Patent Assignment
Reel/Frame 050899/0262
Security Interest
Recorded: 2019-10-31
Pages: 16
Assignor
FUELCELL ENERGY, INC.
Executed: 2019-10-31
Assignee
ORION ENERGY PARTNERS INVESTMENT AGENT, LLC
350 FIFTH AVENUE, SUITE 6740, NEW YORK, NEW YORK, 10118
Covered Properties
(157)
Bipolar Separator Plate with Improved Wet Seals
Patent:
6,372,374 →
Application:
09/451,132 →
High-Efficiency Fuel Cell System
Patent:
6,365,290 →
Application:
09/453,185 →
Retention System for Fuel-Cell Stack Manifolds
Patent:
6,461,756 →
Application:
09/636,452 →
Fuel Cell Stack Compression System
Patent:
6,413,665 →
Application:
09/651,921 →
Ultra-Smooth Dielectric Members for Liquid Electrolyte Fuel Cells
Manifold and Sealing Assembly for Fuel Cell Stack
Sol-Gel Coated Cathode Side Hardware for Carbonate Fuel Cells
Corrugated Current Collector for Direct Internal Reforming Fuel Cells
Anode Support for Carbonate Fuel Cells
Continuous Method for Manufacture of Uniform Size Flake or Powder
Fuel Cell System with Mixer/Eductor
Dual-Porosity Ribbed Fuel Cell Cathode
Flexible Fuel Cell Gas Manifold System
Fuel Cell Stack Compressive Loading System
Fuel Cell End Unit with Integrated Heat Exchanger
Catalyst and/or Electrolyte Loaded Plate and Method of Making Same
Electrolyte Creepage Barrier for Liquid Electrolyte Fuel Cells
Inactive End Cell Assembly for Fuel Cells for Improved Electrolyte Management and Electrical Contact
Compliant Manifold Gasket
High-Capacity Sulfur Adsorbent Bed and Gas Desulfurization Method
Enhanced High Efficiency Fuel Cell/Turbine Power Plant
Molten Carbonate Fuel Cell Cathode with Mixed Oxide Coating
Continuous Method and Apparatus for Manufacture of Uniform Size Flake or Powder
Integrated High Efficiency Fossil Fuel Power Plant/Fuel Cell System with CO2 Emissions Abatement
Cathode Side Hardware for Carbonate Fuel Cells
Regenerative Oxidizer Assembly for Use in Pem Fuel Cell Applications
Modular Fuel-Cell Stack Assembly
Dielectric Frame Assembly and Fuel Cell Manifold
Fuel Cell System Including a Unit for Electrical Isolation of a Fuel Cell Stack from a Manifold Assembly and Method Therefor
In-Situ Removal of Electrolyte from Gas Oxidizer
Manifold Gasket Accommodating Differential Movement of Fuel Cell Stack
High Performance Internal Reforming Unit for High Temperature Fuel Cells
Gas Flow Control Assembly for Use with Fuel Cell Systems Operating on Fuels with Varying Fuel Composition
High-Lithium Electrolyte for Use in Molten Carbonate Fuel Cells and Method for Making Same
Carbonate Fuel Cell and Components Thereof for in-Situ Delayed Addition of Carbonate Electrolyte
Catalyst Assembly for Use in Anode Gas Oxidizing Systems of High Temperature Fuel Cells
Control Assembly for Controlling a Fuel Cell System During Shutdown and Restart
Reforming Catalyst and Method and Apparatus for Making and Loading Same
Fuel Cell Plate Structure Having Baffles in Wet Seal Area
Wet-Seal Caulk for Carbonate Fuel Cell
Fuel Cell System with Fuel Flow Control Assembly Including a Low Flow Bypass
Assembly for and Method of Housing an Object, Such as Fuel Cell Balance of Plant Equipment, for Transport to and Storage at a User Location
Fuel Cell Assembly Using Multiple Fuel Cell Stacks and Control Method Therefor
Fuel cell hybrid power generation system
Fuel Cell End Unit with Integrated Heat Exchanger
Fuel Supply Assembly for Supplying Propane Fuel to a Fuel Cell Assembly and Fuel Cell System Employing Same
Method and System for Recovering High Power Output Operation of High Temperature Fuel Cells Using a Rapid Load Recovery Procedure
Anode for Use in a Fuel Cell and Method for Making Same
Integrated Fuel Cell and Heat Engine Hybrid System for High Efficiency Power Generation
System for Fabricating a Fuel Cell Component for Use with or as Part of a Fuel Cell in a Fuel Cell Stack
On-Line Monitoring Assembly for Detection of Sulfur Breakthrough in a Desulfurizer Assembly and Sulfur Breakthrough Detection Method
Electrode Assembly and Method of Making Same
Flow Control Assembly for Use with Fuel Cell Systems Operating on Fuels with Varying Fuel Composition
