Patent Assignment
Reel/Frame 036777/0821
Release of Security Interest
Recorded: 2015-10-05
Pages: 24
Assignor
THE BANK OF NEW YORK MELLON
Executed: 2015-09-30
Assignee
INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
28333 TELEGRAPH ROAD, SOUTHFIELD, MICHIGAN, VIRGINIA, 48034
Covered Properties
(249)
Sunvisor Spring Clip and Attachment Mechanism
Patent:
5,139,303 →
Application:
07/730,700 →
Vehicular Sun Visor Assembly
Patent:
5,205,639 →
Application:
07/733,298 →
Self-Mounting Automobile Dome Lamp Assembly
Patent:
5,239,449 →
Application:
07/734,845 →
Method of Ultrasonically Bonding Thermoplastic to Fibers
Patent:
5,269,860 →
Application:
07/786,268 →
Method for Formjing Plastic Molded Panels with Inserts
Patent:
5,340,425 →
Application:
07/798,576 →
Automobile Sun Visor Vanity Mirror Module
Patent:
5,278,736 →
Application:
07/839,423 →
Vehicle Console with Positive Push-Push Door Latch
Patent:
5,267,761 →
Application:
07/846,543 →
Apparatus for Securing Fabric to a Visor
Patent:
5,338,082 →
Application:
07/869,462 →
Floor Mat and Method of Making Same
Patent:
5,362,544 →
Application:
07/872,456 →
Method for Forming Plastic Molded Panels with Inserts
Patent:
5,411,688 →
Application:
07/905,799 →
Stowaway Armrest
Patent:
5,290,092 →
Application:
07/965,815 →
Visor Detent Spring Clip
Patent:
5,338,083 →
Application:
08/009,548 →
Floor Mat for an Overland Vehicle
Patent:
5,439,725 →
Application:
08/049,848 →
Power Pack for an Automotive Exterior Mirror Assembly
Patent:
5,363,246 →
Application:
08/060,268 →
Method for Molding a Trim Panel with Integrally Formed Simulated Leather Appliques
Patent:
5,439,630 →
Application:
08/114,928 →
Method of Producing Stratiform Articles and Products
Patent:
6,165,404 →
Application:
08/133,283 →
Interior Lamp for an Automotive Vehicle
Patent:
5,357,408 →
Application:
08/134,095 →
Sun Visor System
Patent:
5,417,466 →
Application:
08/147,730 →
Variable Density Motor Vehicles Carpet
Patent:
5,474,829 →
Application:
08/185,397 →
Mounting Bracket for a Sun Visor
Patent:
5,451,022 →
Application:
08/199,824 →
Viscoelastic Damping Foam Having an Adhesive Surface
Patent:
6,420,447 →
Application:
08/204,162 →
Decorative Panels for Automobile Interiors
Patent:
5,462,786 →
Application:
08/212,399 →
Method for Forming Plastic Molded Panels Having an Undercut Edge
Patent:
6,726,872 →
Application:
08/225,965 →
Method for Forming Plastic Molded Panels with Inserts
Patent:
5,529,742 →
Application:
08/241,970 →
Method for Binding Tufts
Patent:
5,536,551 →
Application:
08/276,412 →
Method for Making Embossed Laminated Foam Articles
Patent:
5,490,890 →
Application:
08/297,411 →
Method for Electromagnetically Welding Thermoplastic Articles Together
Patent:
5,538,581 →
Application:
08/382,441 →
Molded Plastic Panel Having Intregrated, Localized Soft-Touch Aesthetic Feature
Patent:
5,626,382 →
Application:
08/416,033 →
A Molded Trim Panel with Integrally Formed Simulated Leather Appliques and a Method for Molding Same
Patent:
5,571,597 →
Application:
08/425,880 →
Method of Forming a Variable Density Motor Vehicle Carpet
Patent:
5,605,108 →
Application:
08/529,562 →
Popup a/C Outlet
Patent:
5,752,877 →
Application:
08/608,608 →
Apparatus for Multiple Sheet Line Molding
Patent:
5,843,492 →
Application:
08/661,625 →
Shade Assembly Mount for Vehicle Compartment
Patent:
5,881,793 →
Application:
08/677,815 →
Vehicle Trim Panel with Natural Fiber Layers
Patent:
5,804,262 →
Application:
08/699,108 →
Insert for the Map Pocket of a Motor Vehicle
Patent:
6,116,672 →
Application:
08/799,791 →
Overhead Console with Drop-Down Door
Patent:
6,003,925 →
Application:
08/804,354 →
Blow Molding Process
Patent:
5,885,515 →
Application:
08/812,210 →
Vehicle Instrument Panel with Seamless Airbag Cover
Patent:
5,997,030 →
Application:
08/816,791 →
