Patent Assignment
Reel/Frame 064819/0383
Assignment of Assignor's Interest
Recorded: 2023-09-06
Pages: 48
Assignor
ABB SCHWEIZ AG
Executed: 2023-07-03
Assignee
ACLEAP POWER INC.
NO. 18, SEC. 2, ZHONGYANG S. RD., BEITOU DIST., TAIPEI CITY, 112030, TAIWAN
Covered Properties
(165)
Compensation Circuit Method of Operations Thereof and Converter Employing the Same
Patent:
6,069,807 →
Application:
09/395,149 →
Environmental Control System for Use with a Battery Cabinet and Method of Operating a Fan Therein
Patent:
6,936,372 →
Application:
10/219,713 →
An Auxiliary Active Clamp Circuit, a Method of Clamping a Voltage of a Rectifier Switch and a Power Converter Employing the Circuit or Method
Patent:
6,882,548 →
Application:
10/373,418 →
Transient Suppressor and Power Converter Employing the Same
Patent:
7,187,531 →
Application:
10/393,166 →
Gate Driver with a Dc Offset Bias Circuit and a Power Converter Employing the Same
Patent:
6,822,882 →
Application:
10/632,256 →
Controller for Complementary Switches of a Power Converter and Method of Operation Thereof
Buck Converter with Multiple Outputs and Method of Operation Thereof
Apparatus for Moving a Battery
Printed Wiring Board Having Edge Plating Interconnects
Patent:
7,180,397 →
Application:
10/783,073 →
Circuit, Method and System for Providing One or More Phase Voltages from Input Voltages
Drive Circuit for a Synchronous Rectifier, Method of Providing Drive Signals Thereto and Power Converter Incorporating the Same
Vector Controller, a Polyphase Synchronous Rectifier, and a Method of Vector-Controlling Thereof
Multi-Connection Via
Patent:
7,852,635 →
Application:
10/853,456 →
Circuit and Method for Reducing Voltage Spikes Due to Magnetizing Current Imbalances and Power Converter Employing the Same
Neutral Point Controller, Method of Controlling and Rectifier System Employing the Controller and the Method
Modulation Controller, Method of Controlling and Three Phase Converter System Employing the Same
System and Apparatus for Fixing a Substrate with a Heat Transferring Device
Central Current Share Coordinator, Method of Current Sharing and Battery Plant Employing the Same
Reconfigurable Power Distribution Panel
Lossless Clamp Circuit for Dc-Dc Converters
Ejector Faceplate for Electronics Module
Electromagnetic Apparatus and Method for Making a Multi-Phase High Frequency Electromagnetic Apparatus
Apparatus and Method for Establishing a Magnetic Circuit
Apparatus and Method Securing a Component in a Receiver Structure
Soft-Transition Controller of a Synchronous Converter
Apparatus and Method for Distributing Electrical Power from a Plurality of Power Sources Among a Plurality of Electrical Conductors
System and Method of Determining Latent Failures in Telephone Wire-Pair Power Distribution
Circuit and Method for Changing Transient Response Characteristics of a Dc/Dc Converter Module
Printed Wiring Board Having Edge Plating Interconnects
Apparatus and Method for Holding a Cover in a Closed Orientation
Reverse Biasing Active Snubber
Fault Detector for a Tip and Ring Circuit, a Method of Protecting Such a Circuit and a Power Supply Including the Fault Detector
Controller and Method for Controlling Converters of Disparate Type
Apparatus to Predict Fan Wear-Out and Impending Failure and Method of Manufacturing the Same
Llc Converter Synchronous Fet Controller and Method of Operation Thereof
Interleaved Llc Power Converters and Method of Manufacture Thereof
Dc Plant Controller and Method for Selecting Among Multiple Power Sources and Dc Plant Employing the Same
Adaptive Low Voltage Disconnect Controller, Method of Protecting a Battery and a Power System Manager
Interrupter, a Method of Responding to a Monitored Event and an Integrated Circuit Including an Interrupter
Platform for a Power Distribution System
Cabinet for a Power Distribution System
Cabinet for a High Current Power Distribution System
Apparatus and Method for Effecting Electrical Termination with a Plurality of Types of Termination Structures
Systems and Methods for Charging Using a Permitted Charging Current
Multilevel Power Converter and Methods of Manufacturing and Operation Thereof
Optimization of a Power Converter Employing an Llc Converter
Polyphase Power Management System for Telecommunications Equipment Site Power Plant and Method of Operation Thereof
Bias Supply, a Power Supply and a Method of Using Bias Supply Voltage Levels to Signal Information Across an Isolation Barrier
System and Method for Increasing Dc Power System Efficiency Without Requiring a Large Battery Reserve
Multi-Function Inductor and Manufacture Thereof
