Patent Assignment
Reel/Frame 034287/0601
Release of Security Interest
Recorded: 2014-11-07
Pages: 141
Assignor
WILMINGTON TRUST COMPANY
Executed: 2014-10-17
Assignee
GM GLOBAL TECHNOLOGY OPERATIONS LLC
300 RENAISSANCE CENTER, DETROIT, MICHIGAN, 48265-3000
Covered Properties
(1000)
Control System for Shifting an Automatic Transmission
Shading System and Method for Assembling a Shading System
Execution of Half Plane with Limited Charge Capability Near Zero Output Torque Growl Mitigation Strategy via Fast Actuators
Quality Status Display for a Vibration Welding Process
Method of Robust Position Measurement
Pump Drive Launch Device Actuator
Wax Type Thermostat for the Cooling System of an Internal Combustion Engine
Pneumatic Actuator
Secure Software File Transfer Systems and Methods for Vehicle Control Modules
Multi-Speed Transmission with a One-Way Clutch
Security Access Method for Automotive Electronic Control Units
Engine-Out Nox Virtual Sensor Using Cylinder Pressure Sensor
Method of Making Nd-Fe-B Sintered Magnets with Reduced Dysprosium or Terbium
Methods and Systems for Controlling an Actuator of a Vehicle Latch
Near Net Shape Manufacturing Of Rare Earth Permanent Magnets
Speech-Based User Interface for a Mobile Device
Services Identification and Initiation for a Speech-Based Interface to a Mobile Device
Mobile Voice Platform Architecture
Application:
13/628,766 →
Publication:
US US20130103404A1
Mobile Voice Platform Architecture with Remote Service Interfaces
Vehicular Accessory Retention Clip, Assembly, and Method Thereof
Methods And Vehicle Systems For Selectively Using Energy Obtained From A Solar Subsystem
Method for Determining the Speed of a Vehicle and Vehicle
Extended Angular Resolution in Sensor Arrays Using Secondary Echoes
Automated Cold Storage Protection for a Fuel Cell System
Isolation Sleeve
Binary Classification of Items of Interest in a Repeatable Process
Three-Way Diverter Assembly for a Fuel Cell System
System and Method of Differentiating Torque Between Wheels of a Vehicle
Sealed Assemblies and Methods of Unsealing Same
Temperature Sensor Rationalization
Ride Steer Adjustment Device and Method of Adjusting Ride Steer
Vehicle, a Door Assembly for the Vehicle and a Method of Assembling the Door Assembly
Cyber Security in an Automotive Network
Subgasket Design to Dissipate Thermal Energy Generated from Catalytic Combustion Experienced in a PEM Fuel Cell
Method for Operating a Driver Assistance System of a Motor Vehicle and Driver Assistance System for a Motor Vehicle
Application:
13/645,042 →
Publication:
US US20130090806A1
Trunk, Cargo Area, and Truck Bed Storage Press
Dynamic Masking Method for Micro-Truss Foam Fabrication
Steering Column Assembly for a Motor Vehicle
Screw Assembly with Linking Member for Torque Transfer
Vehicular Heat Pump System and Control Method
Internal Combustion Engines and Oil Containment Systems Thereof
Output Torque Error Mitigation for Strong Hybrid Prndl Neutral Operation
Arrangement with Water Box and Water Drain for a Motor Vehicle
Method of Controlling Catalyst Light-Off of a Hybrid Vehicle
Sealing Assembly
Cooling Pump for a Cooling System
Active Aero Diffuser
Vehicle Door Header and Method of Manufacturing Same
Pour Ladle for Molten Metal
Intrinsic Monitoring of Shape Memory Alloy Actuated Devices
Car Body with a Shear Element on One Side
Motor Vehicle Body
Vehicle Battery Pack Cell Voltage Determination
Motor Vehicle, in Particular a Passenger Car
Headlamp Assembly of a Vehicle with Headlamp Fastening Device
Underbody Structure for at Least Two Motor Vehicles
Engine Efficiency System for a Vehicle and Method of Operating an Engine Efficiency System
Inlet Manifold with Dual Port Egr
Application:
13/650,519 →
Publication:
US US20140102429A1
Systems and Methods for Hand Wheel Torsional Vibration Attenuation
Patent:
8,632,096 →
Application:
13/650,536 →
Methods for Simultaneously Treating a Substrate and Adhering or Applying a Bonding Agent Thereto
Application:
13/650,540 →
Publication:
US US20140102628A1
Systems and Methods for Hand Wheel Translational Vibration Attenuation
Patent:
8,632,097 →
Application:
13/650,541 →
Wax-Type Thermostat with Wax Overheating Safety Means
Method and System for Estimating Battery Capacity in a Vehicle
Connector Rod Assembly for Ac Inverter Output
Hybrid Transmission with Single Planetary Gear Set and Multiple Operating Modes
Patent:
8,556,769 →
Application:
13/651,507 →
Fluid Pump Speed Control
System and Method for Controlling a Vacuum Pump That Is Used to Check for Leaks in an Evaporative Emissions System
Electrical System and Method for a Hybrid-Electric Vehicle
Battery Securement Systems and Apparatus
Patent:
8,592,069 →
Application:
13/652,134 →
Combustion Driven Ammonia Generation Strategies for Passive Ammonia Scr System
Power Converter with Diagnostic Unit Power Supply Output
Wheel Suspension Device for a Motor Vehicle
Motor Vehicle Body with Plasma-Treated Gluing Surface
Easily Mountable Spoke Module for the Spokes of a Wheel for Motor Vehicles
Clamping Element and Method for Use
Exhaust System for a Combustion Engine
Application:
13/653,627 →
Publication:
US US20130098009A1
Synthesis of Platinum-Alloy Nanoparticles and Supported Catalysts Including the Same
Plate-Style Water Vapor Transfer Unit with Integral Headers
System and Method for Providing Fault Mitigation for Vehicle Systems Having High and Low Side Drivers
System for Controlling Locking Module for Vehicle Door
Oil Pan for an Internal Combustion Engine
Patent:
8,561,590 →
Application:
13/654,471 →
Adaptable Bin with Retractable Cup Holder
Self-Diagnostic Non-Bussed Control Module
Engine Assembly with Variable Valve Displacement on One Cylinder Bank and Method of Controlling Same
Coatings for Lithium Titanate to Suppress Gas Generation in Lithium-Ion Batteries and Methods for Making and Use Thereof
Centrifugal Pump
Application:
13/655,361 →
Publication:
US US20140030086A1
Shape Memory Polymer Article
Application:
13/655,915 →
Publication:
US US20140113149A1
Split and Brazed Powdered Metal Valve Body
Application:
13/655,944 →
Publication:
US US20140110620A1
Safety Device with Elastic Membrane
Safety Device with Elastic Membrane
Support Device
Method for Operating an Internal Combustion Engine Using a Corrected Energizing Time for Fuel Injections
Electrically-Variable Transmission for a Vehicle
Transmission for a Vehicle and a Method of Assembling a Modular Motor Assembly in the Transmission
Method for Mitigating Cure Shrinkage in High Temperature-Processed Thermosetting Adhesives and SMC
Method for Performing Cell Balancing of a Battery System Based on Cell Capacity Values
Vehicular Airflow Outlet
Remote Activated Garage Door Opener Functions via a Graphical User Interface in a Vehicle
Cylinder Lubrication System
PFCB Nanometer Scale Fibers
Serrated Shaft Debris Collector
Vehicle Seat for a Motor Vehicle
Vehicle Assembly with Display and Corrective Lens
Application:
13/659,611 →
Publication:
US US20140111644A1
Binary Clutch Assembly Control in Neutral-to-Drive or Neutral-to-Reverse Transmission Shifts
Closure Restraint System with Camming Self Adjustment
Patent:
8,628,141 →
Application:
13/659,984 →
Bracket Having a Secondary Locking Feature for Attachment of a Shift Cable to a Transmission
Hybrid Transmission
Cathode Pressure Control Utilizing a Capacitance Model
Systems and Methods for Controlling a Compressor Recirculation Valve
Predictive Cathode Compressor Speed Control in a Fuel Cell Power System
Cathode Flow Split Control and Pressure Control for a Vehicle Fuel Cell Power System
Reactive Compressor Surge Mitigation Strategy for a Fuel Cell Power System
Coolant Flow Pulsing in a Fuel Cell System
Application:
13/660,089 →
Publication:
US US20140120440A1
Humidity Corrections for Fuel Setpoint Adaptation
Vehicle Locking System
Application:
13/660,541 →
Publication:
US US20140117682A1
Method for Preventing Galvanic and Chemical Corrosion in Emblems Containing Second Surface Decoration and Metallization and Method of Making and Using the Same
Application:
13/660,588 →
Publication:
US US20140120273A1
Superelastic Shape Memory Alloy Overloading and Overheating Protection Mechanism
System and Method for Determining Position in a Multiple-Axis Machine
Application:
13/661,660 →
Publication:
US US20140121821A1
Method for Fabricating Rotor for Induction Motor
Systems and Methods for Enhancing Fuel Cell Vehicle Startup
Engine Sound Enhancement System for a Fixed Gear Transmission
High Voltage Safety Lock Sensing - Single Sensor Linear Actuator
Acceleration-Based State Control of a Binary Clutch Assembly
Garage Shift Control of a Binary Clutch Assembly
Adaptive Speed-Based Control of a Binary Clutch Assembly
Message and Vehicle Interface Integration System and Method
Application:
13/664,481 →
Publication:
US US20130117021A1
Cooler Pipe and Method of Forming
Application:
13/664,485 →
Publication:
US US20140116668A1