Visor Torque Control
Patent:
5,924,748 →
Application:
08/837,175 →
Automotive Interior Pull Handle Assembly
Patent:
5,931,525 →
Application:
08/868,592 →
High Modulus and Stiffness Polymer Foam/Gmt Composites
Patent:
5,900,300 →
Application:
08/886,947 →
Sun Visor
Patent:
5,887,933 →
Application:
08/893,169 →
Garage Door Opener Bin
Patent:
5,887,929 →
Application:
08/896,043 →
Grip Handle Assembly and Method of Assembling Same
Patent:
5,975,606 →
Application:
08/920,590 →
Method for Forming Plastic Molded Panels with Inserts
Patent:
5,824,251 →
Application:
08/923,102 →
Vehicle Spare Tire Storage System Having a Reinforced Cover
Patent:
5,971,462 →
Application:
08/939,024 →
Recycling of Carpet Scrap
Patent:
5,859,071 →
Application:
08/998,953 →
Vehicle Trim Panel with Natural Fiber Layers
Patent:
5,976,646 →
Application:
09/032,675 →
Instrument Panel Seamless Airbag Cover
Patent:
6,089,642 →
Application:
09/036,762 →
Modular Wire Harness and Carpet for Vehicle
Patent:
5,965,951 →
Application:
09/037,596 →
Method for Molding Headliners
Patent:
6,146,578 →
Application:
09/048,496 →
Vehicle Load Floor and Method of Making Same
Patent:
6,136,259 →
Application:
09/111,913 →
Recycling Trim Components for Vehicles
Patent:
6,110,580 →
Application:
09/130,173 →
Sound-Dampened Automobile Interior Components and Methods for Making Same
Patent:
6,112,848 →
Application:
09/159,157 →
Method of Making a Floor Mat Having a Channel
Patent:
36,677 →
Application:
09/163,995 →
Pleated Nonwoven Products and Methods of Constructing Such Products
Patent:
6,534,145 →
Application:
09/181,404 →
Vehicle Spare Tire Storage System
Patent:
6,033,003 →
Application:
09/201,971 →
Air Outlet Assembly Having Controllable Effort Generation
Patent:
6,059,653 →
Application:
09/221,512 →
Method for Forming Headliners
Vehicle Door Assembly with a Trim Panel Forming a Structural Door Module Component Carrier
Patent:
6,546,674 →
Application:
09/288,602 →
Vehicle Visor Having Snap-in Support Pin
Patent:
6,120,086 →
Application:
09/300,192 →
Recycling of Carpet Scrap and Compositions Employing Ultralow Density Polyethylene (Uldpe)
Patent:
6,241,168 →
Application:
09/329,607 →
Insertable Vehicle Floor Drain
Patent:
6,290,279 →
Application:
09/344,512 →
Throw-In Mat for a Vehicle Floor
Patent:
6,340,513 →
Application:
09/444,164 →
Tool Retaining Vehicle Spare Tire Storage System
Method of Recycling Scrap Material Containing a Thermoplastic
Patent:
6,576,176 →
Application:
09/526,974 →
Energy Absorbing Bracket Assembly for Vehicle Knee Bolster
Patent:
6,491,322 →
Application:
09/531,738 →
Apparatus for molding articles
Patent:
6,338,618 →
Application:
09/551,789 →
Protective Device for Side-on Collisions
Patent:
6,443,485 →
Application:
09/554,936 →
Method of making a sunroof sunshade
Patent:
6,295,711 →
Application:
09/597,867 →
Dual Stage Fastener
Patent:
6,431,585 →
Application:
09/679,755 →
Modular Vehicle Door and Method of Assembly
Crash Box Component Holder
Patent:
6,422,644 →
Application:
09/786,406 →
Molded Acoustic and Decorative Mats and Methods for Forming the Same
Patent:
6,382,350 →
Application:
09/824,540 →
Casing Module Comprising an Airbag
Patent:
6,502,855 →
Application:
09/868,794 →
Sound Attenuating Material for Use Within Vehicles and Methods of Making Same
Method of Making a Vehicle Floor Covering with Integral Threaded Drain Tube
Method and Apparatus for Molding a Soft Trim Component Onto a Substrate
Multi-Density Sound Attenuating Laminates and Methods of Making Same
Sound Attenuating Composite Articles Incorporating Scrim Material and Methods of Making Same
Visor Assembly with Extender Blade
Modular Overhead Console Assembly
Floor Mats Having Peripheral Apertures with Acoustic Absorbing Material
Patent:
6,595,321 →
Application:
10/109,501 →
Spray Urethane Tool and System