Self-Driven Synchronous Rectifier Drive Circuit, Method of Operation Thereof and Power Converter Incorporating the Same
Cabinet for a Power Distribution System
High Efficiency Power Amplifier Power Architecture
Dc Plant Controller and Method for Selecting Among Multiple Power Sources
Synchronous Rectifier Driver Circuit Rectifier
Dc Plant for Selecting Among Multiple Power Sources
Monotonic Pre-Bias Start-Up of a Dc-Dc Converter
Paralleled Power Converters with Auto-Stagger Start-Up
Llc Converter with Dynamic Gain Transformation for Wide Input and Output Range
Power Module Protection at Start-Up
Patterning Method for Component Boards
Protective Sleeve for Electrical Components
Regulated Controller with Self-Adjusting Output Set-Point Control
System and Method for Information Communication Between Electrically Isolated Circuits
Optimized Control of a Power Converter in Response to Load Conditions
Input Relay Architecture for Rectifying Power Converters and Suitable for Ac or Dc Source Power
Power Converter Operable from Various Power Sources
Rail Mounting System and Detaching Method
Systems and Methods for Power Interruption
Integrated Magnetic Assemblies and Methods of Assembling Same
Transformer with Planar Primary Winding
Component Holding Structures, System, and Method
Power Distribution Rack Bus Bar Assembly and Method of Assembling the Same
Methods and Systems for Calibrating a Resonant Converter
Power Converter and Methods for Increasing Power Delivery of Soft Alternating Current Power Source
Systems and Methods for Master Arbitration
Integrated Inductor Assemblies and Methods of Assembling Same
Methods and Systems for Improving Load Transient Response in Llc Converters
Integrated Magnetic Assemblies and Methods of Assembling Same
Interleaved Llc Converters and Current Sharing Method Thereof
Magnetic Device Having Integrated Current Sensing Element and Methods of Assembling Same
Integrated Power Racks and Methods of Assembling the Same
Magnetic Device Having Integrated Current Sensing Element and Methods of Assembling Same
Uneven Surface Deflection and Amplitude Measurement Tool
Drive Circuit for Synchronous Rectifier and Method Thereof
Buck-Boost Converter and Method for Regulation
Power Distribution System Using Multiple Power Modules, and Method
Printed Circuit Boards Having Profiled Conductive Layer and Methods of Manufacturing Same
Systems and Methods for Power Conversion and Distribution
Patent:
9,374,926 →
Application:
14/598,332 →
Improving Load Transient Response by Adjusting Reference Current in Isolated Power Converters.
Patent:
9,374,001 →
Application:
14/612,956 →
Systems and Methods for Monitoring and Controlling a Power Converter
Systems and Methods of Increasing Power Converter Efficiency
Patent:
9,729,055 →
Application:
14/643,765 →
Systems and Methods for Controlling a Power Conversion System
Method of Manufacturing a Pcb Including a Thick-Wall Via
Stencil Set and System for Printing Solder Paste for Printed Circuit Boards
Power Connector for Electronic Equipment Supported by a Rack Assembly
Single-Stage Dc-Dc Power Converter
System and Method for Starting Up a High Density Isolated Dc-to-Dc Power Converter
Patent:
10,193,457 →
Application:
15/705,827 →
Systems and Methods for Line Voltage Drop Compensation
Systems and Methods for Boost Circuit Compensator Modules
Systems and Methods for Redundant Line Voltage Drop Compensation
Systems and Methods for Improving Current Sharing Between Paralleled Dc-to-Dc Power Converters Based on Temperature Coefficient
Inductively Balanced Power Supply Circuit and Method of Manufacture
Foil Wound Magnetic Assemblies with Thermally Conductive Tape and Methods of Assembling Same
Integrated Magnetic Assemblies and Methods of Assembling Same
In-Line Bypass Module and Line Drop Compensating Power Converter
Busway Joint Connection Monitoring System and Methods of Assembling the Same
Power Connector for Electronic Equipment Supported by a Rack Assembly
Power Connector for Electronic Equipment Supported by a Rack Assembly
System and Method for Starting Up a High Density Isolated Dc-to-Dc Power Converter
Wide-Range Gain Converters
Patent:
10,826,405 →
Application:
16/428,879 →
Integrated Magnetic Assemblies and Methods of Assembling Same
Single-Stage Isolated Dc-Dc Converters with Interleaved Arms
Patent:
10,819,244 →
Application:
16/447,456 →
Printed Circuit Boards with Thick-Wall Vias
Interposer Printed Circuit Boards for Power Modules
Interposer Printed Circuit Boards for Power Modules
Modular Edge Power Systems
Hybrid Transformers for Power Supplies
