Patent Assignment
Reel/Frame 060158/0981
Change of Name
Recorded: 2022-05-23
Pages: 8
Assignor
DELAVAN INC
Executed: 2022-01-06
Assignee
COLLINS ENGINE NOZZLES, INC.
811 4TH STREET, P.O. BOX 65100, DES MOINES, IOWA, 50265
Covered Properties
(167)
Conical Swirler for Fuel Injectors and Combustor Domes and Methods of Manufacturing the Same
Alignment and Positioning System for Installing a Fuel Injector in a Gas Turbine Engine
Integrated Fuel Injection and Mixing Systems for Fuel Reformers and Methods of Using the Same
Dynamic Sealing Assembly to Accommodate Differential Thermal Growth of Fuel Injector Components
Air Assisted Simplex Fuel Nozzle
Pure Air Blast Fuel Injector
Feed Arm for a Multiple Circuit Fuel Injector
Apparatus for Discouraging Fuel from Entering the Heat Shield Air Cavity of a Fuel Injector
Multi-Stage Check Valve
Fuel Distribution Manifold System for Gas Turbine Engines
Thermal Management for Fuel Injectors
Methods and Systems for Modulating Fuel Flow for Gas Turbine Engines
Flameless combustion systems for gas turbine engines
Multi-Point Injector Ring
System and Method for Locking Retention of Valve Components
Fluid Divider Valves
Patent:
8,469,059 →
Application:
12/561,722 →
Trim Valves for Modulating Fluid Flow
Flexure Seal for Fuel Injection Nozzle
Mixers for Immiscible Fluids
High Temperature Manifolds for Gas Turbine Engines
Flexible fluid conduit
Low Calorific Value Fuel Combustion Systems for Gas Turbine Engines
Flat Fan Air Assist Injectors
Recirculating Product Injection Nozzle
Compact High Flow Pressure Atomizers
Carbon Contamination Resistant Pressure Atomizing Nozzles
Machined Springs for Injector Applications
Thermal Management for Fuel Injectors
Single Circuit Multiple Spray Cone Pressure Atomizers
Methods of Fabricating Fuel Injectors Using Laser Additive Deposition
Active Purge Mechanism with Backflow Preventer for Gas Turbine Fuel Injectors
Impulse Duty Cycle Valves
Conical Swirler for Fuel Injectors and Combustor Domes and Methods of Manufacturing the Same
Multipoint Injectors with Auxiliary Stage
Radial Vane Inner Air Swirlers
Multipoint Fuel Injection Arrangements
Injectors for Multipoint Injection
Flow Through Cylindrical Bores
Variable Angle Multi-Point Injection
Multipoint Injectors
Fuel Nozzle with Discrete Jet Inner Air Swirler
Air Swirlers
Dynamic Valve Seal Arrangement
High Temperature Fuel Manifold for Gas Turbine Engines
Tube Strain Relievers
Sealing Device
Continuous Ignition
Continuous Ignition Systems
Integrated Heat Shield
Carbon Contamination Resistant Pressure Atomizing Nozzles
Particulates for Additive Manufacturing Techniques
Dynamic Valve Seal Having Retaining Features
Flexible Swirlers
Fuel Injectors for Gas Turbine Engines
Air Shrouds with Air Wipes
Systems and Methods for Radiographic Inspection
Fuel Nozzles
Fuel Nozzles
Air Shrouds with Improved Air Wiping
Method for Manufacturing a Hybrid Heat Exchanger
Combustion Systems
Cooling in Staged Fuel Systems
Flow Devices and Methods of Making the Same
Braze Joints
Combustion Systems
Support Structures for Additive Manufacturing Techniques
Multi-Fluid Nozzles
Systems and Methods for Post Additive Manufacturing Processing
Fuel Staging
Systems for Quality Monitoring of Additive Manufacturing
Image Conduit for Fuel Nozzle Assemblies
Particulates for Additive Manufacturing Techniques
Fluid Valves
Injectors for Multipoint Injection
Air Entrance Effect
Feedstock and Methods of Making Feedstock for Cold Spray Techniques
Airblast Injectors
Additive Manufacture of Electrically Conductive Materials
Thermal Management for Injectors
Powder Removal Systems
Injector Fittings
Impulse Duty Cycle Valves
Strainers
Swirlers
Atomizers