Nitric Oxide Oxidation Over Silver-Based Catalysts
Systems and Methods for Vehicle Cruise Control
SILVER PROMOTED CLOSE-COUPLED NOx ABSORBER
Vehicle Lane Checking Monitor
In-Vehicle Functions Using Short-Range Communications
Steering Systems
Low Profile Applique Antenna
Application:
13/665,018 →
Publication:
US US20140118199A1
Speech Recognition Functionality in a Vehicle Through an Extrinsic Device
Method and System for Charging a Plug-in Electric Vehicle
Method and System for Fault Protection
Method of Controlling a Hybrid Powertrain with Multiple Electric Motors to Reduce Electrical Power Losses and Hybrid Powertrain Configured for Same
Application:
13/665,964 →
Publication:
US US20140121867A1
Vehicle with Front Impact Beam Lateral Load Transferring Member
Active Airflow Outlet for a Vehicle and Method
Statistical Data Learning Under Privacy Constraints
System and Method for Reducing Transient Brake Caliper Drag
Device Location Determination by a Vehicle
Electrical Limitation of a Steering Gear Travel Path
Method for Regulating a Hydraulic Braking System of a Motor Vehicle
Longitudinal Frame for the Chassis Structure of a Motor Vehicle
Engine Damper Bypass for Hybrid Powertrains
Generator Attachment Assembly and Method
Oil Deflector
Solution to Optical Constraint on Microtruss Processing
Transmission Hydraulic Control System Having an Automatic Engine Stop-Start Accumulator
Six, Seven, and Eight Speed Layshaft Automatic Transmission
Multi-Speed Transmission
Multi-Speed Transmission
Lithium Ion Batteries
Crash Box
Air Outlet Device
Application:
13/670,509 →
Publication:
US US20130122797A1
Method for Operating a Motor Vehicle Safety System and a Safety System for a Motor Vehicle
Application:
13/670,514 →
Publication:
US US20130124052A1
System and Method for Determining a Speed of a Vehicle
Application:
13/670,518 →
Publication:
US US20130124061A1
System and Method for an Information and Entertainment System of a Motor Vehicle
Application:
13/670,521 →
Publication:
US US20130131918A1
Semantics Mismatch in Service Information
Motor Vehicle Body with Expandable Element
Motor Vehicle Body with Active Hood
Polymeric Vessel
Patent:
8,524,344 →
Application:
13/670,893 →
Cross Member of a Motor Vehicle Body
Adapting an Energy Storage System Thermal Conditioning Setpoint Based on Historical Usage
Application:
13/670,903 →
Publication:
US US20140129063A1
Vehicle Latch System with Over-Slam Bumper
Patent:
8,631,608 →
Application:
13/670,913 →
Valve Integrated Park Inhibit Solenoid Assembly
Support for a Functional Element in a Pair of Rails Within a Passenger Compartment of a Motor Vehicle
Multi-Speed Transmission
Motor Vehicle with Crashbox
Lighting Device of a Vehicle
Vehicle Lamp with Light-Emitting Diode as Light Source
Motor Vehicle Body
Water Box and Method for Production
Exhaust Gas Aftertreatment Desulfurization Control
Patent:
8,617,495 →
Application:
13/671,889 →
Engine-Out Soot Flow Rate Prediction
System and Method for Particulate Filter Regeneration
Mobile Device-Activated Vehicle Functions
System and Method for Controlling Fuel Injection When an Engine Is Automatically Started to Decrease an Engine Startup Period
System and Method for Particulate Filter Regeneration
System and Method for Diagnosing a Fault in an Oxygen Sensor Based on Engine Speed
Triple Clutch Multi-Speed Transmission
Triple Clutch Multi-Speed Transmission
Quad-Clutch Multi-Speed Transmission
Rear Integration of a Suspension System and Fuel Tanks in Fuel Cell Vehicles
Motor Vehicle Door
Application:
13/672,895 →
Publication:
US US20130127180A1
Vehicle Floor Assembly and Method for Assembly
Adaptive Engine Speed Control to Prevent Engine from Roll and Stall
Energy Control Systems and Methods for a Powertrain of a Vehicle
Insulated Stud for Attaching Applique to Metal Body Vehicle and Methods of Making and Using the Same
Exhaust Gas Oxygen Sensor Fault Detection Systems and Methods Using Fuel Vapor Purge Rate
Multi-Speed Transmission Gear and Clutch Arrangement
Vehicle Battery Discharge Systems and Methods Using Field Access Points
Controls and Diagnostics for Mechanical Friction Elements
Energy Based Transmission Friction Element Diagnostic
Regeneration of a Particulate Filter Based on a Particulate Matter Oxidation Rate
Clocked Retaining Assembly and Technique
Cast-In-Place Induction Rotor End Rings with Improved Interlocks
Reconfigurable Roof Rack Attachment Assembly for a Vehicle
Automatic Transmission with Dual Offgoing Clutches
Patent:
8,562,486 →
Application:
13/676,154 →
Automated Electric Manual Transmission
Shape Memory Alloy Based Linear Actuator Assembly
Hybrid Vehicle with Dynamically-Allocated High-Voltage Electrical Power
Multi-Speed Transmission
Composite Accumulator Having Metal Insert
Transmission Sealing and Drainage Device
Simple and Efficient Turbulator to Promote the Uniform Heat Exchange Inside the Battery Cooling Channel
Application:
13/677,978 →
Publication:
US US20140131015A1
Methods and Systems for Characterizing Vehicle Tires
Active Safety System and Method for Operating the Same
System and Method for Closed-Loop Driver Attention Management
Steering Wheel Device for Indicating Required Supervisory Control of a Vehicle and Method for Use
System and Method for Managing Misuse of Autonomous Driving
Application:
13/678,652 →
Publication:
US US20130131907A1
Engine Front Cover with Rotational Support Insert
Four Counterweight Crankshaft for 90 Degree V6 Engine
Multi-Speed Transmission
Method for Providing a Controlled Neutral in Lieu of a Conventional Neutral in an Electro-Mechanical Transmission
Heat Exchanger for a Motor Vehicle Air Conditioning System
Application:
13/679,601 →
Publication:
US US20130139541A1
Procedure for Stack Voltage Recovery
Method and Apparatus for State of Health Estimation of Object Sensing Fusion System
Dual Learn Windows for Brake Pedal Released Position
Methods of Controlling Vehicle Interfaces Using Device Motion and Near Field Communications
Synchronizing Disconnect Device
Transmission with Band Clutch
Method and Apparatus for Controlling Engine Operation in a Multi-Mode Powertrain System
Patent:
8,696,514 →
Application:
13/681,466 →
Gps-Based Predictive Shift Schedule for Automatic Transmission
Method and Apparatus for Controlling a Multi-Mode Powertrain System
Self-Healing Corrosion Protection Coatings for Nd-Fe-B Magnets
Application:
13/681,724 →
Publication:
US US20140139304A1
Utilizing Vacuum to Pre-Compress Foam to Enable Cell Insertion During HV Battery Module Assembly
System And Method For Heating The Passenger Compartment Of A Fuell Cell-Powered Vehicle
Application:
13/681,943 →
Publication:
US US20140138452A1
Stackable Cartridge Module Design
Engine Assembly with Phasing Mechanism on Eccentric Shaft for Variable Cycle Engine
Universal Joint
Audio System for a Motor Vehicle
Vehicle Application for Air Storage Cathode Carbon Loss Estimation
Pipe Coupling for the Fluid-Tight Attachment of Components in an Air Conditioning System
Application:
13/685,514 →
Publication:
US US20130134707A1
Gasbag for a Pedestrian Protection System and a Motor Vehicle Equipped Therewith
Load-Bearing Structural Component for the Body of a Motor Vehicle
Locking Cap for a Fluid Reservoir
Airflow Control Systems and Methods
Vehicle Range Projection for Multiple Drivers of a Shared Vehicle
Method for Controlling Exhaust Gas Re-Circulation System in an Internal Combustion Engine
Method and Apparatus for Isolating a Fault in a Controller Area Network
Lifter Guide Assembly for an Internal Combustion Engine
Induction Powered Panels
Systems and Methods for Determining Mass Properties of Vehicle Components
Magnetorheological Fluids Including Shape Memory Alloys
Methods and Systems for Controlling a Proportional Integrator
Methods and Systems for Controlling a Boost Converter
Adaptive Position Reporting
Application:
13/687,788 →
Publication:
US US20140066092A1
Counterfeit-Resistant Labels and Method
Hybrid Thermal System with Device-Specific Control Logic
Vehicle Fluid Regulator Valve Diagnostic System
Diesel Oxidation Catalyst Aging Level Determination Using Nox Sensor NO2 Interference
Diagnostic Operation Strategy for Diesel Oxidation Catalyst Aging Level Determination Using Nox Sensor NO2 Interference
Method and System for Initiating an Engine After-Run State and Controlling a Nitrogen Oxide Sensor Self-Diagnostic Tool
Challenge-Response Methodology for Securing Vehicle Diagnostic Services
Fan Shroud and Seal Ring Assembly, and Method Thereof
Engine Including Exhaust Gas Recirculation Injection System
Application:
13/688,847 →
Publication:
US US20140144413A1
Methodology and Mechanisms for Enhancing High Ambient Temperature Performance in Shape Memory Alloy Applications
System and Method for Using Exhaust Gas to Heat and Charge a Battery for a Hybrid Vehicle
Methods For Forming Molded Components Having A Visible Designer Feature and/or Improved Operational Properties Via A Porous Preform
