Patent Assignment
Reel/Frame 069066/0171
Release of Security Interest
Recorded: 2024-09-26
Pages: 26
Assignor
BLUE TORCH FINANCE LLC, AS COLLATERAL AGENT
Executed: 2024-05-01
Assignees
DAYCO PRODUCTS, LLC
16000 COMMON ROAD, ROSEVILLE, MICHIGAN, 48066
DAYCO IP HOLDINGS, LLC
16000 COMMON ROAD, ROSEVILLE, MICHIGAN, 48066
Covered Properties
(155)
Piston Actuator Incorporating Partitioned Pressure Chambers
Coupling Structure Mountable to a Rotatable Shaft
Tensioner with Drainhole
Belt Tensioner and Method for Making a Belt-Tensioner Arm and a Spring Case
Belt Tensioner
Belt Tensioner with Damping Member
Combination Dust Cover and Bearing Retention Member
Torsional Vibration Damper
One-Way Clutched Damper for Automatic Belt Tensioner
Compressed Hub Damper
Recessed Belt Damper
Cast Crankshaft Damper Assembly
Pulley with Torque-Sensitive Clutching
Belt Tensioner and Method for Making a Belt-Tensioner Arm and a Spring Case
Clutched Damper for a Belt Tensioner
Active Vibrational Damper
Deflected Bearing Shield as a Bearing Seal for a Pulley Assembly and Method of Assembly
Cap Retainer and a Pulley Assembly Including the Cap Retainer and Method of Assembly
Pulley with Asymmetric Torque-Sensitive Clutching
Counter-Biased Valve and Actuator Assembly
One-Way Damped Over-Arm Tensioner
Low Noise Pulley
Radial Damping Mechanism and Use for Belt Tensioning
Tensioner with Expanding Spring for Radial Frictional Asymmetric Damping
Belt Tensioner
Tensioner with Expanding Spring for Radial Frictional Asymmetric Damping
Pulley with Asymmetric Torque-Sensitive Clutching
Flatwire Radial Asymmetric Damping by Coil Reaction Path
Belt Tensioning Device with Variable Spring Factor
Sealed Belt Tensioning Device
Torsional Vibration Damper with Nonuniform Elastomer Profile
Recessed Belt Damper
Recirculating Ball Screw Assembly
Tensioner with Expanding Spring for Radial Frictional Asymmetric Damping
Belt Tensioner for a Power Transmission Belt System
Wastegate Valve and Turbocharger Having Same
Accessory Drive Decoupler
Tire Pressure Maintenance Apparatus and System
Clutch for Linking an Input Shaft with a Drive Mechanism and Methods of Coupling Control Using the Same
Counter-Biased Valve and Actuator Assembly
Variable Flow Valve for Turbochargers
Tensioner with Multiple Nested Torsion Springs
Pressure Piston Actuator with Non-Rigid Shaft
Low Noise Pulley
Piston Actuator Controlling a Valve and Method for Operating the Same
Clutched Damper for a Belt Tensioner
Patent:
46,019 →
Application:
14/191,053 →
Belt Tensioner with Supplemental Force Element
Pulley Assembly with Radially Oriented Decoupling Mechanism
Material Compensation Joint and Radial Vibration Damper Having Same
Reusable Dust Cap for a Pulley Assembly
Variable Flow Valve Having Metered Flow Orifice
Sprung Gate Valves Movable by an Actuator
Aspirators for Producing Vacuum Using the Venturi Effect
Torsional Vibration Damper
Pneumatic Compressor Recirculation Valve System for Minimizing Surge Under Boost During Throttle Closing
Pneumatic Compressor Recirculation Valve System for Minimizing Surge Under Boost During Throttle Closing
Aspirator and Ejector System
Pneumatically Actuated Vacuum Pump Having Multiple Venturi Gaps and Check Valves
Dual Aspirator System with Aspirator Shut-Off Valve
Sprung Gate Valves Movable by a Solenoid Actuator
Noise Attenuation in a Check Valve Unit or Apparatus for Producing Vacuum
Diesel Engine Fluid Coolant System Having a Solenoid-Powered Gate Valve
Evacuator System Having Multi-Port Evacuator
Evacuator System for Supplying High Suction Vacuum or High Suction Flow Rate
Noise Attenuation Unit for Engine Systems
Flow Control for Aspirators Producing Vacuum Using the Venturi Effect
Magnetically Actuated Shut-Off Valve
Turbocharger Compressor Recirculation System
Solenoid-Powered Gate Valve
Noise Attenuating Member for Noise Attenuating Units in Engines
Check Valve with Improved Sealing Member
Cap Retainer and a Pulley Assembly Including the Cap Retainer and Method of Assembly
Evacuator with Motive Fin
Torsional Vibration Dampers
Radial Vibration Dampers for Rotating Shafts
Bypass Check Valve and Venturi Devices Having the Same
Vacuum Creation System Having an Ejector, Pneumatic Control Valve and Optionally an Aspirator
Noise Attenuation in a Venturi Device and/or Check Valves
Venturi Devices with Dual Venturi Flow Paths
Torsional Vibration Damper with an Interlocked Isolator
Dual Venturi Device
Aspirated Relief Valve for a Turbocharging System
Retaining Clamp for Molded Plastics