Modular Fuel-Cell Stack Assembly
Water recovery assembly for use in high temperature fuel cell systems
Bipolar Separator Plate for Use in a Fuel Cell Assembly and for Preventing Poisoning of Reforming Catalyst
Water Recovery Assembly for Transferring Water from Fuel Cell Cathode Exhaust
Anode with Ceramic Additives for Molten Carbonate Fuel Cell
High-Efficiency Dual-Stack Molten Carbonate Fuel Cell System
Fibrous Ceramic Material and Method for Making the Same
Liquid Metal Heat Exchanger for High Temperature Fuel Cells
Fuel Humidifier Assembly for Use in High Temperature Fuel Cell Systems
Fuel Cell with Electrical Short Circuit Prevention Means
Pre-Processing Assembly for Pre-Processing Fuel Feedstocks for Use in a Fuel Cell System
Fuel Cell Power Production System with an Integrated Hydrogen Utilization Device
Fuel Cell System Manifold Seal
Internally Reforming Fuel Cell Assembly with Staged Fuel Flow and Selective Catalyst Loading for Improved Temperature Uniformity and Efficiency
High Performance Electrolyte for Molten Carbonate Fuel Cells Comprising Carbonate Electrolyte Doped with Additive Material(S) and Lithium Precursor(S)
Sulfur Breakthrough Detection Assembly for Use in a Fuel Utilization System and Sulfur Breakthrough Detection Method
Modular Fuel Cell Stack Assembly Including Anode Gas Oxidizer and Integrated External Manifolds for Use in Fuel Cell Stack Modules
Pre-Processing Assembly for Pre-Processing Fuel Feedstocks for Use in a Fuel Cell System
Manifold Assembly for Controlling Gas Flow and Flow Distribution in a Fuel Cell Stack
Bipolar Separator Assembly for Fuel Cells and Method of Making Same
Method and Manufacturing Assembly for Sintering Fuel Cell Electrodes and Impregnating Porous Electrodes with Electrolyte Powders by Induction Heating for Mass Production
High-Efficiency Dual-Stack Molten Carbonate Fuel Cell System
Fuel Cell Hybrid Power Generation System and Method for Gas Distribution Systems
Electrical Generation System and Method for a Hybrid Fuel Cell Power Plant
Fuel Cell Current Collector with Loading Material Deposited Thereon and Method of Making Same
Flame Stabilized Mixer-Eductor-Oxidizer for High Temperature Fuel Cells
Fuel Cell System Having Biogas Desulfurizer Assembly with Manganese Oxide Desulfurizer Material
Fuel Cell System Manifold Seal
Gasket for Fuel Cell System Manifold Seal
High Temperature Expandable Refractory
Integration of Molten Carbonate Fuel Cells in Cement Processing
Application:
14/207,728 →
Publication:
US 2014/0261090
Title Not Available
Fuel Cell System with Waste Heat Recovery for Production of High Pressure Steam
High-Efficiency Molten Carbonate Fuel Cell System and Method
Power Producing Gas Separation System and Method
High-Efficiency Molten Carbonate Fuel Cell System with Carbon Dioxide Capture Assembly and Method
Fuel Cell System Ride-Through of Electric Grid Disturbances
Flame Stabilized Mixer-Eductor-Oxidizer for High Temperature Fuel Cells
Fuel Cell Assembly
Method of Forming a Bipolar Separator Assembly
Reformer-Electrolyzer-Purifier (Rep) Assembly for Hydrogen Production, Systems Incorporating Same and Method of Producing Hydrogen
Fuel Cell Matrix Composition and Method of Manufacturing Same
Integrated Electrical Power and Chemical Production Using Fuel Cells
Heat Recovery for Saturator Water Recovery of a Direct Fuel Cell System
High-Efficiency Fuel Cell System with Carbon Dioxide Capture Assembly and Method
Stable Electrolyte Matrix for Molten Carbonate Fuel Cells
Shift Reactor for Direct Fuel Cell Hydrogen System
Reinforced Matrix for Molten Carbonate Fuel Cell and Method for Manufacturing the Same
Fuel Cell-Fuel Cell Hybrid System for Energy Storage
Load-Following Fuel Cell System with Energy Storage
Binder for Electrolyte Matrix for Molten Carbonate Fuel Cells
Fuel Cell Matrix Composition and Method of Manufacturing Same
System for Rebalancing a Pressure Differential in an Anode Exhaust System of a Fuel Cell with a Relational Water Seal
Steam Generator for Fuel Cell Applications