Application:
13/689,840 →
Publication:
US US20130081776A1
Seal Alignment Systems
Exhaust Gas Heat Recovery System
Systems and Methods for Balancing a Vehicle Battery System
Systems and Methods to Protect Against Over-Discharge in a Battery System
Muffler Including a Resonator Slide-in Unit
Motor Vehicle Body
Motor Vehicle Body
Application:
13/692,923 →
Publication:
US US20130341964A1
Engine Including External EGR System
Application:
13/693,140 →
Publication:
US US20140150759A1
Projected Rear Passenger Entertainment System
Method and Apparatus for Controlling a Shift in a Multi-Mode Powertrain System
Back Pressure Valve with Inductively Heated Flap
Diesel Fuel Temperature Relief Valve
Methods, Systems and Apparatus for Generating Voltage Commands Used to Control Operation of a Permanent Magnet Machine
Battery Thermal System with a Stacking Frame
Integrated Environmentally Protective Barrier with Light Blocking and Light Transmitting Features to Optically Communicate Between Two Electronic Devices Operating in Different Environments
Cost-Effective Reliable Method to Depower Rechargeable Electric Batteries
System and Methods for Controlled Depowering of Automobile Batteries
Hybrid Engine Operation Selection Strategy for Mitigation of Driveline Disturbance
Patent:
8,700,247 →
Application:
13/705,938 →
Fuel Cell Flow Field Plate Including Non-Stoichiometric Metal Oxide Layer
Application:
13/706,211 →
Publication:
US US20130095251A1
Double Wall Dome Seal for a Vehicle
Patent:
8,651,527 →
Application:
13/706,392 →
Transmission with Mems-Based Hydraulic Circuit
Multiplexed Fluid Control Circuit
Patent:
8,485,931 →
Application:
13/706,400 →
Anode Leak Location Detection
Method for Running a Fuel Cell System with a Failed Stack Health Monitor
Vehicle Seat and Manufacturing Method
Application:
13/708,752 →
Publication:
US US20130147248A1
Reinforcement for a Vehicle Pillar
SYNTHESIS OF Cu/SAPO-34 WITH VARIABLE COPPER LOADINGS
Containment Control for a Continuously Variable Transmission
Arc Coil Spring Configuration
Motor Vehicle Combination and Method for Operating
Method for Assisting Driver of Motor Vehicle Given Loss of Alertness
Application:
13/711,347 →
Publication:
US US20130158741A1
Particulate Filter Regeneration Management
Driver Alerts
Hydraulic Accumulator Fill Estimation for Controlling Automatic Engine Stop/Start
Application:
13/712,148 →
Publication:
US US20140163845A1
Bypass System for a Transmission
Stochastic Pre-Ignition Prediction and Mitigation Systems and Methods
Systems and Methods for Controlling Cylinder Deactivation and Accessory Drive Tensioner Arm Motion
Application:
13/712,267 →
Publication:
US US20140163839A1
Coulomb Frictional Damping Coated Product
Application:
13/712,338 →
Publication:
US US20140158457A1
Storage Compartment Arrangement for a Motor Vehicle with a Displaceable Storage Compartment Cover
Side Paneling System
Plug-In Charge Capacity Estimation Method for Lithium Iron-Phosphate Batteries
Suppression of Charge Pump Voltage During Switching in a Matrix Converter
Application:
13/712,801 →
Publication:
US US20130170267A1
Oil Pressure Control System for Switchable Valve Train Components
Patent:
8,662,035 →
Application:
13/713,387 →
Systems and Methods for Fuel Control During Cold Starts
System and Method for Controlling Torque Output of an Engine When a Water Pump Coupled to the Engine Is Switched on or Off
Method and Apparatus for Managing Charge Depletion in a Plug-in Hybrid Vehicle
Electric Machine with Fractional Slot Windings
Application:
13/715,047 →
Publication:
US US20140167547A1
System and Method for Controlling Regeneration Within an After-Treatment Component of a Compression-Ignition Engine
Refrigeration Compositions, Refrigeration Systems and Methods of Making, Operating and Using the Same
Application:
13/715,353 →
Publication:
US US20140165631A1
Systems and Methods for Detecting a Weak Subdivision in a Battery System
Parking Assist System
Method for Operating a Driver Assistance System and Driver Assistance System
Method and a Device for Generating Artificial Driving Noises of a Vehicle
Towing Device for Motor Vehicles and Method for Towing a Motor Vehicle
Application:
13/716,048 →
Publication:
US US20130173086A1
Engine Control Systems and Methods for Vehicle Launch
Method of Operating a Hybrid Powertrain
Design for Manufacturing/Assembly of a Fuel Distributor Assembly
Fuel Control Systems and Methods for Cold Starts of an Engine
Method of Coating a Chrome Plated Part
Application:
13/716,955 →
Publication:
US US20140170419A1
Hydraulic Control for a Vehicle Powertrain
Application:
13/717,102 →
Publication:
US US20130232962A1
Containment Assembly for Flowable Materials
Variable Pem Fuel Cell System Start Time to Optimize System Efficiency and Performance
Application:
13/717,434 →
Publication:
US US20140170514A1
Wind Deflector
Methods and Systems for Determining Whether a Voltage Measurement Is Usable for a State of Charge Estimation
Reversible Battery Assembly and Tooling for Automated High Volume Production
Module Mounting and Structure with Adaptor Plate
Method for Mitigating Recoverable Voltage Loss Through Humidification Control
Application:
13/720,200 →
Publication:
US US20140170512A1
Gasbag for a Personal Protection Device
Systems and Methods for Measuring High Frequency Resistance in a Fuel Cell System
Remote Laser Welding
Application:
13/721,434 →
Publication:
US US20140175068A1
Methods for Informing a Motor Vehicle Driver of a Driving Maneuver, a Driver Assistance System for a Motor Vehicle That Utilizes the Method, and a Motor Vehicle Having the Driver Assistance System
Application:
13/722,404 →
Publication:
US US20130179023A1
Methods and Systems for Bypassing Authenticity Checks for Secure Control Modules
Extendible and Pivotable Bicycle Rack
Battery Module for an Electric Vehicle, and Method of Assembly Thereof
Method and System for Thermal Storage in a Vehicle
Application:
13/724,328 →
Publication:
US US20140174707A1
Unique Pre-Form Design For Two-Step Forming Of Stainless Steel Fuel Cell Bipolar Plates
Turbo Wheel And Shaft Assembly
Application:
13/724,943 →
Publication:
US US20140178188A1
Motor Vehicle Body with Reinforcing Structure
Method and System for Detecting Proximity of an End Device to a Vehicle Based on Signal Strength Information Received Over a Bluetooth Low Energy (Ble) Advertising Channel
Method to Diagnose Fuel Cell Humidification Problems
Method and Apparatus for Controlling a Combined Heating and Cooling Vapor Compression System
Top Mount's High Performance Main Resilient or Elastomeric Element
Top Mount, Integrated Housing and Strut Spring Bearing
Top Mount with Mcu Isolator in Inner Metal
Top Mount for Strut
Method of Distributing Processor Loading Between Real-Time Processor Threads
Clutch Backing Plate with Fluid Drain
Compound Planetary Front Wheel Drive Continuously Variable Transmission
Seal Aligning and Retaining Assembly and Method of Retaining a Seal
Application:
13/734,408 →
Publication:
US US20140042704A1
Detachable Positioning and Reinforcement Structure and Method of Disassembling a Front End Assembly for a Vehicle
Vehicle Headlamp Assembly and Method of Installing a Vehicle Headlamp Assembly
Fuel Cell Bipolar Plate Exit for Improved Flow Distribution and Freeze Compatibility
Hood Assembly for a Vehicle and Method of Aligning Front End Assembly Components for a Vehicle
Integrated Hood Latch Keeper for a Grill Opening Reinforcement Structure
Hybrid Electric Vehicle Particulate Regeneration Method and System
Ducted Seat for a Vehicle
Method and System for Tensioning Park Brake Cables
Multi-Section Cargo Cover
Coolant Activated Rechargeable Energy Storage System Drain Plug
Application:
13/736,197 →
Publication:
US US20140190568A1
Deflection Sensitive Coolant Activated Drain Plug Detection System for High Voltage Battery Packs
Driver Display of Energy Consumption as a Monetary Rate
Systems and Methods to Capture and Utilize Temperature Information in a Battery System
Engine Cradle with Deflector Device
Multi-Speed Transmission
Efficient Partition Refinement Based Reachability Checking for Simulinks/Stateflow Models
Application:
13/737,227 →
Publication:
US US20140195208A1
Counter-Example Guided Abstraction Refinement Based Test Case Generation From Simulink/Stateflow Models
Application:
13/737,237 →
Publication:
US US20140195209A1
Structural Composite Panel with Metallic Foam Core
Locking Device for Cooling Fan Assembly
Headliner Edge Treatment
Hybrid Powertrain Input Torque Management
Vehicle Door Latch System and Method
Stator Winding Diagnostic Systems and Methods
Structure, Method of Making a Structure, and Method of Reducing Galvanic Corrosion
Energy Absorbing Shield and System for Small Urban Vehicles
Head Restraint for a Vehicle Seat
Rear Wheel Suspension
Battery Section Balancing Methods and Systems