Low Frequency Torsional Vibration Damper
Two-Part Hub for a Torsional Vibration Damper and Method of Making Same
Magnetically Actuated Shut-Off Valve
Low-Cost Evacuator for an Engine Having Tuned Venturi Gaps
Apparatus for a Drive System Having a Cartridge Housing One or More Elastomer Members
Torsional Vibration Dampers
Check Valve with Improved Sealing Member
Sprung Gate Valve
Patent:
9,599,234 →
Application:
14/960,481 →
Damper Isolator with Magnetic Spring
Crankcase Ventilating Evacuator
Variable Flow Valve Having Metered Flow Orifice
Vacuum Producing Device Having a Suction Passageway and a Discharge Passageway Entering Through the Same Wall
Torsional Vibration Damper Spoke Design
Devices for Producing Vacuum Using the Venturi Effect
Check Valves and Venturi Devices Having the Same
Dual Mode Tensioner
Methods for Post-Mold Processing a Venturi Device or Check Valve
Devices for Producing Vacuum Using the Venturi Effect Having a Plurality of Subpassageways and Motive Exits in the Motive Section
Restrictors Using the Venturi Effect
Venturi Devices Resistant to Ice Formation for Producing Vacuum from Crankcase Gases
Magnetically Actuated Shut-Off Valve
Noise Attenuation Unit for Engine Systems
Fluidic Diode Check Valve
Torsional Vibration Dampers Having a Plurality of Elastomeric Ring Bushings
Asymmetric Spoke Design for Torsional Vibration Dampers
Bypass Valve in an Apparatus for Producing Vacuum
Aspirated Relief Valve for a Turbocharging System
Radial Vibration Dampers Having a Tuning Ratio and a Tuning Angle
Sealed Belt Tensioning Device
Valve Gate Within a Venturi Gap of a Venturi Device for Producing Vacuum
Aspirators for Producing Vacuum Using the Venturi Effect
Sprung Gate Valves Movable by an Actuator
Venturi Devices with Dual Venturi Flow Paths
Check Valves and Venturi Devices Having the Same
Low Frequency Torsional Vibration Damper Having a Formed Hub
Bypass Check Valve and Venturi Having Same
Solenoid Activated Vacuum Pump for an Engine System and System Having Same
Low-Cost Evacuator for an Engine Having Tuned Venturi Gaps
Check Valve Insert Defining an Open Position and Check Valves Having Same
Aspirators for Producing Vacuum Using the Venturi Effect
Sprung Gate Valves Movable by an Actuator
Two-Position Gate and Sprung Gate Valves Having a Full-Flow Open Position and a Restricted-Flow Open Position
Crankcase Ventilation System with Constant Restriction in the Flow Direction and Free Flow in an Opposite Direction
Crankcase Ventilation System with a Flow Control Device for on Board Diagnostics
Fuel Tank Protector Valve and Engine Systems Having Same
Quick Connector with a Replaceable Restriction Orifice
Charge Air Cooler Drain System
Magnetically Latching Valve for Fuel Vapor Management Systems and Systems Incorporating Same
Three Port, Five-Way Magnetically Latching Valve for Fuel Vapor Management Systems and Systems Incorporating Same
Devices for Producing Vacuum Using the Venturi Effect Having a Hollow Fletch
Devices for Producing Vacuum Using the Venturi Effect Having a Solid Fletch
System and Methods for a Fuel Tank Pressure Control Pump
High-Offset Belt Tensioner with Counterbalance Torsion Spring Force
Systems and Methods for Make-Up Air Blocking Valve with a Restrictive Poppet Orifice
Type Font
Patent:
766,358 →
Application:
29/511,304 →
Venturi Device
Patent:
821,302 →
Application:
29/530,829 →
Actuated Valve
Patent:
780,296 →
Application:
29/533,486 →
Actuated Valve
Patent:
795,392 →
Application:
29/591,027 →
Actuated Valve
Patent:
796,634 →
Application:
29/591,029 →
Actuated Valve
Patent:
796,005 →
Application:
29/591,032 →
Actuated Valve
Patent:
802,095 →
Application:
29/591,034 →
Actuated Valve
Patent:
796,006 →
Application:
29/591,037 →
Actuated Valve
Patent:
821,546 →
Application:
29/622,740 →
Venturi Device
Patent:
840,920 →
Application:
29/649,221 →
Venturi Device
Patent:
840,921 →
Application:
29/649,238 →
Venturi Device
Patent:
843,315 →
Application:
29/649,240 →
Venturi Device
Patent:
840,922 →
Application:
29/649,249 →
Venturi Device
Patent:
844,550 →
Application:
29/649,252 →
Venturi Device
Patent:
840,923 →
Application:
29/649,255 →
Devices for Producing Vacuum Using the Venturi Effect Having a Hollow Fletch
Application:
63/130,456 →
Devices for Producing Vacuum Using the Venturi Effect Having a Solid Fletch
Application:
63/130,458 →
System and Methods for a Fuel Tank Pressure Control Pump
Application:
63/151,940 →
Related Assignments
(18)
Other recorded transfers of the patents in this record — the chain of ownership.
