993
From: ALLIED-SIGNAL INC.
To: ALLIEDSIGNAL INC.
Reel/Frame 006704/0091 →
Assignment of Assignor's Interest
May 31, 1994
From: WHITE, JAY E.; WHITE, JAY R.
To: JAY ROBERTS COMPANY
Reel/Frame 007007/0078 →