Fuel Cell Stack Inlet Flow Control
Power Producing Gas Separation System and Method
Load Following Power Generation and Power Storage Using Rep and Pem Technology
Corrosion Resistant Current Collector for High-Temperature Fuel Cell
Wet Seal Caulk with Enhanced Chemical Resistance
Fuel Cell System Having Enhanced CO2 Capture
System for Capturing CO2 from a Fuel Cell
Energy Storage Using an Rep with an Engine
Hydrogen and Carbon Monoxide Generation Using an Rep with Partial Oxidation
Pressure Balancing of Anode and Cathode in a Fuel Cell System
System for Fast Draining of an Airfan Heat Exchanger and Methods of Using the Same
Ceramic Felt Material for High-Temperature Fuel Cells
Fluidized Catalytic Cracking Unit System with Integrated Reformer-Electrolyzer-Purifier
Supported Nickel Catalysts Used as Direct Internal Reforming Catalyst in Molten Carbonate Fuel Cells
Carbon Dioxide Removal from Anode Exhaust of a Fuel Cell by Cooling/Condensation
Fuel Cell Module Housing with Field Replaceable Stacks
In-Situ Monitoring of Flue Gas Contaminants for Fuel Cell Systems
Cathode Flow Fuel Cell Systems and Manifolds with an Add-on Stiffener
Molten Carbonate Fuel Cell Anode Exhaust Post-Processing for Carbon Dioxide
High Efficiency Fuel Cell System with Intermediate CO2 Recovery System
High Efficiency Fuel Cell System with Hydrogen and Syngas Export
Carbon Dioxide Removal System for Anode Exhaust of a Fuel Cell
Carbon Dioxide Sequestration Using Molten Carbonate Fuel Cell and Hydrogen Separation Technology
Modular Enclosures for Fuel Cell Stacks That Allow for Individual Installation and Replacement of a Fuel Cell Stack in the Field
Carbon Dioxide Capturing Steam Methane Reformer
Application:
16/097,162 →
Publication:
US 2021/0221693
Methanation of Anode Exhaust Gas to Enhance Carbon Dioxide Capture
Direct Current (Dc) Load Levelers
Low Pressure Carbon Dioxide Removal from the Anode Exhaust of a Fuel Cell
System and Method for Removing Water and Hydrogen from Anode Exhaust
Ultra High Efficiency Fuel Cell Power Generation System
Fuel Cell Response to Electrical Grid Frequency Events
Fuel Cell Load Cycling to Support the Electric Grid
High-Performance Electrolyte for Molten Carbonate Fuel Cell
System and Method for Increasing a Carbon Monoxide Content of Syngas Produced by a Steam Methane Reformer
Heat Exchanger with Porous Material
Two-Layer Anode for Molten Carbonate Fuel Cells
Application:
16/347,902 →
Publication:
US 2019/0280306
External Mixer-Eductor-Oxidizer and Module Connections Thereof
Heat Recovery from an Electrochemical Hydrogen Separation System
Humidity Transfer Assemblies for Fuel Cells and Higher-Temperature Electrochemical Systems
Edge Leveler with Offset Rollers
Two-Phase Water Cooling in an Electrochemical Hydrogen Separator
Regeneration of Molten Carbonate Fuel Cells for Deep CO2 Capture
Application:
62/773,408 →
Flow Field Baffle for Molten Carbonate Fuel Cell Cathode
Application:
62/773,420 →
Cathode Collector Structures for Molten Carbonate Fuel Cell
Application:
62/773,429 →
Operation of Molten Carbonate Fuel Cells with Enhanced CO2 Utilization
Application:
62/773,438 →
Fuel Cell Staging for Molten Carbonate Fuel Cells
Application:
62/773,452 →
Elevated Pressure Operation of Molten Carbonate Fuel Cells with Enhanced CO2 Utilization
Application:
62/773,466 →
Layered Cathode for Molten Carbonate Fuel Cell
Application:
62/773,477 →
Reforming Catalyst Pattern for Fuel Cell Operated with Enhanced CO2 Utilization
Application:
62/773,485 →
Fuel Cell with Protection from Pressure Imbalance
Application:
62/784,210 →
Related Assignments
(25)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignor's Interest
Nov 30, 1999
From: LI, JIAN; YUH, CHAO-YI; LUCAS, THOMAS; PRIMERANO, MICHAEL
To: FUELCELL ENERGY, INC.
Reel/Frame 010427/0706 →
Assignment of Assignor's Interest
Feb 18, 2000
From: GHEZEL-AYAGH, HOSSEIN; LEO, ANTHONY JOHN; SANDERSON, ROBERT A.
To: FUELCELL ENERGY, INC.
Reel/Frame 010620/0611 →
Assignment of Assignor's Interest
Aug 11, 2000
From: BLANCHET, SCOTT; CRAMER, MICHAEL; ZEPKO, RICHARD F.
