Patent Assignment
Reel/Frame 044416/0867
Release of Security Interest
Recorded: 2017-11-10
Pages: 58
Assignor
JPMORGAN CHASE BANK, N.A., AS COLLATERAL AGENT
Executed: 2017-11-06
Assignees
INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC
2701 NAVISTAR DRIVE, LISLE, ILLINOIS, 60532
INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC
2701 NAVISTAR DRIVE, LISLE, ILLINOIS, 60532
NAVISTAR, INC.
2701 NAVISTAR DRIVE, LISLE, ILLINOIS, 60532
NAVISTAR INTERNATIONAL CORPORATION
2701 NAVISTAR DRIVE, LISLE, ILLINOIS, 60532
Covered Properties
(894)
Electronic Engine Control Module Incorporating Glow Plug and Glow Plug Lamp Control
Patent:
5,241,929 →
Application:
07/932,432 →
Display of Electronic Self-Test Results Using Gauge Dial Pointers
Patent:
5,822,335 →
Application:
07/935,762 →
Priming Reservoir and Volume Compensation Device for Hydraulic Unit Injector Fuel System
Patent:
5,245,970 →
Application:
07/941,271 →
Electronic Management System for Heavy-Duty Trucks
Patent:
5,365,436 →
Application:
08/004,344 →
Vehicle Fuel Tank Mounting and Protective Cage
Patent:
5,366,246 →
Application:
08/060,457 →
Partial Combustion Catalyst of Palladium on a Zirconia Support and a Process for Using It
Patent:
5,405,260 →
Application:
08/097,957 →
Fire Truck Cooling System
Patent:
5,433,267 →
Application:
08/128,417 →
Protective Cage for Fuel Tank Installed Between Vehicle Side Members
Patent:
5,380,042 →
Application:
08/170,541 →
Catalyst Structure Employing Integral Heat Exchange
Patent:
5,512,250 →
Application:
08/205,279 →
Circuit for Automated Control of on-Board Closed Circuit Television System Having Side and Rear View Cameras
Patent:
5,530,421 →
Application:
08/233,867 →
Diesel Engine Egr System with Exhaust Gas Conditioning
Patent:
5,440,880 →
Application:
08/243,022 →
Dynamic Enhancement of Egr Flow in an Internal Combustion Engine
Patent:
5,533,487 →
Application:
08/264,657 →
Injection Control Pressure Strategy
Patent:
5,485,820 →
Application:
08/300,292 →
Continuous High Pressure Rail Deaeration System for Fuel Injection System
Patent:
5,454,359 →
Application:
08/347,627 →
A Catalyst Structure for Use in a Partia Combustion Process
Patent:
5,511,972 →
Application:
08/371,561 →
Nestable Multipiece Truck Cab Roof Fairing Assembly
Patent:
5,603,549 →
Application:
08/420,920 →
Programming Response of Electronically-Controlled Gauges
Patent:
6,112,138 →
Application:
08/421,016 →
Support Structure for a Catalyst
Patent:
6,116,014 →
Application:
08/462,639 →
Fuel Tank Mounting Cage
Patent:
5,673,940 →
Application:
08/551,207 →
Cast Oil Pan for Internal Combustion Engine
Patent:
5,601,060 →
Application:
08/622,078 →
Method and Apparatus for Setting Foundry Core Assemblies
Patent:
5,855,468 →
Application:
08/656,400 →
Daytime Running Lights
Patent:
5,780,974 →
Application:
08/694,006 →
Self-Aligning Flexible Gear Support for Auxiliary Gear Box
Patent:
5,794,476 →
Application:
08/735,480 →
Universal Attachment Extension Tube with Rotational Locking Device
Patent:
5,713,318 →
Application:
08/740,582 →
Driver Contolled Air System Moisture Removal and Pre-Trip Inspection System
Patent:
5,936,154 →
Application:
08/920,153 →
Durable Open, and Accessible Recreational Vehicle Subfloor Construction
Patent:
5,921,615 →
Application:
08/921,097 →
Electro-Hydraulic Clutch Actuation System for Manual Transmission
Patent:
5,928,106 →
Application:
08/951,992 →
Electronic Engine Control for Regulating Engine Coolant Temperature at Cold Ambient Air Temperatures by Control of Engine Idle Speed
Patent:
6,067,959 →
Application:
08/962,587 →
Integral Tube/Nut Stopper for Engine Fuel Line Tube
Patent:
6,098,668 →
Application:
09/003,418 →
Polyurethane/Polyurea Elastomer Coated Steel Battery Box for Hybrid Electric Vehicle Applications
Patent:
6,189,635 →
Application:
09/041,362 →
Parking Brake Lock-in Key Switch System for Vehicle Air Brake System
Patent:
6,007,159 →