Modular Headliner Assembly with Air Curtains
Lightweight Acoustical System
Patent:
39,010 →
Application:
10/171,181 →
Blow Molded Multiple Function Assemblies for Vehicle Headliners
Climate Control System Outlet
Patent:
6,685,555 →
Application:
10/241,098 →
Method for Making Vehicle Door
Pneumatic Pressure Molded Impact Countermeasure
Patent:
6,698,819 →
Application:
10/248,013 →
Carpet Molding Process
Door Module Water Shield
Patent:
6,767,049 →
Application:
10/248,995 →
Plastic Injection Molded Articles with Hollow Rib Members
Overhead Console Active Night Vision System for an Interior Cabin of a Vehicle
Patent:
6,795,237 →
Application:
10/250,071 →
Open Mold Molding
Multiple Cavity Gas Assisted Plastic Injection Molding
Patent:
6,787,097 →
Application:
10/250,281 →
Plastic Injection Molding with Moveable Insert Members
Porous Carpeting for Vehicles and Methods of Producing Same
Trim Component with Mounted Light Source for Indirectly Lighting the Interior of a Vehicle
Hybrid Vehicle Interior Component
Vehicle Carpet System with Floor Mat Retention Apparatus
Vehicle Headliner
Interior Attachment Apparatus and Method for a Vehicle Component
Method for Injection Molding of Plastic Materials Using Gas Holding Pressure in Mold
Modular Vehicle Door Assembly
Foam in Place Urethane for Structural Headliners
Integrated Door Module
Slidable Sun Visor Assembly
Method of Forming a Vehicle Component
Method of Forming a Vehicle Panel Assembly
Modular Overhead Console Assembly
Apparatus and Methods of Forming Sound Attenuating Laminates Having Fiber and Mass Layers
Vehicle Floor Coverings and Methods of Making Same
Method of Forming a Vehicle Trim Panel
Method of molding a vehicle trim component
Application:
10/394,130 →
Publication:
US 2004/0056382
Injection Molding System Having a Removable in-Mold Degating Insert
Method of Making an Interior Trim Part
Foam in Place Composite One-Piece Hard/Soft Panel
Fluid Delivery System for Spray Applicator
Plastic Skin Forming Process
Adhesive Precoated Headliner Materials
Air Duct Outlet with Single Vane Air Stream Direction Control
Sound Absorptive Multilayer Articles and Methods of Producing Same
Method for Making an Automotive Punched Headliner
Multi-Shot Molding Method and Assembly
Plastic Skin Forming Process
Air Duct Outlets with Manual and Automatic Air Stream Direction Control
Thermally Controlled Storage Space System for an Interior Cabin of a Vehicle
Low Pressure Laminate Gas Assist Molding
Automotive Interior Trim Component with Soft Feel
Automotive Instrument Panel
Automotive Interior Trim Assembly and Pad Insertion
Door Trim Panel with Dual Density Bolster Armrest and Integrated Components
Vehicle Trim Panel with Integral Nibbed Armrest
Radio Bin Spacer
Automotive Hardware Carrier and Method of Making Same
Guiding Pillar Trim for a Side-Curtain Airbag System
G-Force Push-Push Latch
Method of Manufacturing an Airbag Assembly and Vehicle Trim Component
Trim Panel Having Foam Bridge Supported Hidden Tear Seam
Instrument-Panel Mounting System
Composite Shoddy and Method of Manufacturing Same
Sonic Weld Sunroof Trim Ring
Overhead Console for a Vehicle
Patent:
40,617 →
Application:
10/758,563 →
100% Grained with Non-Shut-Off Condition Two Shot Interior Component
Load Bearing Vehicle Floor Mats
Armrest Having Armrest Bun and Method of Manufacture
Two-Shot Polymeric Component with Attachment Feature and Method of Producing Same
Method of Forming a Vehicle Component
Method of Forming a Vehicle Component
Lightweight Acoustic Automotive Carpet
Sound Absorbing/Sound Blocking Automotive Trim Products
Trim Panel Assembly Having an Integrated Door Bumper and Method of Manufacture
Patent:
6,945,583 →
Application:
10/852,276 →
Method of Over-Molding Tpe Components Using Zero Gate
Method of Forming a Vehicle Component