Smoke and Soot Removal Systems for Additive Manufacturing
Additive Manufacturing Build Plates and Handling
Brazing Components and Techniques
Additive Manufacturing Processing with Oxidation
Powder Container Systems for Additive Manufacturing
Prevention of Deposits on Engine Components
Filter Screens and Methods of Making Filter Screens
Resonant Modes in Sprays
3D Scanning Systems
Nozzles with Internal Manifolding
Fuel Stabilization Systems
Staged Radial Air Swirler with Radial Liquid Fuel Distributor
Dual Fuel Radial Flow Nozzles
Staged Dual Fuel Radial Nozzle with Radial Liquid Fuel Distributor
Fuel Quality Monitoring Systems
Internal Fuel Manifolds
In-Situ Stress Control in Structures
Combustion Liners and Attachments for Attaching to Nozzles
Fuel Injectors for Multipoint Arrays
Pulsed Spraybar Injector
Bearing, Unit for Converting a Flat Substrate, and Methods for Mounting and Removing a Rotary Tool
Recoater Cleaning System
Deposition of Braze Preform
Fluid Spray Injectors
Fuel Injectors and Methods of Making Fuel Injectors
Fuel Nozzles
Variable Angle Multi-Point Injection
Heat Transfer Arrangements and Methods of Making Heat Transfer Arrangements
Dynamic Valve Seal Having Retaining Features
Fuel Manifold with Nested Annular Passages and Radially Extending Channels
Transfer Tube Assembly of Nested Tubes and a Connecting Segment having Parallel and Offset Bores
Electronic Fuel Control for Gas Turbine Engines
Combustor with an Air Mixer and an Air Swirler each having Slots
Flange Bending Support
Fuel Injectors and Methods of Making Fuel Injectors
Directionally Biased Valve
Methods, Systems, and Apparatuses for Improving Surface Finish of Additively Manufactured Parts
Feedstock and Methods of Making Feedstock for Cold Spray Techniques
Fuel Injector Assemblies
Fuel Injector Systems and Support Structures
Discrete Lot Powder Management for Additive Manufacturing
Systems and Methods for Radiographic Inspection
Fuel Injectors Including Gas Fuel Injection
Flexible Swirlers
Fixtures for Additively Manufactured Workpieces
Flow Through Cylindrical Bores
Combustion Systems Having Bayonet Features
Fuel Nozzle Manifold Systems for Turbomachines
Fuel Injectors for Turbomachines
Fuel Injectors for Turbomachines Having Inner Air Swirling
Fuel Injectors Having Air Sealing Structures
Image Conduit for Fuel Nozzle Assemblies
Support Structures for Additive Manufacturing Techniques
Flow Devices and Methods of Making the Same
Reducing Scatter for Computed Tomography
Cooling in Staged Fuel Systems
Torsion Testing Machine and Methods for Additive Builds
Torsion Testing Machine and Methods for Additive Builds
Internal Manifold for Multipoint Injection
Internal Manifold for Multipoint Injection
Additive Manufacturing Build Plates and Handling
Fuel Injectors for Exhaust Heaters
Multipoint Fuel Injection for Radial in-Flow Swirl Premix Gas Fuel Injectors
Heat Shielding for Internal Fuel Manifolds
Plate Swirler with Converging Swirl Passages
Stackable Air Swirlers
Patent:
10,557,630 →
Application:
16/248,137 →
Powder Removal Systems
Brazing Components and Techniques
Recoaters with Gas Flow Management
Multi-Fluid Nozzles
Mixing Nozzles
Fluid-Gas Mixer
Fluid Injectors for Hot Flow
Fuel Nozzles
Fuel Manifolds
Sectional Fuel Manifolds
Smoke and Soot Removal Systems for Additive Manufacturing
Fluid Nozzles with Heat Shielding
Internal Fuel Manifolds
Additive Manufacturing Build Plates and Handling
Fluid Valves
Internal Fuel/Air Heat Exchangers
Related Assignments
(18)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignor's Interest
Jun 9, 2004
From: MAO, CHIEN-PEI; SHORT, JOHN
To: DELAVAN INC
Reel/Frame 015456/0861 →
Assignment of Assignor's Interest
Mar 22, 2005
From: BLEEKER, DANIEL E.