Outside Air Temperature Correction for a Vehicle
Patent:
8,744,658 →
Application:
13/740,703 →
Vehicle Exterior Door Handle Lighting
Retentioin Feature for Automotive Deco Trim
Patent:
8,615,962 →
Application:
13/740,935 →
Positioning and Reinforcement Structure for a Vehicle
Integrated Vehicle Structure and Power-Plant Exhaust
Method of Integrally Forming Ribs in a Composite Panel
Application:
13/741,417 →
Publication:
US US20140196837A1
Method of Fabricating a Hole in a Composite Panel
Application:
13/741,418 →
Publication:
US US20140197569A1
Method of Isolating Metallic Fasteners in Composite Panels
Method of Assembling a Front End Assembly of a Vehicle
Sealing Device
Application:
13/741,570 →
Publication:
US US20130192142A1
Leak and Blockage Diagnostic Systems and Methods
Method and Apparatus of Using Separate Reverse Channel for User Input in Mobile Device Display Replication
Transient Inlet Relative Humidity Estimation Via Adaptive Cathode Humidification Unit Model And High Frequency Resistance
Vehicle Door Latch System and Method
Application:
13/741,889 →
Publication:
US US20140200774A1
Noise Control of Thermal Components in a Hybrid Electric Vehicle
Automatic Transmission Synchronous Gear Shift
Return Air Ducts for Vehicles
Application:
13/742,726 →
Publication:
US US20140196866A1
Method for Controlling a Thermal Storage Heat Pump System
Seat with Side Airbag Guide Chute
Stabilization of a Vehicle Combination
Stabilization of a Vehicle Combination
Application:
13/742,965 →
Publication:
US US20130191000A1
Integrated Travel Services
Multi-Speed Transmission
Anti-Rotate Attenuation Device
Low Mass Planetary Carrier and Clutch Housing
Patent:
8,628,449 →
Application:
13/743,994 →
Motor Vehicle Body
Motor Vehicle with Water Box Cover
Transmission with Radially Stacked Gear Sets Including Annular Gear
Transmission with Double-Sun, One Ring, and Double-Annular Gear Coplanar Gear Set
Transmission with Double-Sun, Annular Gear, and Outer Gear Coplanar Gear Set
Transmission with Double-Annular Gear Coplanar Gear Set
Transmission for a Vehicle
Transmission for a Vehicle
Transmission for a Vehicle
Application:
13/745,006 →
Publication:
US US20140202279A1
Vehicle
Electromagnetic Interference Reduction Assembly for a Transmission of a Vehicle
Ultrathin Surface Coating on Negative Electrodes to Prevent Transition Metal Deposition and Methods for Making and Use Thereof
Brace for the Outer Skin Reinforcement for a Sheet Metal Outer Skin of a Motor Vehicle
Motor Vehicle Headlamp
Application:
13/745,209 →
Publication:
US US20130188374A1
Adjusting Device for Adjusting a Motor Vehicle Seat, Motor Vehicle Seat, Motor Vehicle and Method for Adjusting a Motor Vehicle Seat
Application:
13/746,065 →
Publication:
US US20130187425A1
Adjusting Device for Adjusting a Motor Vehicle Seat, Motor Vehicle Seat, Motor Vehicle and Method for Adjusting a Motor Vehicle Seat
Application:
13/746,071 →
Publication:
US US20140028070A1
Lift and Roll Load System
Self-Motivated Cargo Pod
Electric Vehicle Mobile Host System - Load, Lockdown and Charging
Big Wheel Cargo Module
Application:
13/746,183 →
Publication:
US US20140205418A1
Selectively Reacting to the Minimum Cell Voltage Drop Rate in a Fuel Cell System
Efficient Data Flow Algorithms for Autonomous Lane Changing, Passing and Overtaking Behaviors
Electric Vehicle Charge-Related Information Processing and Display
Adjustment Device for Adjusting a Motor Vehicle Seat, Motor Vehicle Seat, Motor Vehicle and Method for Adjusting a Motor Vehicle Seat
Application:
13/746,537 →
Publication:
US US20130187423A1
Methods for Sand Core Gas Evacuation and Related Systems and Apparatus
Cable-operated actuating device for a motor vehicle
Half-Tilt Bed Unloading System
Selectable One-Way Torque Transmitting Device Using Control Rail
Methods and Systems for Controlling Steering Systems of Vehicles
Systems and Methods for Evaluating and Controlling a Battery System
Expandable Vehicle Systems
Application:
13/747,512 →
Publication:
US US20130240274A1
Clamshell Acoustic Insulator Assembly for a Passenger Compartment of a Vehicle
Patent:
8,740,293 →
Application:
13/747,518 →
Adjusting Device for Adjusting a Motor Vehicle Seat, Motor Vehicle Seat, Motor Vehicle and Method for Adjusting a Motor Vehicle Seat
Coolant Loss Detection And Remediation In A Liquid Cooled Battery Pack
Damped Offload System
Application:
13/748,137 →
Publication:
US US20140205410A1
Seat Arrangement, Vehicle Seat, Motor Vehicle and Method for Folding a Vehicle Seat
Application:
13/748,192 →
Publication:
US US20130193734A1
Multi-Speed Transmission
Dynamic Projection Method for Micro-Truss Foam Fabrication
Application:
13/748,711 →
Publication:
US US20130135599A1
Adjustment System, Vehicle Seat, Vehicle and Method Therefor
Method for Online Detection of Liner Buckling in a Storage System for Pressurized Gas
Module for Packages
Application:
13/749,220 →
Publication:
US US20140203693A1
Methods and Systems for Diagnosing a Vehicle
Turbine Housing
Steering System for an Autonomously Driven Vehicle and Methods of Steering the Same
Application:
13/750,408 →
Publication:
US US20140214256A1
Vehicle Heat Pump System and Method Utilizing Thermal Storage
Vehicle Heat Pump System and Method Utilizing Intermediate Gas Recompression
Method for Coating Stator and Motor Winding Welded Tips with Common Insulating and Varnishing Resin
Application:
13/750,438 →
Publication:
US US20140209018A1
Vehicle Sensor System
Multi-Speed Transmission
Multi-Speed Transmission
Multi-Speed Transmission
System and Method for Controlling Engine Torque to Prevent Driveline Bump During a Downshift When a Throttle Valve Is Closed
Partially Integrated Exhaust Manifold
Battery Target Temperature Methods and Systems
Elastic Insert Alignment Assembly and Method of Reducing Positional Variation
Application:
13/752,449 →
Publication:
US US20140208572A1
Dimensional Centering Structure for a Vehicle and Method of Establishing a Dimensional Reference Datum
Gravity-Fed Curb Side Dispenser
Application:
13/754,066 →
Publication:
US US20140212253A1
Wiper Apparatuses, Motor Vehicles Having Wiper Apparatuses, and Methods for Operating Wiper Apparatuses
Sensor Arrangement and Method of Using the Same
Automatic Transmission with Integrated Engine Starter, Remote Mounted Pump and Drive System
Transmission Hydraulic Control System Having an Accumulator
Transmission Hydraulic Control System Having an Accumulator
Transmission Hydraulic Control System Having an Accumulator
Multi-Speed Transmission Having Three Planetary Gear Sets
Elastic Alignment Assembly for Aligning Mated Components and Method of Reducing Positional Variation
Adaptive User Guidance for Navigation and Location-Based Services
Method to Detect Open-Circuit Voltage Shift Through Optimization Fitting of the Anode Electrode Half-Cell Voltage Curve
Application:
13/756,327 →
Publication:
US US20140214347A1
Validation Method for Pressure Sensor Signal at Electrical Controlled High Pressure Gas Storage Systems
Method and Apparatus for Controlling an Electric Motor Employed to Power a Fluidic Pump
Multi-Speed Transmission Gear and Clutch Arrangement
Vehicle Brake Cooling System
Patent:
8,678,426 →
Application:
13/756,582 →
Method and Apparatus for Remote Object Sensing Employing Compressive Sensing
Combined Subgasket and Membrane Support
Method and Apparatus for Detecting a Desaturation Fault in an Inverter Module
Throttle Control Systems and Methods for Reducing Induction Noise
Method and Apparatus for Providing Information Related to an in-Vehicle Function
External Egr Rate Feedback
System and Method for Cooling a Fuel Cell-Powered Vehicle
Automotive Vehicle Container Handling System
Shared Swappable Energy Module
Cargo Deployment System
Application:
13/757,278 →
Publication:
US US20140205392A1
Sliding Winch Lift System
Application:
13/757,280 →
Publication:
US US20140219752A1
Doorframe Gantry Lift System
Powered Curb Ramp Tugger Lift
Direct Formation of a Separator with a Protective Edge on an Electrode
Method For Automatic Quantification Of Dendrite Arm Spacing In Dendritic Microstructures
Multi-Circuited Vehicular Thermal Management System and Method
Stationary Hydraulic Lash Adjuster and Roller Finger Follower Assembly Clip, and Method Thereof
Instrumental Panel Support Structure
Seal Retention Assembly and a Seal
Seal for Pem Fuel Cell Plate
Method For The Detection Of Fuel Cell System Short Circuits
Sensor Integrated Glass Bulb Temperature Pressure Relief Device Design for Hydrogen Storage Systems
Method and Apparatus for on-Board/Off-Board Fault Detection
Transmission-Integrated Electromechanical Device
Transmission with Dog Clutch Brake
Fuel Module with Electrostatic Discharge Mitigation
Biometric Data-Driven Application of Vehicle Operation Settings
Heat Generation System for Determining a Selective Catalytic Reduction Device Efficiency
System and Method for Preventing Stochastic Pre-Ignition