Application:
09/063,146 →
Electronic Engine - Air Compressor System
Patent:
5,997,259 →
Application:
09/071,129 →
Durable Doors for a Recreational Vehicle
Patent:
6,079,766 →
Application:
09/073,669 →
Integration of an Engine Lubrication System with an Engine Fuel System
Patent:
6,167,978 →
Application:
09/109,456 →
Altitude Compensating Wastegate Control System for a Turbocharger
Patent:
6,178,748 →
Application:
09/122,021 →
Commanded,Rail-Pressure-Based, Variable Injector Boost Current Duration
Patent:
5,924,407 →
Application:
09/124,279 →
Circuit for Interfacing Vehicle Drivetrain, Service Brake, and Power Take-Off with Engine Control
Patent:
6,045,485 →
Application:
09/124,598 →
Method of Installing an Oil Pan Heater on an Oil Pan Mounted on an Engine Block
Patent:
6,052,896 →
Application:
09/134,876 →
Hydraulically-Assisted Engine Valve Actuator
Patent:
6,044,815 →
Application:
09/152,497 →
Brake Activated Torque Disable in Hybrid Electric Vehicles
Patent:
6,186,253 →
Application:
09/159,324 →
Coolant Filter with Coolant Additive Sensor
Patent:
6,098,575 →
Application:
09/164,610 →
Integrated Active Seat Suspension and Seat Lockup Device
Patent:
6,120,082 →
Application:
09/264,788 →
Controlled Two-Speed Axle Shifting with Automatic Transmission
Patent:
6,237,712 →
Application:
09/280,310 →
Mounting Bracket for Automatic Transmission Shift Control
Patent:
6,282,975 →
Application:
09/304,759 →
Dual Draw and Return Fuel Manifold with Integral Mounting Bracket for a Vehicle
Patent:
6,213,243 →
Application:
09/316,872 →
Driver Controlled Air System Moisture Removal and Pre-Trip Inspection System
Patent:
6,272,904 →
Application:
09/320,391 →
Toroidal Exhaust Vibration Absorber
Patent:
6,412,586 →
Application:
09/321,476 →
Engine Control System Linked to Vehicles Controls
Patent:
6,248,041 →
Application:
09/352,423 →
Remote Interface Modules with Programmable Functions
Patent:
6,272,402 →
Application:
09/354,452 →
Method for Matching the Spool Valve Lands in a Fuel Injector
Patent:
6,174,219 →
Application:
09/360,878 →
Mobile Multiplexed Slow Scan Video System
Patent:
6,480,224 →
Application:
09/384,673 →
Hydraulic System with a Combination Filter Screen and Gasket
Patent:
6,098,597 →
Application:
09/391,172 →
Clip-On Deflector for a Fuel Injector
Patent:
6,189,511 →
Application:
09/392,373 →
Engine with a Direct Passage from the Oil Reservoir to the Oil Pump
Patent:
6,257,193 →
Application:
09/397,170 →
Parking Brake Lock-in Key Switch System for Vehicle Air Brake System
Patent:
6,234,586 →
Application:
09/400,989 →
Self-Leveling Suspension System
Patent:
6,378,878 →
Application:
09/406,324 →
Vehicle Anti-Lock Brake Systems Assembly Verification System
Patent:
6,188,948 →
Application:
09/410,847 →
Bumper Integrated School Bus Safety Arm
Patent:
6,213,526 →
Application:
09/430,584 →
Land Vehicle Communications System and Process for Providing Information and Coordinating Vehicle Activities
Patent:
6,356,822 →
Application:
09/434,671 →
Transfer Case Engagement and Disengagement System
Patent:
6,297,566 →
Application:
09/441,486 →
Dual Function Lamp Socket
Patent:
6,135,780 →
Application:
09/443,261 →
Configuration Programming of Input/Output Connections for Network Modules in a Multiplexed Vehicle Communication System
Patent:
6,263,269 →
Application:
09/447,132 →
Method of Installing an Oil Pan Heater on an Oil Pan Mounted on an Engine Block
Patent:
6,378,167 →
Application:
09/457,633 →
Hydraulically-assisted engine valve actuator
Patent:
6,338,320 →
Application:
09/457,908 →
Method & apparatus for conditioning deployment of air bags on vehicle load
Patent:
6,327,528 →
Application:
09/502,936 →
Electronic engine control for regulating engine coolant temperature at cold ambient air temperatures by control of engine idle speed
Patent:
6,247,446 →
Application:
09/510,772 →
Hydraulically-assisted engine valve actuator
Patent:
6,263,842 →
Application:
09/517,144 →
Telemetry System and Method for Emi Susceptibility Testing of Motor Vehicles
Patent:
6,426,813 →
Application:
09/518,857 →
Right hand drive steering system and conversion method from left hand drive vehicle
Patent:
6,276,476 →
Application:
09/529,044 →
Backshell with forced electrical connector orientation
Patent:
6,364,693 →
Application:
09/542,195 →
Integrated Front lower shock mount, axle spacer and caster wedge
Patent:
6,352,245 →
Application:
09/552,192 →
Fuel injector with actuation pressure delay device
Patent:
6,286,483 →
Application:
09/553,002 →
Articulating air spring suspension for tandem axle
Patent:
6,276,710 →
Application:
09/553,003 →
School bus door operator
Patent:
6,264,267 →
Application:
09/562,896 →
Integrated active seat suspension and seat lockup device
Patent:
6,193,297 →
Application:
09/566,865 →
Double-Acting Two-Stage Hydraulic Control Device
Patent:
6,474,304 →
Application:
09/570,896 →
Compressible Fluid Suspension System
Patent:
6,416,044 →
Application:
09/571,961 →
Vehicle frame siderails with standardized positioning of attachment support holes
Patent:
6,398,261 →
Application:
09/579,907 →
Symmetrical dash reinforcement
Patent:
6,260,914 →
Application:
09/580,190 →
Diesel engine speed control to prevent under-run
Patent:
6,223,720 →
Application:
09/586,280 →
Component Mount for a Vehicle Frame
Patent:
6,408,974 →
Application:
09/591,824 →
Driver Control Module
Patent:
6,591,927 →
Application:
09/603,291 →
Headlight Anti-Glare System
Patent:
6,515,425 →
Application:
09/604,991 →
Casting Method and Apparatus
Patent:
6,644,381 →
Application:
09/608,176 →
Wireless Interface Adaptor for Remote Diagnosis and Programming of Vehicle Control Systems
Patent:
6,430,485 →
Application:
09/611,039 →
Vehicle ventilation system
Patent:
6,361,428 →
Application:
09/611,041 →
Front Air Spring Suspension with Anti-Dive and Anti-Roll Properties
Patent:
6,394,474 →
Application:
09/612,346 →
Anti-lock brake sensor bracket
Patent:
6,286,638 →
Application:
09/619,854 →
Iron Alloy Casting Method and Apparatus
Patent:
6,463,991 →
Application:
09/626,515 →
Programmable Matrix Controller for Correlating Electric Devices in a Motor Vehicle with Switches of a Switch Module
Patent:
6,724,102 →
Application:
09/626,757 →
Method and apparatus for wheel condition and load position sensing
Patent:
6,313,742 →
Application:
09/634,166 →
Blasting Apparatus with a Dual Structure Deflector
Patent:
6,431,965 →
Application:
09/639,477 →
Diesel engine load governing using engine speed setpoint
Patent:
6,425,370 →
Application:
09/639,604 →
Quick connect fluid coupling for an air cleaner
Patent:
6,383,243 →
Application:
09/651,681 →
Air Cleaner Inlet Device
Patent:
6,395,048 →
Application:
09/651,683 →
Actuating fluid delivery system for a fuel injector
Patent:
6,374,805 →
Application:
09/653,051 →
Method and Apparatus for Pre-Pilot Fuel Injection in Diesel Internal Combustion Engines
Patent:
6,378,487 →
Application:
09/653,469 →
Air Cleaner with Self-Mounted Inlet Shroud Seal
Patent:
6,425,930 →
Application:
09/653,594 →
Programmable Vehicle Stopping System and Process for Route Learning
Patent:
6,396,395 →
Application:
09/659,808 →
Device and method to hold sound insulation in vehicle hood
Patent:
6,378,640 →
Application:
09/675,613 →
Mixed Oxide Solid Solutions
Patent:
6,521,566 →
Application:
09/680,547 →
Combustion Gasket Having Dual Material Structures
Patent:
6,460,512 →
Application:
09/690,557 →
Actuating fluid delivery system for a fuel injector
Patent:
6,374,806 →
Application:
09/694,174 →
Engine Torque Control Strategy
Patent:
6,398,692 →
Application:
09/697,785 →
Wheel Mounted Power Generator and Wheel Condition Sensing Apparatus
Patent:
6,742,386 →
Application:
09/702,151 →
Remote Keyless Entry System for Motor Vehicles
Patent:
6,522,029 →
Application:
09/702,152 →
Low Load Floor Motor Vehicle
Patent:
6,702,057 →
Application:
09/710,720 →
Mirror Head Assembly
Closed Loop Diesel Engine Egr Control Including Event Monitoring
Core Assembly Method for Cylinder Head Castings
Electrical Connection Module
Hydraulic Fuel System
Control of a Variable Geometry Turbocharger by Sensing Exhaust Pressure
Front Module Housing
Intake Manifold Module
Rocker Carrier
Balancer Shaft
Rocker Arm Assembly
Vehicle Battery Condition Monitoring System
Patent:
6,417,668 →
Application:
09/774,412 →
Variable Nozzle Turbine Control Strategy
Consistent Application Programming Interface for Communicating with Disparate Vehicle Network Classes
Dual Draw and Return Fuel Manifold with Integral Mounting Bracket for a Vehicle
Intelligent Vehicle Air Conditioning Control System
Method of Monitoring Engine Lubricant Condition
Vehicle Accessory-Mounting Assembly
Bearing Retention System
Cold Start Pulse Width Compensation
Injector Hold Down Clamp
Patent:
6,431,152 →
Application:
09/823,691 →
Oil Activated Fuel Injector Control Valve
System Moisture Absorber
Patent:
6,430,921 →
Application:
09/834,081 →
Vehicle Body Suspension System
Retractable Seat Valve and Method for Selective Gas Flow Control in a Combustion Chamber
Cartridge Thermostat System
Patent:
6,450,410 →
Application:
09/851,044 →
T - Style Radiator - Charge Air Cooler Packaging for a Mobile Vehicle
L-Bracket Modular Front Engine Mounting
Control Valve Body for an Oil Activated Fuel Injector
Gear Shifter to Transmission Interface and Control Sub-System
Control Strategy for Turbocharged Engine Having Variable Valve Actuation Apparatus
Patent:
6,434,938 →
Application:
09/906,487 →
Piston Pin Bushing Cooler
Engine Torque Calculation
Automated Vehicle Inspection System
Apparatus for Enabling Truck Power Take Off Functionality During Auto Neutral
Cooling Module Mounting System and Assembly Process
Patent:
6,648,089 →
Application:
09/923,561 →
Piston Having Combustion Chamber Defined in the Crown
Patent:
6,513,476 →
Application:
09/933,407 →
Controller Area Network Diagnostic Instrument
System and Method for Vehicle Engine Cranking
Storable Bed Assembly
Method and Apparatus for Wheel Condition and Load Position Sensing
Vehicle Lamp Inspection System
Vehicle Park Brake Actuator System
Land Vehicle Communications System and Process for Providing Information and Coordinating Vehicle Activities
Land Vehicle Communications System and Process for Providing Information and Coordinating Vehicle Activities
Land Vehicle Communications System and Process for Providing Information and Coordinating Vehicle Activities
Fuel Injector with Controlled High Pressure Fuel Passage
System and Method for Predicting Quantity of Injected Fuel and Adaptation to Engine Control System
Valve Actuation Linkage Mechanism
Configurable Interrupter for Circuit Overcurrent Conditions
Method for Manufacture of Gray Cast Iron for Crankcases and Cylinder Heads
System and Method for Calibrating Fuel Injectors in an Engine Control System That Calculates Injection Duration by Mathematical Formula
Catalyst Placement in Combustion Cylinder for Reduction of Nox and Particulate Soot
Poppet Valve Actuator
Assembly Verification Method and Inspection System
Combustion Chamber
Governor Plate Apparatus
Park Position Locking System for Automatic Transmission Shifter
Diagnostic Tool for Electric-Operated Fuel Injectors and Their Drivers
Fuel Injector with Dual Control Valve
Electrical Load Management in Conjunction with Idle Shutdown
Lift Axle Control
Hood Latch and Vehicle Mounting
Vehicle Heating and Air Conditioning Modules
Method and System for Controlling a Drivetrain Retarder
Method and Apparatus to Provide Engine Compression Braking
Method and Apparatus for Flexibly Regulating Internal Combustion Engine Valve Flow
Mirror Head Assembly
Dual Control Valve
Control Strategy for Improving Cold Cranking, Starting, and Warm-Up of an Engine Having a Variable Valve Actuation Mechanism
