IP Library Assignment 032826/0684
Patent Assignment
Reel/Frame 032826/0684

Release of Security Interest

Recorded: 2014-05-05 Received: 2014-05-05 Pages: 23
Assignor
Assignee
POWER-ONE, INC.
740 CALLE PLANO, CAMARILLO, CA, 93012, UNITED STATES
Covered Properties (100)
Hardware Virtualization System
Application: 13/060,946 →
Multi-Phase Resonant Converter with Trimmable Inductor and Phase Current Balancing Method
Application: 61/448,856 →
Digital Phase Adjustment Method for Multi-Phase Power Converters
Application: 61/441,486 →
Digital Phase Adjustment Method for Multi-Phase Power Converters
Application: 61/441,490 →
Antivibration Fan Control for Modular Power Supplies Used in Vibration Sensitive Applications
Application: 61/421,402 →
Isolation System for a Bi-Directional Communication Bus Line
Application: 12/957,162 →
Method for Assigning Addresses to a Plurality of Electronic Devices Connected to a Communication Channel
Application: 12/812,835 →
Power Supply Architecture for Controlling and Monitoring Isolated Output Modules
Application: 12/905,693 →
Modular Power Supply Interconnection System with Pluggable Interface
Application: 12/905,707 →
System and Method for Zero Volt Switching of Half Bridge Converters During Startup and Short Circuit Conditions
Application: 12/905,699 →
Delivery of Electric Power by Means of a Plurality of Parallel Inverters and Control Method Based on Maximum Power Point Tracking
Application: 12/663,499 →
Single Stage Micro-Inverter with H-Bridge Topology Combining Flyback and Forward Operating Modes
Application: 12/817,726 →
Magnetic Component with Bobbinless Winding
Application: 12/780,498 →
Isolation System for a Bi-Directional Communication Bus Line
Application: 61/329,889 →
Method and Apparatus for Reprogramming Applications in Embedded Devices
Application: 12/754,380 →
Magnetic Component with Bobbinless Winding
Application: 61/312,556 →
Ac/Dc Power Converter with Active Rectification and Input Current Shaping
Application: 12/707,775 →
Ac/Dc Power Converter with Active Rectification and Input Current Shaping
Application: 61/299,388 →
Single Secondary Rectification Multi-Outputs Flyback Converter Adapted to Minimize the Number of Components
Application: 12/451,682 →
Zero Voltage Switching of Half Bridge Converter During Start-Up and Short Circuit Conditions
Application: 61/252,072 →
State of the Art Power Supply Architecture
Application: 61/252,067 →
Connector Interface in a Modular Product
Application: 61/252,070 →
Circuit for Controlling Synchronous Rectifiers During Start-Up into Pre-Biased Output Voltage
Application: 12/500,741 →
Circuit for Controlling Synchronous Rectifiers During the Start-Up into Prebiased Output Voltage
Application: 61/087,502 →
Systems and Methods for Distributed Asset Management Having Tagging Capabilities
Application: 12/173,727 →
Isolated Current to Voltage, Voltage to Voltage Converter
Application: 12/115,452 →
Method and System for Controlling and Monitoring an Array of Point-of-Load Regulators
Application: 11/946,809 →
System and Method for Managing Fault in a Power System
Application: 11/930,107 →
Digital Power Manager for Controlling and Monitoring an Array of Point-of-Load Regulators
Application: 11/932,796 →
System and Method for Managing Fault in a Power System
Application: 11/930,065 →
System and Method for Interleaving Point-of-Load Regulators
Application: 11/927,682 →
System for Controlling an Array of Point-of-Load Regulators and Auxiliary Devices
Application: 11/930,049 →
Self Tracking Adc for Digital Power Supply Control Systems
Application: 11/876,756 →
Computer Implemented Systems and Methods for Pre-Emptive Service and Improved Use of Service Resources
Application: 11/919,041 →
Computer implemented systems and methods for improving renewable energy systems performance guarantees
Application: 11/919,016 →
Method and System for Optimizing Filter Compensation Coefficients for a Digital Power Control System
Application: 11/781,878 →
Method and System for Communicating Filter Compensation Coefficients for a Digital Power Control System
Application: 11/778,647 →
Method and System for Controlling and Monitoring an Array of Point-of-Load Regulators
Application: 11/696,449 →
Method and System for Controlling and Monitoring an Array of Point-of-Load Regulators
Application: 11/696,422 →
Digital Double-Loop Output Voltage Regulation
Application: 11/671,889 →
Self Driven Synchronous Rectifier Shutdown Circuit and Method
Application: 11/614,908 →
Digital Double-Loop Output Voltage Regulation
Application: 11/605,045 →
Method and System for Controlling a Mixed Array of Point-of-Load Regulators Through a Bus Translator
Application: 11/558,848 →
Packet Communication Between a Collecting Unit and a Plurality of Control Devices and Over the Power Supply Line
Application: 10/551,592 →
Method and System for Controlling an Array of Point-of-Load Regulators and Auxiliary Devices
Application: 11/354,550 →
Method and Device for the Control of a Three-Phase Inverter