Scalable High Voltage Charging and Detection System for Plug-in Electric Vehicles
Hybrid Powertrain
Patent:
8,556,758 →
Application:
13/761,424 →
Linear Alternator Assembly with Four-Stroke Working Cycle and Vehicle Having Same
Heat Stake Joining of Adhesively Bonded Thermoplastic Components
Wheel House Liner with Hemmed Edge, and System and Method of Manufacturing Thereof
Impact Resistant Article
Application:
13/761,471 →
Publication:
US US20140216852A1
Clamped Liner-Boss Connection
Estimating Congnitive-Load in Human-Machine Interaction
Application:
13/761,541 →
Publication:
US US20130325482A1
Interior Permanent Magnet Machine
Turbocharger Flow Control
Active Noise Control System and Method
Modular Wiring Harness Testing Systems and Apparatus
Dimpled Surface Features for Radiated Noise Attenuation in Engine Front Covers
System and Method for Cooling Annealed Panels
Application:
13/764,224 →
Publication:
US US20140223982A1
Turbo Charger Compressor With Integrated Back Plate And Bearing Housing
Method and Apparatus for Controlling Motor Torques in a Multi-Mode Powertrain System
Application:
13/765,028 →
Publication:
US US20140228166A1
Trailer Reverse Assist Control
Application:
13/765,122 →
Publication:
US US20140229070A1
Solderless Hose Connection for a Line Section of an Air Conditioning System
Virtual Model Merging Systems and Methods
Application:
13/766,252 →
Publication:
US US20140207434A1
Automatic Transmission Input Clutch Control
Time Domain Reflectometry System and Method
Application:
13/767,384 →
Publication:
US US20130221974A1
Overload Protection for Shape Memory Alloy Actuators
Application:
13/767,550 →
Publication:
US US20140225708A1
Active Material Actuation Utilizing Tunable Magnetic Overload Protection
Transmission Sump Level Control System
Hemispherical Joint for Composite Material Joining
Patent:
8,747,015 →
Application:
13/767,912 →
Method of Monitoring Performance of an Electric Motor
Method for Controlling a Compressor of a Thermal Storage Heat Pump System
Application:
13/767,918 →
Publication:
US US20140230463A1
Dual Path Sair for Dual Plane Integrated Exhaust Manifolds
Tuned Vibration Damped Device
Application:
13/768,272 →
Publication:
US US20140231195A1
System and Method for Exhaust Gas Aftertreatment
Active Hood Extractor
Application:
13/768,301 →
Publication:
US US20140231161A1
Team-Oriented Hvac System
Adaptive Vehicle Cruise Control System
Application:
13/768,515 →
Publication:
US US20130219294A1
System and Method for Auto-Correcting an Autonomous Driving System
Systems and Methods for Charging Multiple Vehicle Rechargeable Energy Storage Systems
Side Member for a Rear Frame of a Vehicle Body
Method for Resistance Welding with Pre-Chilling
Application:
13/769,457 →
Publication:
US US20140231396A1
Multi-Speed Transmission Having Three Planetary Gear Sets
Multi-Speed Transmission Having Three Planetary Gear Sets
Object Retention on Interior Vehicular Components Utilizing Coded Magnets
Active Material Actuation Utilizing Bi-Stable Mechanical Overload Protection
Integrated Interlock Feature for Overmolded Coil and Bobbin
Plastic Forming Method
Application:
13/771,230 →
Publication:
US US20130218544A1
Methods and Apparatus for Determining Abnormal Conditions in Vehicular Electrical System
Passive Temperature Supervision Device for a Compressed Gas Fuel Tank
Method for Predicting Reactive Clutch Loads and Preemptively Adjusting Line Pressure
Patent:
8,706,371 →
Application:
13/772,667 →
Transmission Assembly with Integrated Motor Position Sensor
Multi-Speed Planetary Gear Set Transmission
Reinforcement Part for a Roof Side Member
Compression Fill of Anode of a Fuel Cell System
Elastic Structure for Use in an Energy Absorption System of a Motor Vehicle as Well as Energy Absorption System as Occupant Protection and/or Pedestrian Protection
Cerium Based Permanent Magnet Material
Application:
13/773,935 →
Publication:
US US20130160896A1
Vehicle and a Window Visor Assembly for the Vehicle
Buckle Assembly with Light Emitting Diode and Optical Guide
Blow Molded Assembly with an Attachment Fastener Portion, and Method Thereof
Method of Controlling Data Communication Between a Vehicle and Heterogeneous Wireless Networks
Hybrid Vehicle with Power-Split and Parallel Hybrid Transmission and Method of Controlling Same
Multi-Speed Planetary Gear Set Transmission
System and Method to Improve Control Module Reflash Time
System and Method for Detecting Stochastic Pre-Ignition
System and Method for Limiting a Volumetric Efficiency of an Engine During Engine Cranking to Reduce Emission
Activation Of Safety Mechanisms Using Smart Materials
Method and Device for Determining a Radiation Characteristic for an Illumination Device of a Vehicle
System and Method for Creating an Image with a Wide Dynamic Range
Combustion System for an Engine Having a Swirl Inducing Combustion Chamber
Exhaust Gas Recirculation System
Application:
13/776,770 →
Publication:
US US20140238363A1
Engine Having Pcv Separator Inlet Shielded by Head Gasket Geometry
Method of Making a Motor Housing Assembly
Integrated Anti-Theft Device for an Electric Bicycle
Device for Fastening a Lamp of a Motor Vehicle to Its Body
Locking Device, Adjustment Device, Motor Vehicle Seat, Motor Vehicle as Well as Related Method
Application:
13/777,148 →
Publication:
US US20130234488A1
Device for Accommodating Sensors in a Motor Vehicle
Application:
13/777,151 →
Publication:
US US20130241721A1
Driver Assistance System
Application:
13/777,157 →
Publication:
US US20130245894A1
Ambient Lighting Jig Assembly and Method
Vehicle and a Compression Load Limiter Assembly for the Vehicle
Coaxial Gear System
Welding Electrode with Contoured Face
Engine Accessory Mount For Improved Stretch Belt Installation
METHOD FOR REGISTRATION OF RANGE IMAGES FROM MULTIPLE LiDARS
Systems and Methods for Control of a Current Interruption Component in a Battery System
Electric Drive with Reconfigurable Winding
Application:
13/777,572 →
Publication:
US US20140239876A1
Method and System for Adjusting Performance Based on Vehicle Occupants
Lithium Ion Battery
Application:
13/778,968 →
Publication:
US US20140242452A1
Driver Monitoring Camera System
Input Device
Application:
13/779,229 →
Publication:
US US20130241895A1
Traffic Information System
Application:
13/779,244 →
Publication:
US US20130242098A1
Motor Vehicle with an Adjustable Loading Panel in a Cargo Space
Method for manufacturing profiled strips and hollow profiled bodies and a device for implementing the method
Application:
13/779,283 →
Publication:
US US20130234358A1
Transmission Wheel Arrangement
Method and Apparatus for Managing Speeds in a Multi-Mode Transmission
Light diffuser for a headlamp
Application:
13/780,768 →
Publication:
US US20130258696A1
Device for Fastening a Compressible Areal Structure to a Body Part of a Vehicle
Connecting Part for Connecting a Bumper Covering on a Vehicle Body, Vehicle Body as Well as Method for Assembling a Bumper Covering on a Vehicle Body
Emergency Drainage Device for Enclosed Compartments
Protective Device for a Motor Vehicle
Positive Crankcase Ventilation System
Guide Loops for a Seat Belt System
Reconfigurable Gripping Device
Optimum Rotor Skew Angle for an Electric Machine
Application:
13/782,320 →
Publication:
US US20140246943A1
Method of Establishing Communication Between Devices in a Vehicle
Adjusting Device for a Vehicle Seat, Vehicle Seat, Row of Seats,Vehicle Seat and Method for This
Multi-Speed Transmission with a Series Disconnect Clutch
Multi-Speed Transmission with a Selectable One-Way Clutch
Patent:
8,702,555 →
Application:
13/782,669 →
Vehicle Seat, Vehicle and Method for Adjusting a Vehicle Seat
Arm Rest Arrangement for a Motor Vehicle
Internal gear shift for a manual transmission and manual transmission for a motor vehicle
Application:
13/782,705 →
Publication:
US US20130239729A1
Method of Resistance Spot Welding Aluminum Alloy Workpieces
System for De-Aerating Fluid in a Transmission
Integrated Lighting, Camera and Sensor Unit
Application:
13/784,375 →
Publication:
US US20140247349A1
Positive Crankcase Ventilation System
Transmission Oil Pressure Control During Engine Autostart
Anti-Unlocking Device for Adjustable Steering Column
Patent:
8,794,671 →
Application:
13/785,431 →
Positive Crankcase Ventilation System for a Two-Cylinder Engine
Mechanical Lifter
Hemmed Fuel Cell Stack Enclosure
Input Device
Motor Vehicle with Radiator Tank Assembly
Surface Coating Method and a Method for Reducing Irreversible Capacity Loss of a Lithium Rich Transitional Oxide Electrode
Vehicle Lane Determination
Application:
13/785,909 →
Publication:
US US20140257686A1
Cerium-Iron-Based Magnetic Compounds
Engine Valve Position Sensing Systems and Methods
Exhaust Gas Recirculation Control Systems and Methods
Tuned Hinge
Application:
13/787,078 →
Publication:
US US20140250631A1
Steering-Wheel-Hold Detection for Lane Keeping Assist Feature