Pressure Control Valve with Flow Recovery
Vehicle Cab Suspension System
Cartridge Thermostat System
Actuating Fluid Control System
Vandal-Lock/Starter-Interlock
Vehicle Sleeper Compartment Bunk Bed Ladder
Patent:
6,578,905 →
Application:
10/141,467 →
Corrosion Resistant Cast-in Insert Exciter Ring
Patent:
6,568,512 →
Application:
10/146,777 →
Control Strategy for Regenerating a Particulate Filter in an Exhaust System of an Engine Having a Variable Valve Actuation Mechanism
Unit Trigger Actuator
Acoustic Wave Attenuator for a Rail
Pressure Wave Attenuator for a Rail
Hood Locating Isolator
Wheel Hub Magnetic Filter for Lubricating Fluids
Method of Monitoring Engine Lubricant Condition
Iron Alloy Casting Method and Apparatus
Wire Guide
Patent:
6,590,162 →
Application:
10/195,451 →
Control Strategy for Regenerating a Nox Adsorber Catalyst in an Exhaust System of an Engine Having a Variable Valve Actuation Mechanism
Air Assisted Vehicle Clutch Linkage
Core Element Fastening and Assembly Method
High Retention Force Anti-Lock Brake Sensor Clip
System and Method for Balancing Fuel Levels in Multiple Fuel Tank Vehicles
Tractor Trailer Gap Treatment
Control Strategies for a Variable Displacement Oil Pump
Forced Regeneration of a Diesel Particulate Filter
Control Strategy Using Variable Valve Actuation to Reduce Particulate Emission and Improve Driveability During Transient Operation of a Turbocharged Diesel Engine
Patent:
6,658,845 →
Application:
10/223,853 →
Control Strategy for Counteracting Incipient Turbocharger Surging Using a Variable Valve Actuation Mechanism for Through-Cylinder Bleed
Patent:
6,647,723 →
Application:
10/224,132 →
Solenoid End Cap Assembly with Flat Surface
Vehicle Entrance-Door Safety-System
Enhanced Needle Motion Controller
Park-Brake Monitoring-System for a Vehicle
Water Pump and Impeller Therefor
Combustion Chamber
Coupling
Patent:
6,637,781 →
Application:
10/265,799 →
Multiple Tank Circulating Fuel System
Damper Assembly with Reinforcing Plate
Park-Brake Monitoring-System for a Vehicle
Fuel Injection Timing Compensation Based on Engine Load
Intercooler Bypass
Divided Exhaust Manifold System and Method
Truck Cab Suspension System
Vehicle Suspension System
Vehicle Accessory Power Arrangement
Fluid Inlet Grille with Aerodynamic Grille Bars
Trailing Arm Suspension System
Patent:
7,178,817 →
Application:
10/286,075 →
Coupling Device Assembly
Retainer Clip
Method of Estimating Engine Lubricant Condition
Method and Apparatus for Delivering Fuel to an Engine
Engine Endless Drive Belt Tensioner and Tensioner Position Indicator
Seal for Use with a Movable Rod
Fluid Center
System and Methods for Improved Emission Control of Internal Combustion Engines
Engine Speed-Based Modification of Exhaust Gas Recirculation During Fueling Transients
Patent:
6,698,409 →
Application:
10/314,671 →
Ceramic Fiber Core for Casting
Cab Body Mounting Having a Load Sharing Feature for Limiting Shearing Stress in a Fastener of the Mounting
Patent:
6,692,052 →
Application:
10/322,009 →
Post- Retard Fuel Limiting Strategy for an Engine
Injection Control Pressure Strategy During Activation of an Engine Retarder
Patent:
6,681,740 →
Application:
10/338,427 →
Piston Formed by Powder Metallurgical Methods
Automated Vehicle Inspection System
Vehicle Intercom System
Vehicle Sleeper Compartment Bunk Bed Ladder
Obstruction of Flow to Improve Flow Mix
Vehicle Accessory-Mounting Assembly
Fuel Injection Device Having Independently Controlled Fuel Compression and Fuel Injection Processes
Engine Exhaust System Pneumatic Pump
Fuel Injector Retainer Assembly
Fuel Injector Clamp with Retaining Sleeve
Fuel Injector Clamp with Retaining Ring
Patent:
6,745,752 →
Application:
10/369,399 →
Seal Having Gaps
Method for Updating an Electronic Service Tool
Torque-Based Low Idle Governor
Patent:
6,654,678 →
Application:
10/385,046 →
Three-Reentrancy Combustion Chamber