To: FUELCELL ENERGY, INC.
Reel/Frame 011036/0247 →
Assignment of Assignor's Interest
Dec 13, 2000
From: LI, JIAN; MARU, HANSRAJ C.
To: FUELCELL ENERGY, INC.
Reel/Frame 011397/0750 →
Assignment of Assignor's Interest
Dec 18, 2000
From: BLANCHET, SCOTT; CRAMER, MICHAEL; HAYES, RICHARD P.
To: FUELCELL ENERGY, INC.
Reel/Frame 011377/0787 →
Assignment of Assignor's Interest
May 3, 2001
From: HUNG, CHAO; LI, JIAN
To: FUELCELL ENERGY, INC.
Reel/Frame 011777/0133 →
Assignment of Assignor's Interest
Jun 26, 2001
From: BLANCHET, SCOTT; DOYON, JOEL; NOVACCO, LAWRENCE
To: FUEL CELL ENERGY, INC.
Reel/Frame 011949/0213 →
Assignment of Assignor's Interest
Dec 20, 2001
From: YUH, CHAO-YI; LI, JIAN
To: FUELCELL ENERGY, INC.
Reel/Frame 012440/0036 →
Assignment of Assignor's Interest
Jan 22, 2002
From: KELLEY, DANA A.; HAYES, RICHARD P.
To: EVERCEL, INC.
Reel/Frame 012496/0563 →
Corrected Recordation to Correct Name of Receiving Party
May 7, 2002
From: KELLEY, DANA A.; HAYES, RICHARD P.
To: FUELCELL ENERGY, INC.
Reel/Frame 012871/0824 →
Assignment of Assignor's Interest
Jun 13, 2002
From: LUCAS, THOMAS M.; DOYON, JOEL D.
To: FUELCELL ENERGY, INC.
Reel/Frame 013006/0461 →
Assignment of Assignor's Interest
Jul 2, 2002
From: BLANCHET, SCOTT; PATEL, PINAKIN
To: FUELCELL ENERGY, INC.
Reel/Frame 013087/0203 →
Assignment of Assignor's Interest
Aug 23, 2002
From: JOHNSEN, RICHARD; YUH, CHAO-YI; ALEXANDER, MICHAEL
To: FUELCELL ENERGY, INC.
Reel/Frame 013222/0863 →
Assignment of Assignor's Interest
Dec 24, 2002
From: BLANCHET, SCOTT
To: FUELCELL ENERGY, INC.
Reel/Frame 013618/0466 →
Assignment of Assignor's Interest
Dec 24, 2002
From: BLANCHET, SCOTT
To: FUELCELL ENERGY, INC.
Reel/Frame 013617/0884 →
Assignment of Assignor's Interest
Feb 10, 2003
From: HUANG, CHAO M.; YUH, CHAO-YI; FAROOQUE, MOHAMMAD
To: FUELCELL ENERGY, INC.
Reel/Frame 013760/0044 →
Assignment of Assignor's Interest
Apr 2, 2003
From: FAROOQUE, MOHAMMAD; YUH, CHAO-YI
To: FUELCELL ENERGY, INC.
Reel/Frame 013851/0433 →
Assignment of Assignor's Interest
Apr 2, 2003
From: LI, JIAN
To: FUELCELL ENERGY, INC.
Reel/Frame 013941/0048 →
Assignment of Assignor's Interest
Apr 3, 2003
From: YUH, CHAO-YI; FAROOQUE, MOHAMMAD; JOHNSEN, RICHARD
To: FUELCELL ENERGY, INC.
Reel/Frame 013952/0558 →
Confirmatory License
May 24, 2004
From: FUEL CELL ENERGY, INC.
To: ENERGY, UNITED STATES DEPARTMENT OF
Reel/Frame 015362/0638 →
Assignment of Assignor's Interest
Sep 2, 2005
From: SHAH, JAGDISH
To: FUELCELL ENERGY, INC.
Reel/Frame 016937/0909 →
Assignment of Assignor's Interest
Sep 2, 2005
From: CRAMER, MICHAEL; HAYES, RICHARD P.; KELLEY, DANA A.
To: FUELCELL ENERGY, INC.
Reel/Frame 016944/0146 →
Assignment of Assignor's Interest
Sep 12, 2005
From: PATEL, PINAKIN
To: FUELCELL ENERGY
Reel/Frame 016963/0378 →
Confirmatory License
Mar 20, 2006
From: FUEL CELL ENERGY, INC.
To: ENERGY, UNITED STATES DEPARTMENT OF
Reel/Frame 017722/0532 →
Confirmatory License
Mar 20, 2006
From: FUEL CELL ENERGY, INC.
To: ENERGY, UNITED STATES DEPARTMENT OF
Reel/Frame 017722/0441 →