System and Method for Controlling a Low Pressure Pump to Prevent Vaporization of Fuel at an Inlet of a High Pressure Pump
Split Electronic Transmission Range Selection Systems and Methods
System and Method for Controlling an Engine in a Bi-Fuel Vehicle to Prevent Damage to a Catalyst Due to Engine Misfire
Electrical Charging System Alarm for a Vehicle Charge Cord with Automatic Shutoff
Remote Start for Manual Transmissions
BAYESIAN NETWORK TO TRACK OBJECTS USING SCAN POINTS USING MULTIPLE LiDAR SENSORS
METHODS AND APPARATUS OF FUSING RADAR/CAMERA OBJECT DATA AND LiDAR SCAN POINTS
Keyless/Grooveless Foil Bearing with Fold Over Tab
System and Method for Controlling a Cooling System of an Engine Equipped with a Start-Stop System
Oil Pump Control Systems and Methods for Noise Minimization
Interior Permanent Magnet Machine Having a Mixed Rare Earth Magnet and Ferrite Magnet Rotor
Systems and Methods for Maintaining a Substantially Stable Engine Idle Speed After a Garage Shift
Emission System and Method of Selectively Directing Exhaust Gas and Air Within an Internal Combustion Engine
Powertrain Architecture-Powersplit Hybrid Using a Single Motor
Patent:
8,696,512 →
Application:
13/791,884 →
Adaptable Framework for Ontology-Based Information Extraction
Application:
13/792,913 →
Publication:
US US20140258304A1
Pedestrian Alert System for a Motor Vehicle
Pass-Through Element for a Motor Vehicle Front of Dash System
Multi-Speed Transmission
Fuel Cell Power Control by Offset Estimation
System and Method of Executing a Double Transition Shift in a Transmission with Transitioning Clutch Having Opposite Clutch Slip and Torque Carrying Directions
Automotive Rear Suspension Subassembly
Support Mechanism for a Vehicle Closure Panel
Expressive Vehicle Lighting Assembly
Vehicle Suspension Systems
Inverter Control Method and Vehicle Having Same
Battery State-Of-Charge Estimation For Hybrid And Electric Vehicles Using Extended Kalman Filter Techniques
Micro-Channel Cooling Fin Design Based on an Equivalent Temperature Gradient
Elastically Deformable Conduit Assembly and Method of Fittingly Retaining Wires
Adjusting Device, Motor Vehicle Seat, Motor Vehicle and Method for This
Adjusting Device, Vehicle Seat and Motor Vehicle and Method for This
Application:
13/797,424 →
Publication:
US US20130291676A1
Vehicle Seat for a Motor Vehicle
Application:
13/797,441 →
Publication:
US US20130278036A1
Motor Vehicle with an Adjustable Loading Panel in a Cargo Space
Welding a Joint
SYNTHESIS OF ORDERED L10-TYPE FeNi NANOPARTICLES
Cylinder Deactivation Pattern Matching
Communication Device, Method and Vehicle
Application:
13/798,362 →
Publication:
US US20130324088A1
Torque Converter Clutch Slip Control Systems and Methods Based on Active Cylinder Count
Cylinder Control Systems and Methods for Discouraging Resonant Frequency Operation
Air Mass Determination for Cylinder Activation and Deactivation Control Systems
System and Method for Deactivating a Cylinder of an Engine and Reactivating the Cylinder Based on an Estimated Trapped Air Mass
Air Per Cylinder Determination Systems and Methods
System and Method for Controlling a Firing Sequence of an Engine to Reduce Vibration When Cylinders of the Engine Are Deactivated
Intake Port Pressure Prediction for Cylinder Activation and Deactivation Control Systems
Volumetric Efficiency Determination Systems and Methods
System and Method for Controlling a Firing Sequence of an Engine to Reduce Vibration When Cylinders of the Engine Are Deactivated
Cylinder Activation and Deactivation Control Systems and Methods
System and Method for Controlling Spark Timing When Cylinders of an Engine Are Deactivated to Reduce Noise and Vibration
Intake Runner Temperature Determination Systems and Methods
Systems and Methods for Controlling Cylinder Deactivation Periods and Patterns
Recursive Firing Pattern Algorithm for Variable Cylinder Deactivation in Transient Operation
System and Method for Randomly Adjusting a Firing Frequency of an Engine to Reduce Vibration When Cylinders of the Engine Are Deactivated
Liquid-Cooled Battery Module
Powered Vehicle Brake Cooling System
Membrane Electrode Assemblies and Fuel-Cell Systems with Surface-Modified Electrocatalysts and Methods for Electrocatalyst Surface Modification
System and Method for Controlling a Firing Pattern of an Engine to Reduce Vibration When Cylinders of the Engine Are Deactivated
System and Method for Controlling a Firing Sequence of an Engine to Reduce Vibration When Cylinders of the Engine Are Deactivated
Cylinder Activation/Deactivation Sequence Control Systems and Methods
Method of Manufacturing Electrical Circuit Traces
Motor Vehicle with Sensors Arranged on a Pivoting Device
Vehicle Seat for a Motor Vehicle
Multi-Speed Transmission with an Integrated Electric Motor
High Voltage Module with Circuit Breaker for Motor Vehicles
Vehicle Communications System and Method
Thermal Pressure Relief Devices and Related Systems and Methods
Piston Pinbore Bushing With Anti-Rotation Feature
Application:
13/801,629 →
Publication:
US US20140260961A1
Method and Apparatus for Evaluating a Rechargeable Battery
Intuitive Grasp Control of a Multi-Axis Robotic Gripper
Electric Motor
Extended-Range Electric Vehicle with Supercapacitor Range Extender
Adaptable Bin with Moveable Shelf
Adaptable Bin with Collapsible Secondary Bin
Cell Retention Design and Process
Application:
13/803,098 →
Publication:
US US20140272662A1
Primary Controller Designation in Fault Tolerant Systems
Dry Sump Scavenge Pump System With Balance Shaft Capability For Application To Flat Plane V8 Engines
Application:
13/803,475 →
Publication:
US US20140261281A1
Method and System for Determining a Battery Element Voltage
Method and System for Estimating Voltage of a Battery Element
System and Method for Controlling Airflow Through a Ventilation System of an Engine When Cylinders of the Engine Are Deactivated
Floor Structure of a Motor Vehicle Body
Fuel Supply System for Internal Combustion Engine and Methods of Using the Same
Coolant Control Systems and Methods for Warming Engine Oil and Transmission Fluid
Method for Improving Engine Performance Using a Temperature Managed Fuel System
Vehicle Procession Control Through a Traffic Intersection
Steering System for an Autonomously Driven Vehicle and Methods of Steering the Same
Electrode for a Lithium-Based Secondary Electrochemical Device and Method of Forming Same
Application:
13/826,168 →
Publication:
US US20140272558A1
Robotic Finger Assembly
Door System
Adhesive Joint for Joining Panels
Application:
13/826,290 →
Publication:
US US20140272317A1
System and Method for Sampling and Processing Mass Air Flow Sensor Data
Battery Module for Mitigating Gas Accumulation and Methods Thereof
System and Method for Improving Sensor Visibility of Vehicle in Autonomous Driving Mode
Patent:
8,798,841 →
Application:
13/827,745 →
Squeeze Clip Ground Strap
Porous Separator for a Lithium Ion Battery and a Method of Making the Same
Application:
13/828,352 →
Publication:
US US20140272526A1
Steering Device with Electrical Steering Gear and Method for Controlling of Same
Anodes Including Mesoporous Hollow Silicon Particles and a Method for Synthesizing Mesoporous Hollow Silicon Particles
Procedure and Monitoring Device for Supervising an Enterprise of a Vehicle
Application:
13/828,838 →
Publication:
US US20130325204A1
Device for Operating a Motor Vehicle
Application:
13/828,915 →
Publication:
US US20130328391A1
Method for operating functions of a vehicle and corresponding device
Application:
13/828,957 →
Publication:
US US20130328802A1
Estimating Coolant Conductivity in a Multi-Voltage Fuel Cell System
Sealing Design for Stamped Plate Fuel Cells
Noise Updating Systems and Methods
Fault Diagnostic Systems and Methods Using Oxygen Sensor Impedance
Method for Pre-Lithiation of the Negative Electrode in Lithium Ion Batteries
System and Method for Controlling an Operating Frequency of a Purge Valve to Improve Fuel Distribution to Cylinders of an Engine
System and Method for Diagnosing Flow Through a Purge Valve Based on a Fuel System Pressure Sensor
Adaptive Cruise Control System and Method Incorporating Regenerative Braking and Start-Stop Functions
Cathode Composite Structure and Methods Thereof for Improved Fuel Cell Performance Under High Humidity
Application:
13/832,984 →
Publication:
US US20140261981A1
Simultaneous Coating of Fuel Cell Components
Phaser Control Systems and Methods for Balancing Mean Effective Pressure
Direct Coated Membrane Electrode Assembly On External Reinforcement For Fuel Cells
MANUFACTURABILITY OF ePTFE LAMINATED MEMBRANES
Aluminum Alloy Suitable for High Pressure Die Casting
Cellular Offloading System for Vehicles Approaching Access Points
Integrating in-Vehicle Access-Point with Cellular Offloading System
Rejuvenation Control of Palladium-Only Diesel Oxidation Catalyst
Active Material Elements Having Reinforced Structural Connectors