System and Method for Vehicle Axle Load Measurement with Hysteresis Compensation and Acceleration Filter
Method and Apparatus for Determining a Valve Operator Position
Method and Apparatus for Inserting an Adaptor in a Housing
Hydraulic Actuator Cartridge for a Valve
Vehicle with Engine Idle-Management System
Compressed Air Actuated Clutch Interlock for Clutched Power Take Off Unit
Installation Tool
Vehicle Energy Management System
System and Methods for Improved Emission Control of Internal Combustion Engines Using Pulsed Fuel Flow
Fuel-Level-Detection System, Calibration Method, and Calibration System
Pto-Logic Configuration System
Apparatus and Method for Verifying the Beam Axis of Front-Looking Land Vehicle Transceiver Antenna
Patent:
6,809,806 →
Application:
10/445,679 →
Wire Guide
Engine- and Vehicle- Speed-Based Engine Cooling Fan Control
Patent:
6,745,727 →
Application:
10/463,157 →
Acoustic Wave Attenuator for a Rail
Stepwell Cover Apparatus
Patent:
6,848,735 →
Application:
10/465,042 →
Motor Vehicle Battery Disconnect Switch Circuits
Method of and Apparatus for Forming a Refractory Lining in a Coreless Furnace
Driver/Entry Ventilation System for a Bus
Configurable Switch Array
Direct Current Motor Condition Monitoring and Exercising System
Apparatus and Method for Evaluating Fuel Injectors
Circuit for Adapting a Receptacle Socket in a Towing Vehicle for Diverse Trailer Circuits
Clean, Low-Pressure Egr in a Turbocharged Engine by Back-Pressure Control
Casting Method and Apparatus
Casting Sand Cores and Expansion Control Methods Therefor
Modularized Power Take-Off Systems for Vehicles
Engine Brake Control Pressure Strategy
Patent:
6,779,506 →
Application:
10/668,854 →
Vertically Oriented Dual Circuit Pilot Master Cylinder
Reducing Pre-Cycle Warm-Up for Electronic Components
Apparatus for Aligning Push Rods
Engine Transient Detection and Control Strategy
Piston Cooling System for an Internal Combustion Engine
Internal Combustion Engine with Pressure Boosted Exhaust Gas Recirculation
Remote Engine Stop/Start System with Backup Motor Control
Patent:
6,789,519 →
Application:
10/690,752 →
Sub-Assembly Mounting System
Core Assembly Apparatus and Process for Assembly of in-Line Six Cylinder Core Packages
Map-Scheduled Gains for Closed-Loop Control of Fuel Injection Pressure
Patent:
6,850,832 →
Application:
10/692,866 →
Sliding Chassis Skirt
Exhaust Gas Control in an Engine Having a Two-Stage Turbocharger
Patent:
6,801,846 →
Application:
10/692,948 →
Method and Apparatus for Indicating a Potential Fluid Filter Problem
Cold Start Compensation for P-I-D Engine Governor
Patent:
6,786,198 →
Application:
10/697,435 →
Steering Wheel Mounted Warning/Cross-Over Lights Switches
Attenuation of Engine Harshness During Lean-to Rich Transitions
Control Strategy for Lean-to-Rich Transitions in an Internal Combustion Engine
Soot Burn-Off Control Strategy for a Catalyzed Diesel Particulate Filter
Devices and Methods for Reduction of Nox Emissions from Lean Burn Engines
Torque Speed Control Authority for an Engine Having an All-Speed Governor
One Piece a-Pillar Air Deflector and Windshield Molding
Patent:
6,899,376 →
Application:
10/755,634 →
Distance Tolerant Leadless Current Sensor
Vehicle Sleeper Panel Design
Engine Based Kinetic Energy Recovery System for Vehicles
Engine Speed Stabilization Using Fuel Rate Control
Runnerless Engine Intake Manifold Having Integral Fuel Delivery Groove or Bore
Patent:
6,840,221 →
Application:
10/775,784 →
Gasket
School Bus Passenger Seat with Integrated Restraints
Method and Apparatus for Adjusting Fuel Injection Timing
Vehicle Heating and Air Conditioning Modules
Increasing the Duration of Peak Combustion Pressure in Cylinders of a Diesel Engine Using Fuel Injection Control Strategies
Flow Deflector for a Pipe
Integrated Hydraulic System for Motor Vehicles