Porous Carpeting for Vehicles and Methods of Producing Same
Automotive Trim Part with Applique and Method of Making Same
Automotive Armrest with Soft Feel and Method of Making the Same
Automotive Handle with Soft Feel and Method of Making the Same
Automotive Trim Assembly Having an Integrated Airbag Door
Low-Friction Sleeve Insert for a Visor Bearing
Process Control for Gas-Assisted Injection Molding Applications
Vehicle Door Trim Bolster with Multi-Feel Cover and Method of Making the Same
Acoustic Insulator with Controlled Airflow Resistance and Method of Making Same
Adjustable Beam Lamp
Configurable Panel for Vehicle Overhead Console
Patent:
7,032,945 →
Application:
10/904,790 →
Automotive Open Base Foam Armrest Assembly
Integrated Center Stack for a Motor Vehicle
Integral Doghouse Fastener with Retaining Feature
Structural Rail System for Supporting an Overhead Console
Invertible Storage Compartment Divider
Modular Trim Assembly with Air Curtain for a Motor Vehicle
Method of Making an Integrated Door Inner Panel and an Article Made Thereby
Multi-Density Sound Attenuating Laminates and Methods of Making Same
Vehicle Floor Mats Having Integral Hook Retention
Interior Lining Part
Console Latch Assembly
Apparatus for Molding a Trim Panel Assembly Having a Narrow Transition Radius
Console and Object Holder Assembly for a Vehicle
Storage Pocket Assembly for a Vehicle Door Trim Panel
Patent:
6,971,698 →
Application:
11/053,963 →
A Trim Panel and a Method of Manufacture
Trim Panel with Edge Seal
Console Assembly for a Vehicle
Foam in Place Composite One-Piece Hard/Soft Panel
Nesting Console System
Critical Seam Alignment of Soft Trim to Automobile Components
Plastic Bracket Countermeasure for Door Side Impact
Snap-In Decorative Articles for Vehicle Interiors
Methods of Forming Vehicle Interior Components Which Include a Decoupler Layer
Random Incident Absorber Approximation
Removable Storage Module for Vehicle
Console Assembly for a Vehicle
Removable in-Mold Degating Insert
Tunable Geometry for Energy Absorbing Foam to Lower Peak Load During Side Impact
Vehicle Cup Holder with Improved Support Member
Upper Glove Box Latch Housing Knee Impact Protector
A Pocketed Panel Assembly
Automotive Interior Trim
Application:
11/423,981 →
Publication:
US 2006/0214462
System for Attaching an Article Holding Assembly to a Mounting Member in a Vehicle
Trim Panel Having Foam Bridge Supported Hidden Tear Seam
Console Assembly for a Vehicle
In Mold Lamination of Decorative Products
Airbag Assembly
Hollow Structural Member with Reinforced Bulwark and Process for Producing Same
Lightweight Acoustic Automotive Carpet
Method of forming a vehicle trim component
Application:
11/525,444 →
Publication:
US 2008/0073807
Sound Absorbing/Sound Blocking Automotive Trim Products
Slidable Floor Console
Trim System for a Vehicle Door
Airbag Assembly with Angled Keyway
Patent:
7,234,724 →
Application:
11/535,121 →
Airbag Assembly
Illuminated Visor Vanity
System to Establish a Trim Edge for a Vehicle Roof Window
Console Assembly for a Vehicle
Integrated Center Stack for a Motor Vehicle
Method of Making an Interior Panel for a Door and an Article Made Thereby
Method of Sewing a Decorative Seam and Trim Component Made by That Method
Floor Mat Having a Retention Feature
Modified Slush Moldable Tpu for Instrument Panels with Seamless Airbag Deployment Capability
Vehicle Console
Method of Making a Trim Panel Having a Narrow Transition Radius and Apparatus
Three Piece Floor Mat Retention System
Application:
12/271,148 →
Publication:
US 2010/0122429
Air Duct Outlet
Application:
12/274,712 →
Publication:
US 2010/0124876
Interior Panel Component for Use with a Vehicle and Method for Making
Application:
12/336,916 →
Publication:
US 2010/0151227
In-Mold Lamination of Decorative Products