Vehicle Suspension Systems
Dynamic Rearview Mirror Display Features
Application:
13/835,741 →
Publication:
US US20140114534A1
A Method of Handling Large Format Battery Cells for High Speed Assembly
Methods of Priming Thermally Activated Active Material Elements
Application:
13/835,931 →
Publication:
US US20130205770A1
Single-Lithium Ion Conductor as Binder in Lithium-Sulfur or Silicon-Sulfur Battery
Electrolyte Additives for Lithium Sulfur Rechargeable Batteries
Coating for Separator or Cathode of Lithium-Sulfur or Silicon-Sulfur Battery
Output Device for Issuing a Warning Notice
Application:
13/836,252 →
Publication:
US US20130328676A1
Active Material Actuator Having a Magnetorheological Overload Protector
Method for Displaying a Recommended Cornering Speed in a Vehicle and Driver Assistance System
Application:
13/836,296 →
Publication:
US US20130328699A1
Imaging Surface Modeling for Camera Modeling and Virtual View Synthesis
Low Mass Truck End Gate Utilizing Aluminum Stampings and Extrusions
Reinforced Electrode Assembly
Stratified Charge Engine with Turbocharger
Dual Function Electronic Control Unit
Porous, Amorphous Lithium Storage Materials and a Method for Making the Same
Electrical-Mechanical Fastening Device for Motor Vehicles
Application:
13/838,190 →
Publication:
US US20140057501A1
Porting System for a Turbo-Charged Loop Scavenged Two-Stroke Engine
Hybrid Vehicle and Method of Braking by Controlling an Exhaust Heat Recovery Device Bypass Valve on a Hybrid Vehicle
Methods for Generating Gear Teeth of a Double Involute Pinion-Face Gear Drive System
Balanced Snap Ring
Systems and Methods for Predicting Polarization Curves in a Fuel Cell System
Multi-Speed Transmission
System and Method for Reducing Steering Wheel Vibration in Electronic Power Steering Systems
Underhood Heat Absorber
Application:
13/840,230 →
Publication:
US US20140265997A1
Vehicle Front Suspension Lower Control Arm Attachment System
Methods, Systems and Apparatus for Steering Wheel Vibration Reduction in Electric Power Steering Systems
Weld Face Design for Spot Welding
Method for Operating Hybrid Vehicle
Wide Fov Camera Image Calibration and De-Warping
Application:
13/843,978 →
Publication:
US US20140085409A1
Remedial Actions for Air Flow Errors in a Fuel Cell System
Fcs Overall Efficiency by Using Stored Cathode Oxygen During Down-Transients
Tabbed Separation Clutch Plate
Technique for Production of Ammonia on Demand in a Three Way Catalyst for a Passive Selective Catalytic Reduction System
Spring Pack for a Transmission
Multi-Speed Transmission
Gear Engagement Mechanism
Cantilever Spring Type Detent Assembly
Crankshaft for Variable Displacement Internal Combustion Engine
Compact Exhaust Gas Treatment Systems for Diesel Applications
Patent:
8,778,290 →
Application:
13/848,109 →
Multi-Speed Transmission
Exhaust Aftertreatment System for Internal Combustion Engine
Multi-Speed Transmission
Multi-Speed Transmission
Method and Apparatus for Forming a Matrix Liner for a Pressure Vessel
Binary and Friction Clutch Assembly
Hybrid Powertrain
Multi-Directional Asymmetric Surfaces for Housings and Housing Covers and Internal Combustion Engines Comprising the Same
Application:
13/850,682 →
Publication:
US US20140020649A1
Engine Assembly Having a Baffle in the Intake Manifold
Elastically Averaged Alignment System
Drink Container Stabilizer
Application:
13/852,305 →
Publication:
US US20140291281A1
Co(Ii)Tetramethoxyphenylporphyrin Additive to Pfsa Pems for Improved Fuel Cell Durability
Torsion Axle Assembly with Connection Node Component
Energy Absorbing Headlamp Assembly and a Resettable Headlamp Assembly
Vehicle Fascia with Integral Energy Absorber
Decklid Hinge Assembly for a Vehicle
Method of Calculating Cpu Utilization
Application:
13/853,106 →
Publication:
US US20140298074A1
Systems and Methods for Configuring a Fuel Cell Having Lower Coolant Path Isolation Resistance
Application:
13/854,821 →
Publication:
US US20140295312A1
Elastic Averaging Alignment System, Method of Making the Same and Cutting Punch Therefor
Application:
13/855,928 →
Publication:
US US20140298962A1
Clutch Pedal Assembly with Driver Selectable Load Assist
Application:
13/856,107 →
Publication:
US US20140298947A1
Exhaust Manifold
Apparatus and Methods for Providing Tailored Information to Vehicle Users Based on Vehicle Community Input
Application:
13/856,622 →
Publication:
US US20140303806A1
High Voltage Color Indicated Air Bags
Application:
13/856,676 →
Publication:
US US20140300091A1
Vehicle with Apparatus for Generating and Displaying a Predefined Light Pattern
Patent:
8,823,552 →
Application:
13/856,736 →
Elastic Retaining Assembly for Matable Components and Method of Assembling
Elastic Tubular Attachment Assembly for Mating Components and Method of Mating Components
Elastic Clip Retaining Arrangement and Method of Mating Structures with an Elastic Clip Retaining Arrangement
Application:
13/856,956 →
Publication:
US US20140298638A1
Elastically Deformable Flange Locator Arrangement and Method of Reducing Positional Variation
Thick Film Conductive Inks for Electronic Devices
Latching Clutch Control System
Removable and Stowable Head Restraint
Adaptable Bin with Folding Secondary Bin
Center Console Having a Rotating Holding Unit
Application:
13/858,153 →
Publication:
US US20140300125A1
Adaptable Bin with Rotating Cup Holder
Adaptable Bin with Retractable Cup Holder
Elastic Mating Assembly and Method of Elastically Assembling Matable Components
Vehicle Battery System Balancing Systems and Methods
Status Indicator System for a Vehicle Door Lock
Vehicle and a Hinge Assembly for a Storage Compartment of the Vehicle
Joining or Fastening Components Containing a Shape Memory Polymer
Elastic Retaining Arrangement for Jointed Components and Method of Reducing a Gap Between Jointed Components
Full Speed Lane Sensing with a Surrounding View System
Capacitive Communication Layer for Cell Integrated Battery Management System
Full Speed Lane Sensing Using Multiple Cameras
Method and Apparatus for Controlling a Multi-Mode Powertrain System
Collapsible Hood Bumper with Reset Feature
Speed-Based Flow Device Diagnostic System and Method
Increased Stiffness Underbody Panel
Energy Absorber System and Energy Absorber Thereof
Multilayer License Plate Lighting Apparatus
Application:
13/861,760 →
Publication:
US US20140307476A1
Series Cooled Module Cooling Fin
Application:
13/862,525 →
Publication:
US US20140308551A1
Simplified Fuel Cell Humidifier Design
Application:
13/862,872 →
Publication:
US US20140306359A1
Vibration Absorber
Driveline Clutch Variable Clutch Capacity Reapply, Shaping and Lash Management
Flow Controlled Electrically Assisted Dpf Regeneration
Application:
13/864,632 →
Publication:
US US20140311122A1
Acoustic Insulator Having a Tortuous Path
Application:
13/864,718 →
Publication:
US US20140311823A1
Underbody for a Motor Vehicle
Toroidal Traction Drive Transmission
Electrically Heated Doc Using Hcscr Cold Start Nox Controls
Application:
13/866,429 →
Publication:
US US20140311123A1
Methods and Systems for Managing Dialog of Speech Systems
Systems and Methods for Lock Notification
Systems and Methods for Location Based Customization
Real-Time Parking Assistant Application
Stacked Planetary Gear Set
Application:
13/867,492 →
Publication:
US US20140315679A1
Latching Clutch Control System
Shift Lever for a Transmission of a Motor Vehicle, the Shift Lever Havinga Blocking Connection
Application:
13/867,791 →
Publication:
US US20130291675A1
Method of Making Non-Rectangular Magnets
Video Display Monitoring Methods and Systems
Antenna Mast Detection Methods and Systems
Antenna Mast Detection Methods and Systems
Antenna Mast Detection Methods and Systems
Energy Dissipation System for Vehicles
Lubrication System Thermostat, and Method Thereof
Insulation System for an Electric Machine
Bar Wound Stator Winding Layout with Long-Pitched and Short-Pitched Coils
Engine with Pulse-Suppressed Dedicated Exhaust Gas Recirculation
Method and System of Controlling a Powertrain System to Reduce Turbo Lag in a Hybrid Vehicle
Patent:
8,731,762 →
Application:
13/869,317 →
Engine with Exhaust Gas Recirculation System and Variable Geometry Turbocharger
Systems and Methods to Monitor and Control a Flow of Air Within a Fuel Cell Stack
Method of Learning Engaged Positions and a Neutral Position of a Synchronizer Actuator Fork of a Dual Clutch Transmission
Patent:
8,831,845 →
Application:
13/870,030 →
Vehicle Tire and Wheel Assembly with Insulating Member
Application:
13/870,031 →
Publication:
US US20140319901A1
Prop Rod End Piece
Coil Retainer for Electric Machine Rotors
Packaged Vacuum Pump and Oil Pump, and System and Method Thereof
Application:
13/870,036 →
Publication:
US US20140321966A1
Exhaust Gas Recirculation Cooler, System, and Method Thereof
Vibration Absorber
Electrically Variable Transmission for a Hybrid Vehicle Using Flywheel Kinetic Energy Recovery