Controlling an Engine Operating Parameter During Transients in a Control Data Input by Selection of the Time Interval for Calculating the Derivative of the Control Data Input
Control Strategy for Hcci-Cd Combustion in a Diesel Engine Using Two Fuel Injection Phases
Fuel Injector Testing System
Air Brake System Characterization by Self- Learning Algorithm
High Volume Actuating Fluid Rail
Camshaft Position Sensor Testing System
Retainer for Connector
Fuel System
Connection System for Exhaust Gas Recirculation (Egr)
Apparatus for Fastening Sand Core Elements
Turbocharger Mounting System
Non-Homogeneous Engine Component Formed by Powder Metallurgy
Non-Homogeneous Engine Component Formed by Powder Metallurgy
Air Brake System Monitoring for Pre-Trip Inspection
Drive Chain Assembly Restraint
Strategy for Fueling a Diesel Engine by Selective Use of Fueling Maps to Provide Hcci+Rvt, Hcci+Vvt, and Cd+Rvt Combustion Modes
Patent:
6,957,640 →
Application:
10/874,668 →
Unit Trigger Actuator
Sealing System for Multiple Fluids
De-Sulfurization of a Nox Adsorber Catalyst in a Diesel Engine Exhaust System
Torque Control Strategy for a Diesel Engine During Lean-Rich Modulation Using Independent Fuel Injection Maps
Cooling System for an Internal Combustion Engine with Exhaust Gas Recirculation (Egr)
Hybrid Catalyst System for Exhaust Emissions Reduction
Common Control Interface for Diverse Automated Manual Transmissions
Dynamic Fuel Injection Control Pressure Set-Point Limits
Patent:
6,973,923 →
Application:
10/894,981 →
Engine Block Casting and Method of Manufacture
Method and Apparatus for Determining Turbocharger Boost
Pre-Combustors for Internal Combustion Engines and Systems and Methods Therefor
Vehicle Intercool System
Manually Controlled Replacement Solenoid for Hydraulic Valves
Post-Retard Fuel Limiting Strategy for an Engine
Method for Fault Analysis Using Simulation
System and Method of Fuel Map Selection
Patent:
6,950,740 →
Application:
10/924,518 →
Engine Cooling Fan Shroud
Transient Compensation of Egr and Boost in an Engine Using Accelerator Pedal Rate Data
Patent:
6,985,808 →
Application:
10/939,741 →
Fuel Pump Drive System in an Internal Combustion Engine
Patent:
6,976,476 →
Application:
10/945,582 →
Two Stage Mixing System for Exhaust Gas Recirculation (Egr)
Venturi Mixing System for Exhaust Gas Recirculation (Egr)
Vortex Mixing System for Exhaust Gas Recirculation (Egr)
Detecting Leakage of Engine Exhaust Gas Using Exhaust Mass Flow Measurement
Patent:
6,993,428 →
Application:
10/946,750 →
Transient speed- and transient load-based compensation of fuel injection control pressure
Patent:
6,988,029 →
Application:
10/947,917 →
Lift Gate Power Control System
User Adaptive Automated Pre-Trip Inspection System
Jacket and Slab Core Fastening Apparatus
Method and Apparatus for Evaluating the Flowability of Core Forming Materials
Diesel Combustion Chamber
Patent:
6,997,158 →
Application:
10/960,662 →
Emission Reduction in a Diesel Engine Using an Alternative Combustion Process and a Low-Pressure Egr Loop
Steering Wheel Mounting for Transmission Shift Controls
Emission Reduction in a Diesel Engine by Selective Use of High-and Low-Pressure Egr Loops
Patent:
6,973,786 →
Application:
10/963,076 →
Thin Film Sensor for Brake Lining Pad Wear and Brake Temperature Sensing
Combined Filter and Fill Tube
System and Method to Control Spool Stroke Motion
Wheel Splash and Spray Suppressor
Valve Having Axial and Radial Passages
Internal Combustion Engine with at Least Two Cylinder Banks
Electronically Controlled Selective Valve System for Fuel Level Balancing and Isolation of Dual Tank Systems for Motor Vehicles
Solenoid Actuated Control for Fuel Distribution in a Dual Fuel Tank Vehicle
Air Management Strategy for Auto-Ignition in a Compression Ignition Engine
Patent:
7,013,212 →
Application:
10/974,639 →
Core Element Fastening and Assembly Method
Clutch Linkage with Vibration Isolation and Damping
Automatic Braking-Enhanced Steering System