Application: 11/349,620 →
Adc Transfer Function Providing Improved Dynamic Regulation in a Switched Mode Power Supply
Application: 11/349,853 →
System and Method for Providing Digital Pulse Width Modulation
Application: 11/326,813 →
Voltage Set Point Control Scheme
Application: 11/281,973 →
Method for Fabrication Semiconductor Device
Application: 10/531,700 →
System and Method for Controlling Output-Timing Parameters of Power Converters
Application: 11/264,057 →
Electronic Circuit Breaker
Application: 11/226,477 →
Ac Coupled Bias Circuit for Power Converters
Application: 11/198,601 →
Anti-Islanding Method and System for Distributed Power Generation Systems
Application: 11/197,128 →
System and Method for Providing Digital Pulse Width Modulation
Application: 11/187,182 →
Dynamic Control of Power Converter Output Voltage Slew Rate
Application: 11/174,811 →
System for Controlling and Monitoring an Array of Point-of-Load Regulators by a Host
Application: 11/165,798 →
Bi-Directional Mos Current Sense Circuit
Application: 11/126,429 →
System and Method for Controlling a Point-of-Load Regulator
Application: 11/117,188 →
System and Method for Controlling Output-Timing Parameters of Power Converters
Application: 11/103,835 →
Digital Pulse Width Modulation Controller with Preset Filter Coefficients
Application: 11/099,391 →
Digital Output Voltage Regulation Circuit Having First Control Loop for High Speed and Second Control Loop for High Accuracy
Application: 11/084,766 →
Electronic Circuit Breaker
Application: 11/055,531 →
Compensated Droop Method for Paralleling of Power Supplies (C-Droop Method)
Application: 11/049,909 →
Digital Power Manager for Controlling and Monitoring an Array of Point-of-Load Regulators
Application: 11/048,014 →
Integral Molded Heat Sinks on Dc-Dc Converters and Power Supplies
Application: 11/044,870 →
System and Method for Providing Digital Pulse Width Modulation
Application: 10/986,607 →
Enhanced Connection Arrangement for Co-Planar Vertical Surface Mounting of Subassemblies on a Mother Board
Application: 10/972,488 →
Power Supply Packaging System
Application: 10/925,792 →
Arch Member for an Orthodontic Brace
Application: 10/865,148 →
Primary Side Turn-Off of Self-Driven Synchronous Rectifiers
Application: 10/843,406 →
Vertical Power Jfet with Low on-Resistance for High Voltage Applications
Application: 10/828,773 →
Lighting Installation with Regulation of Light Emission Devices
Application: 10/824,770 →
Adc Transfer Function Providing Improved Dynamic Regulation in a Switched Mode Power Supply
Application: 10/779,475 →
Low Cost Dielectric Isolation Method for Integration of Vertical Power Mosfet and Lateral Driver Devices
Application: 10/767,384 →
Method, System, and Program for Data Corruption Detection and Fault Isolation
Application: 10/752,758 →
Unregulated Dc-Dc Converter Having Synchronous Rectification with Efficient Gate Drives
Application: 10/726,893 →
Adaptive Delay Control Circuit for Switched Mode Power Supply
Application: 10/724,509 →
Arrangement for Surface Mounting of Subassemblies on a Mother Board
Application: 10/715,907 →
Connector for Surface Mounting Subassemblies Vertically on a Mother Board and Assemblies Comprising the Same
Application: 10/715,908 →
Arrangement for Co-Planar Vertical Surface Mounting of Subassemblies on a Mother Board
Application: 10/716,134 →
Dynamic Control of Power Converter Output Voltage Slew Rate
Application: 10/670,050 →
Two-Part Grommet
Application: 10/652,777 →
Isolated Drive Circuitry Used in Switch-Mode Power Converters
Application: 10/648,659 →
Current-Powered Converted with Energy Recovery Clamping Circuit
Application: 10/463,210 →
Electric-Power Supply with Rectifier
Application: 10/462,934 →
Dc/Dc Converter with Filter for Limiting the Oscillation of the Input Current and Associated Method
Application: 10/463,831 →
Housing with Directed-Flow Cooling for Computer
Application: 10/430,156 →
Dc-Dc Converter Implemented in a Land Grid Array Package
Application: 10/423,603 →
Phase-Shifted Resonant Converter Having Reduced Output Ripple
Application: 10/407,047 →
Method and System for Current Sharing Among a Plurality of Power Modules
Application: 10/401,463 →
Power Supply Cut-Off Device for a Power Rectifier
Application: 10/402,690 →
System and Method for Controlling Output-Timing Parameters of Power Converters
Application: 10/388,831 →
Voltage Set Point Control Scheme
Application: 10/388,829 →
Power Supply Packaging System
Application: 10/377,202 →
Digital Signal Processor Architecture Optimized for Controlling Switched Mode Power Supply
Application: 10/361,452 →
Digital Control System and Method for Switched Mode Power Supply
Application: 10/361,667 →
Transistor Driver Circuit
Application: 10/357,313 →
System and Method for Interleaving Point-of-Load Regulators
Application: 10/328,154 →
Method and System for Controlling and Monitoring an Array of Point-of-Load Regulators
Application: 10/326,222 →