Printed Circuit Boards for Power Supplies
Patent:
10,827,602 →
Application:
16/806,058 →
Systems and Methods for Thermal Management Using Matrix Coldplates
Single-Stage Isolated Dc-Dc Converters
Wide-Range Gain Converters
Printed Circuit Boards for Power Supplies
Single-Stage Dc-Dc Power Converter
Interposer Printed Circuit Boards for Power Modules
Apparatus and Method for Encapsulating an Electronic Component
Systems and Methods for Load Line Regulation of Sigma Converters
Printed Circuit Board Layout
Point of Load Module and Heatsink Therefor
Printed Circuit Boards with Plated Blind Slots for Improved Vertical Electrical and/or Thermal Connections
Inductor Mountable on a Circuit Board
Application:
17/673,163 →
Publication:
US 2023/0260690
Apparatus and Method for Dc-to-Dc Conversion
Power Distribution Enclosure Having a Combined Reconfigurable Service Entrance and a Dc Distribution Section
Systems and Methods for Coordinating Power Delivery in a Modular Multi-Phase Power Delivery System
Method and Device for Boosting Variable Voltages
Application:
17/970,781 →
Publication:
US 2024/0137069
Smart Battery Modules for Rack Systems
Application:
18/090,739 →
Publication:
US 2024/0222712
Integrated Magentic Assembly Including a Multi Turn Inductor on a Multi-Component Core
Application:
18/159,436 →
Publication:
US 2024/0249872
Automatic Rating Adjustment for Power Converter Modules
System and method of eliminating latent failures in telephone pair power distribution wiring
Application:
60/717,370 →
How to improve DC/DC module transient responses
Application:
60/764,708 →
Tip and Ring Ground Fault Protection for FTTN/FTTC/FTTP Applications
Application:
60/908,888 →
Floor Mounted Dc Power Distribution System
Application:
61/287,057 →
Power Distribution Platform
Application:
61/308,215 →
Interleaved Llc Converter Using Active Balancing
Application:
61/424,351 →
Monotonic Pre-Bias Start-Up of a Dc-Dc Converter
Application:
61/488,453 →
Power Module Protection at Start-Up
Application:
61/545,964 →
Modify Solder Paste Print Approach for Pin Soldering in Reflow Application
Application:
61/546,417 →
Insulating Boot for Electrical Components
Application:
61/547,923 →
Regulated Converter with Self-Adjusting Output Set-Point Control
Application:
61/579,099 →
Current Sense Transformer with Planar Primary Winding Arrangement
Application:
61/658,450 →
Partial Din-Rail Rack Assembly
Application:
61/747,165 →
Central Busway and Bus Bar System for Power Electronics
Application:
61/771,936 →
Rectifier Mode for Soft AC sources
Application:
61/773,040 →
Power System Master Arbitration
Application:
61/774,560 →
Dual Integrated Inductors
Application:
61/782,961 →
Component Holding Structures and System
Application:
61/784,551 →
Integrated Magnetic Assemblies and Methods of Assembling Same
Application:
61/792,574 →
Methods and Systems for Calibrating a Resonant Converter
Application:
61/793,763 →
Interleaved LLC Converters and Current Sharing Method Thereof
Application:
61/793,848 →
Methods and Systems for Improving Load Transient Response in Llc Converters
Application:
61/793,907 →
Inductor with Current Sensing
Application:
61/805,755 →
Systems and Methods of Improving Dc-Dc Converter Efficiency
Application:
62/067,773 →
Systems and Methods of Monitoring a Power System Rectifier
Application:
62/074,336 →
Systems and Methods for Line Voltage Drop Compensation
Application:
62/476,346 →
Busway Joint Connection Monitoring System and Methods of Assembling the Same
Application:
62/575,008 →
Related Assignments
(7)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignor's Interest
Nov 7, 2014
From: YIN, LANLAN; SUN, YIFENG; TONG, XING; WANG, GANG
To: GENERAL ELECTRIC COMPANY
Reel/Frame 034123/0464 →
Change of Name
Mar 13, 2018
From: LINEAGE POWER CORPORATION
To: GE POWER ELECTRONICS, INC.
Reel/Frame 045581/0581 →
Assignment of Assignor's Interest
Aug 29, 2019
From: GENERAL ELECTRIC COMPANY
To: ABB SCHWEIZ AG
Reel/Frame 050207/0405 →
Assignment of Assignor's Interest
Aug 29, 2019
From: GE POWER ELECTRONICS, INC.
To: ABB SCHWEIZ AG
Reel/Frame 050207/0076 →
Assignment of Assignor's Interest
Apr 16, 2020
From: ABB SCHWEIZ AG
To: ABB POWER ELECTRONICS INC.
Reel/Frame 052430/0136 →
Assignment of Assignor's Interest
Apr 20, 2023
From: ABB POWER ELECTRONICS INC.
To: ABB SCHWEIZ AG
Reel/Frame 063410/0501 →
Corrective Assignment to Correct the the Address of the Assignee Previously Recorded at Reel: 063410 Frame: 0501. Assignor(S) Hereby Confirms the Assignment.
Jul 11, 2023
From: ABB POWER ELECTRONICS INC.
To: ABB SCHWEIZ AG
Reel/Frame 064671/0156 →