Air Vent Providing Diffusion
Illuminated Visor Vanity
Application:
12/399,339 →
Publication:
US 2010/0225248
Integration of Light Emitting Devices and Printed Electronics into Vehicle Trim Components
Modified Moldable Urethane with Tunable Haptics
Deck Seam with Reduced Selvage
Selectively Illuminated Trim Panels
Application:
12/497,445 →
Publication:
US 2011/0002138
Luminous Interior Trim Material
Decorative Products Having Depth of Image
Application:
12/523,582 →
Publication:
US 2010/0167026
In Mold Lamination of Decorative Products
In Mold Lamination of Decorative Products
Energy Absorbing Countermeasure
Vehicle Floor Mat with Folding Portion
Application:
12/695,923 →
Publication:
US 2011/0062742
In Mold Lamination of Decorative Products
Plastic Bracket Countermeasure for Door Side Impact
Armrest Foam Bun Insert
Gap Hider for Assist Grip
Application:
12/786,976 →
Publication:
US 2011/0291435
Energy Absorber for Vehicle Overhead System
Energy Absorber for Vehicle Bumper
Air Outlet For Vehicle Applications
Application:
12/948,243 →
Publication:
US 2012/0122387
Vehicle Rail Module Exterior Surface Incorporating a Handle Coathook and Lamp
Patent:
400,839 →
Application:
29/057,275 →
Removable Storage Container for Motor Vehicle
Patent:
393,623 →
Application:
29/066,605 →
Storage Container for Motor Vehicles
Patent:
391,223 →
Application:
29/066,906 →
Vehicular Coat Hook Assembly
Patent:
403,998 →
Application:
29/071,095 →
Icon for Vehicle Speedometer Display
Patent:
422,545 →
Application:
29/081,009 →
Related Assignments
(13)
Other recorded transfers of the patents in this record — the chain of ownership.
Security Interest
Sep 30, 2015
From: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC., AS GRANTOR
To: CF LENDING, LLC , AS ADMINISTRATIVE AGENT
Reel/Frame 036722/0294 →
Security Interest
Sep 30, 2015
From: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC., AS GRANTOR
To: CF LENDING, LLC , AS ADMINISTRATIVE AGENT
Reel/Frame 036722/0440 →
Security Agreement
Oct 1, 2015
From: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
To: THE BANK OF NEW YORK MELLON, AS COLLATERAL AGENT
Reel/Frame 036742/0576 →
Release of Security Interest
Oct 5, 2015
From: GENERAL ELECTRIC CAPITAL CORPORATION, AS COLLATERAL AGENT
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
Reel/Frame 036777/0904 →
Release of Security Interest
Feb 4, 2016
From: JPMORGAN CHASE BANK, N.A., AS AGENT
To: LEAR CORPORATION EEDS AND INTERIORS
Reel/Frame 037670/0270 →
Release of Security Interest
Feb 5, 2016
From: JPMORGAN CHASE BANK, N.A., AS AGENT
To: LEAR CORPORATION
Reel/Frame 037731/0918 →
Assignment of Assignor's Interest
Nov 22, 2016
From: STANKIEWICZ GMBH
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP GMBH
Reel/Frame 040398/0351 →
Release of Security Interest
Oct 2, 2017
From: THE BANK OF NEW YORK MELLON
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
Reel/Frame 043754/0606 →
Release of Security Interest
Nov 3, 2017
From: WELLS FARGO BANK, NATIONAL ASSOCIATION
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
Reel/Frame 044028/0309 →
Release of Security Interest
Nov 3, 2017
From: WELLS FARGO BANK, NATIONAL ASSOCIATION
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
Reel/Frame 044027/0776 →
Assignment of Assignor's Interest
Mar 15, 2018
From: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP GMBH
To: AURIA SOLUTIONS UK I LTD.
Reel/Frame 045221/0913 →
Release of Security Interest in Patents at Reel 036742/Frame 0576
Apr 26, 2018
From: THE BANK OF NEW YORK MELLON, AS COLLATERAL AGENT
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
Reel/Frame 046022/0599 →
Termination and Release of Intellectual Property Security Agreements
Jun 26, 2024
From: WELLS FARGO BANK, N.A.
To: INTERNATIONAL AUTOMOTIVE COMPONENTS GROUP NORTH AMERICA, INC.
Reel/Frame 067853/0742 →