Assignment of Assignor's Interest
Nov 26, 2013
From: METAVATION, LLC
To: DAYCO PRODUCTS, LLC
Reel/Frame 031676/0639 →
Assignment of Assignor's Interest
Nov 26, 2013
From: DAYCO PRODUCTS, LLC
To: DAYCO IP HOLDINGS, LLC
Reel/Frame 031676/0753 →
Release of Security Interest Recorded at Reel 024850/Frame 0007
Dec 9, 2013
From: WELLS FARGO CAPITAL FINANCE, LLC
To: METAVATION, LLC
Reel/Frame 031785/0020 →
Order Authorizing Sale Free of Liens, Claims, Rights and Security Interests, Including Those of Icon Agent, Llc Recorded at Reel 027712/Frame 0621 and Reel 027712/Frame 0796
Dec 11, 2013
From: UNITED STATES BANKRUPTCY COURT FOR THE DISTRICT OF DELAWARE
To: METAVATION, LLC
Reel/Frame 031794/0402 →
Release of Security Interest
Dec 13, 2013
From: JPMORGAN CHASE BANK, N.A.
To: DAYCO IP HOLDINGS, LLC
Reel/Frame 031815/0858 →
Release of Security Interest at Reel/Frame 023546/0767
Dec 13, 2013
From: JPMORGAN CHASE BANK, N.A.
To: DAYCO IP HOLDINGS, LLC
Reel/Frame 031815/0089 →
Release of Security Interest at Reel/Frame 025496/0096
Dec 13, 2013
From: DEUTSCHE BANK AG, LONDON BRANCH
To: DAYCO IP HOLDINGS, LLC
Reel/Frame 031815/0070 →
Security Agreement
Dec 16, 2013
From: DAYCO IP HOLDINGS, LLC
To: BANK OF AMERICA, N.A., AS COLLATERAL AGENT
Reel/Frame 031817/0737 →
Security Agreement
Dec 17, 2013
From: DAYCO IP HOLDINGS, LLC
To: BANK OF AMERICA, N.A., AS AGENT
Reel/Frame 031832/0554 →
Patent Release (Reel:03817/Frame:0737)
May 22, 2017
From: BANK OF AMERICA, N.A, AS COLLATERAL AGENT
To: DAYCO IP HOLDINGS, LLC; DAYCO PRODUCTS, LLC
Reel/Frame 042523/0770 →
Security Agreement
May 23, 2017
From: DAYCO IP HOLDINGS, LLC
To: BANK OF AMERICA, N.A., AS COLLATERAL AGENT
Reel/Frame 042554/0222 →
Security Agreement
Sep 30, 2022
From: DAYCO IP HOLDINGS, LLC; DAYCO, LLC
To: WELLS FARGO BANK, NATIONAL ASSOCIATION
Reel/Frame 061575/0692 →
Release (Reel 031832 / Frame 0554)
Oct 4, 2022
From: BANK OF AMERICA, N.A.
To: DAYCO IP HOLDINGS, LLC; DAYCO CANADA CORP
Reel/Frame 061596/0442 →
Security Interest
Oct 6, 2022
From: DAYCO PRODUCTS, LLC; DAYCO, LLC; DAYCO IP HOLDINGS, LLC
To: BLUE TORCH FINANCE LLC
Reel/Frame 061620/0098 →
Release (Reel 042554 / Frame 0222)
Oct 7, 2022
From: BANK OF AMERICA, N.A.
To: DAYCO IP HOLDINGS, LLC
Reel/Frame 061623/0587 →
Release of Security Interest
Sep 26, 2024
From: WELLS FARGO BANK, NATIONAL ASSOCIATION, AS AGENT
To: DAYCO IP HOLDINGS, LLC; DAYCO, LLC
Reel/Frame 069066/0236 →
Assignment of Assignor's Interest
Feb 14, 2025
From: DAYCO IP HOLDINGS, LLC
To: PROPULSION SOLUTIONS S.R.L.,
Reel/Frame 070235/0845 →
Change of Name
Feb 26, 2025
From: PROPULSION SOLUTIONS S.R.L.
To: MUVIQ S.R.L.
Reel/Frame 070332/0667 →