Side-Impact Energy Absorption Bracket
Aluminum Alloy Rotor for an Electromagnetic Device
Temperature Dependent Flow Control for Combustion Engine Piston Squirters
Connecting Rod
Method of Managing Available Operating States in an Electric Vehicle Powertrain
Methods, Program Products, and Systems Relating to Vehicular Garage Door Control Systems
Direction Selectable Sprag
Induction Hardening System and Method
Low Torque Ripple Electric Drive System for Bas Application
Application:
13/871,756 →
Publication:
US US20140319957A1
Adapter for an Oil Filler Neck and Assembly Method for the Adapter
Telematics for a Towed Vehicle
Method of Estimating a Variation of a Quantity of Soot Accumulated in a Diesel Particulate Filter
System and Method for Validating Adaptive Cruise Control Operations
Laser Welded Structural Fender Inner Blank for Mass Optimization
Application:
13/873,408 →
Publication:
US US20140062136A1
Strain Distribution Check Link Assembly
Methods and Systems of Making Fatigue Block Cycle Test Specifications for Components and/or Subsystems
Application:
13/873,937 →
Publication:
US US20140324377A1
Dialogue Models for Vehicle Occupants
Application:
13/874,002 →
Publication:
US US20130325483A1
Hybrid Vehicle with Flywheel and Electric Kinetic Energy System
Hydraulic Control System for an Automatic Transmission Having Analog Electronic Transmission Range Selection
Seven Speed Dual Clutch Transmission
Part Transfer System That Uses Existing Part Features, and a Method of Using the Part Transfer System
Vehicle Seat Assembly with Dual Locked Seating Positions and Method of Adjusting a Vehicle Seat
Systems and Methods for Controlling a Transmission During a Garage Shift
Shaft Coupling Assembly and Method
Electrical Connector Assembly for an Electronic Module
Manual Parking Brake with an Over-Center Helper Spring
Application:
13/877,611 →
Publication:
US US20140000406A1
Humid Stream Orifice via Geometry and Material That Is Robust to Becoming Blocked
Motor Vehicle with Water Chamber
Sealing Strip for a Motor Vehicle, in Particular Window Shaft Seal Strip
Multi-Speed Transmission
Systems and Methods for Estimating Fuel Cell States
Application:
13/889,147 →
Publication:
US US20140335432A1
Hybrid Powertrain and Modular Rear Drive Unit for Same
Soc Determination by Evaluation of Effects Invoked by Dimensional Changes of Battery Cells
Transmitting Charge Event Information to Electrical Utility Through Telematics Communication Infrastructure
Application:
13/889,911 →
Publication:
US US20140337253A1
Battery State Estimator Combining Electrochemical Solid-State Concentration Model with Empirical Equivalent-Circuit Model
Control Architecture for a Multi-Mode Powertrain System
Latching Clutch Valve Control System
Multi-Speed Transmission
Metallographic Method for Accurate Measurement of Pore Sizes and Distributions in Metal Castings
Vehicle, a Clip Assembly for the Vehicle, and a Method of Manufacturing the Clip Assembly
Patent:
8,844,992 →
Application:
13/891,674 →
Flexible Electrical Circuit Assembly for a Motor Vehicle
Particulate Filter Device Monitoring System for an Engine
Vehicle and a Hinge Assembly for a Storage Compartment of the Vehicle
Brake Rotor and Method of Manufacturing the Same
Speech Recognition with a Plurality of Microphones
Reducing Driver Distraction in Spoken Dialogue
Control Method for Ress Fan Operation in a Vehicle
Stochastic Pre-Ignition (Spi) Mitigation Using an Adaptive Spi Scaler
Application:
13/893,709 →
Publication:
US US20140297164A1
Engine Startup Control Systems and Methods
Discrete Mechanism for Electronic Transmission Range Selection
Multi-Speed Transmission
Method for in-Situ Forming of Low Friction Coatings on Engine Cylinder Bores
Alert Systems and Methods for a Vehicle with Improved Actuator Placement
Alert Systems and Methods for a Vehicle with Improved Actuator Installation
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Application:
13/894,302 →
Publication:
US US20130342364A1
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Application:
13/894,308 →
Publication:
US US20130342365A1
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Alert Systems and Methods for a Vehicle
Optimal Fusion Of Electric Park Brake And Hydraulic Brake Sub-System Functions To Control Vehicle Direction
Powertrain and Steering Assembly Layout
Adaptive Soot Mass Estimation in a Vehicle Exhaust After-Treatment Device
Mirror Assembly
Application:
13/895,414 →
Publication:
US US20140340757A1
Wheel Stabilization Mechanism and Method
Attachment Assembly
Detection Of Active-Material Overheat Conditions Without Temperature Sensor
Start System for a Motor Vehicle
Systems and Methods for Video Playback Control
Application:
13/896,212 →
Publication:
US US20140341545A1
Systems and Methods for Video Playback Control
Grommet Seal, Center Diversion Shaft and Methods of Making and Using the Same
Warning Device for a Motor Vehicle Having at Least One Electrically Movable Closing Element for a Vehicle Opening
Application:
13/897,751 →
Publication:
US US20130321137A1
Battery Enclosure Systems and Methods
Snap Ring
Application:
13/897,997 →
Publication:
US US20140023459A1
Protective Battery Cell Plates
Providing Customized Fuel Economy Ratings Based on Customer Drive Cycle
Application:
13/898,100 →
Publication:
US US20140343912A1
Engine Running Notice and Automatic Shut-Off
Sensorless Position Control of Active-Material Actuators
Eight Speed Automatic Transmission
Application:
13/899,100 →
Method and Device for Controlling an Electrical Actuator for a Wastegate Valve Arrangement of an Exhaust Gas Turbocharger
Gear Shifter
Method and Apparatus to Operate Internal Combustion Engine Employing an Intake Air Compressor
Fuel Cell Stack Compression System Having Integrated Vehicle Mounts
Sealing System for a Frameless Door of a Vehicle
Redundant Computing Architecture
Apparatus and Method for Measuring Temperature and Electrical Resistivity of a Movable Object
Method and Apparatus for Controlling a Multi-Mode Powertrain System
Protective Cap for a Terminal Connection of a Battery
Application:
13/900,734 →
Publication:
US US20130330583A1
Probabilistic Target Selection and Threat Assessment Method and Application to Intersection Collision Alert System
Brake Assembly
Method of Controlling a Transmission of a Vehicle
Fluid Level Detection Device with Stabilizer
State Transition Control for a Multi-Mode Hybrid Powertrain
Systems and Methods for Detecting Compressor Surge
Transmission Parking Pawl Actuation Assembly
Multi-Speed Transmission
Seven Speed Dual Clutch Transmission Having Improved Packaging
Seat Assembly
Methods and Systems for Shaping Dialog of Speech Systems
Application:
13/903,626 →
Publication:
US US20140358538A1
Adaptive Open Loop Control to Reduce Engine Induced Vibration and Noise
System and Method for Controlling a Powertrain System to Perform Exhaust Braking
Application:
13/904,177 →
Publication:
US US20140358400A1
High-Voltage Contactor Switching Systems and Methods
Methods to Improve Secure Flash Programming
Hydraulic Control System for an Automatic Transmission
Turbocharged Engine Employing Cylinder Deactivation
Application:
13/905,435 →
Publication:
US US20140352300A1
Electric Motor Assembly and Method
Automated Manual Transmission with Electric Motor-Generator
Method and System for Selectively Enabling and Disabling a Diagnostic Monitor of a Selective-Catalytic-Reduction Device
Damper Assembly with Monotube and Dynamic Compression Valve and Vehicle Having Same
Powertrain Cooling System with Cooling and Heating Modes for Heat Exchangers
Preparation of Nanostructured Thin Catalytic Layer-Based Electrode Ink
Modular Power Transfer Unit Assembly for a Vehicle
Hydraulic Control System for a Continuously Variable Transmission
Method of Identifying a Synchronous Position of a Synchronizer Actuator Fork of a Dual Clutch Transmission
Waste Heat Recovery System with Integrated Hydrocarbon Adsorber, and Method Thereof
Exhaust Gas Treatment System with Emission Control During Filter Regeneration
Application:
13/906,940 →
Publication:
US US20140352279A1
Transition from Homogeneous Charge Compression Ignition Combustion Mode to Spark Ignited Combustion
Upshift Control of a Dry Dual-Clutch Transmission
Turbocharger Assembly with Compressed Air Cooled Bearings
Piezoelectric Resonators for Reduction of Noise and Vibration in Vehicle Components
Application:
13/907,273 →
Publication:
US US20140354112A1
Systems and Methods for Initializing a Charging System
Intake Manifold Assembly
Support System for Magnetically Supporting an Object on a Support
Rapid Nearest Neighbor Searching Using Kd-Ferns
System and Method to Diagnose Fuel System Pressure Sensor
Particulate Filter Device Monitoring System for an Internal Combustion Engine
Related Assignments
(1)
Other recorded transfers of the patents in this record — the chain of ownership.