To: DELAVAN INC.
Reel/Frame 016403/0001 →
Assignment of Assignor's Interest
Aug 8, 2005
From: MAO, CHIEN-PEI; SHORT, JOHN
To: DELAVAN INC.
Reel/Frame 016864/0804 →
Assignment of Assignor's Interest
Dec 18, 2006
From: HAGGERTY, DANIEL; HALL, TROY
To: DELAVAN INC
Reel/Frame 018709/0840 →
Assignment of Assignor's Interest
Mar 17, 2008
From: BRETZ, DAVID H.
To: DELAVAN INC
Reel/Frame 020676/0832 →
Assignment of Assignor's Interest
Mar 20, 2008
From: WILLIAMS, BRANDON P
To: DELAVAN INC
Reel/Frame 020680/0926 →
Assignment of Assignor's Interest
Apr 16, 2008
From: CHEW, GARY W.; CHOLVIBUL, VIRAPHAND
To: DELAVAN INC.
Reel/Frame 020814/0882 →
Assignment of Assignor's Interest
Jul 24, 2008
From: HALL, TROY
To: DELAVAN INC.
Reel/Frame 021296/0964 →
Assignment of Assignor's Interest
Aug 28, 2008
From: HAGGERTY, DANIEL T.
To: DELAVAN INC
Reel/Frame 021514/0872 →
Assignment of Assignor's Interest
Oct 17, 2008
From: WILLIAMS, BRANDON P.; JAMES, NATHAN J.
To: DELAVAN INC
Reel/Frame 021698/0661 →
Assignment of Assignor's Interest
Feb 4, 2009
From: GOEKE, JERRY L.; THOMSON, NEAL A.; WILLIAMS, BRANDON P.
To: DELAVAN INC
Reel/Frame 022208/0138 →
Assignment of Assignor's Interest
Feb 10, 2009
From: GOEKE, JERRY L; WILLIAMS, BRANDON P
To: DELAVAN INC
Reel/Frame 022234/0674 →
Assignment of Assignor's Interest
May 13, 2009
From: CORNWELL, MICHAEL D.; OVERMAN, NICHOLAS R.; GUTMARK, EPHRAIM
To: DELAVAN INC
Reel/Frame 022731/0159 →
Assignment of Assignor's Interest
Aug 12, 2009
From: SHORT, JOHN E.
To: DELAVAN INC
Reel/Frame 023091/0374 →
Assignment of Assignor's Interest
Sep 8, 2009
From: CANNY, JOHN DAVID; DEATON, STEVEN SCOTT
To: DELAVAN INC
Reel/Frame 023202/0497 →
Assignment of Assignor's Interest
Oct 5, 2009
From: FORST, MICHAEL J.
To: DELAVAN INC
Reel/Frame 023325/0123 →
Assignment of Assignor's Interest
Dec 21, 2009
From: BAXTER, RANDY C.; GOEKE, JERRY L.
To: DELAVAN INC
Reel/Frame 023682/0288 →
Assignment of Assignor's Interest
Dec 18, 2017
From: PROCIW, LEV ALEXANDER; RYON, JASON A.; GREENFIELD, JACOB
To: DELAVAN, INC.
Reel/Frame 044425/0548 →