Robust Egr Control for Counteracting Exhaust Back-Pressure Fluctuation Attributable to Soot Accumulation in a Diesel Particulate Filter
Vehicle Integrated Radio Remote Control
Vehicle Onboard Brake Pad/Lining Wear Estimators with Temperature Estimations
Automated Control System for a Vehicle Lift Axle
Valve Lifter Guide
Exterior Lamp Check for Motor Vehicles
Motion Controlling Plate for Seat and Seat System for a Mobile Vehicle
Towed Vehicle Lighting Module
Tubular Hinge Bar
System and Method for Diesel Particulate Trap Regeneration in a Motor Vehicle with an Auxiliary Power Unit
Mechanism and Method of Combined Fuel Reformer and Dosing System for Exhaust Aftertreatment and Anti-Idle Sofc Apu
Energy Absorbing Seat and Seat System for a Mobile Vehicle
Systems and Methods for Reducing Emissions of Internal Combustion Engines Using a Fuel Processor Bypass
Integrated Nox and Pm Reduction Devices for the Treatment of Emissions from Internal Combustion Engines
Patent:
7,062,904 →
Application:
11/059,238 →
School Bus Passenger Seat with Integrated Restraints
School Bus Passenger Seat with Energy Absorbing Occupant Restraint
Strategy for Selectively Bypassing a Dpf in a Hybrid Hcci Combustion Engine
Multi-Piece Roof with Reinforcement
Control Strategy for Expanding Diesel Hcci Combustion Range by Lowering Intake Manifold Temperature
Patent:
7,017,561 →
Application:
11/072,549 →
Hydraulic Hybrid Four Wheel Drive
Control Strategy for Reducing Fuel Consumption Penality Due to Nox Adsorber Regeneration
Post-Trip Bus Inspection Alert System
Automated Sequencing of Operations in a Motor Vehicle Upon Stopping at a Railroad Crossing
Dynamic Vehicle Electrical System Test
Method for Straightening an Eccentric Shaft
System and Method for Relieving Engine Back-Pressure by Selectively Bypassing a Stage of a Two-Stage Turbocharger During Non-Use of Egr
Patent:
7,000,393 →
Application:
11/106,994 →
Parking Brake Lock-in Key Switch System with Automatic Application for a Vehicle with an Air Brake System
Engine Valve System and Method
Automated Vehicle Battery Protection with Programmable Load Shedding and Engine Speed Control
Modular Bus Body Assembly
Hydraulic Valve Actuation System with Valve Lash Adjustment
Vehicle Passenger Seat with Tear-Away Upholstery Cover
Strategy for Fueling a Diesel Engine by Selective Use of Fueling Maps to Provide Hcci+Rvt, Hcci+Ivc, Hcci+Ivc+Evc, and Cd+Rvt Combustion Modes
Engine Cold Start Aid Malfunction Alert
Lnt Regeneration Strategy Over Normal Truck Driving Cycle
Thermal Management of Hybrid Lnt/Scr Aftertreatment During Desulfation
Bracket for Retaining Wires
Mirror Mounting with Integral Rain Gutter
Vehicle Control Network Integrated Theft Deterrent System
Tangential Mixer and Method
Prognostic and Diagnostic System for Air Brakes
No-Idle Heating of a Motor Vehicle Interior and Engine Pre-Heat Using Engine Coolant
Dpf Regeneration Monitoring Method
Acute Angle Pressure Sensor Probe and Method
Snap in Abs Exciter Ring
Strategy for Engine Fueling During Return to Positive Power Flow After Engine Brake De-Activation
Patent:
7,055,496 →
Application:
11/220,464 →
Valveless Dual Leg Exhaust Aftertreatment System
Diesel Engine Charge Air Cooler Bypass Passage and Method
Variable Compression Ratio Strategy for Improving Combustion Processes in Alternative Combustion Compression Ignition Engines
Patent:
7,168,396 →
Application:
11/227,010 →
Tire Pressure Monitoring System with Permanent Tire Identification
Model-Based Controller for Auto-Ignition Optimization in a Diesel Engine
Patent:
7,184,877 →
Application:
11/238,379 →
Exhaust Aftertreatment System with Transmission Control
Diesel Vehicle Exhaust Aftertreatment Apparatus and Method
Narrow Speed Range Diesel-Powered Engine System W/ Aftertreatment Devices
Patent:
7,063,642 →
Application:
11/246,974 →
Vented Turbocharger Center Housing and Method
Tractor-Trailer Having Self-Contained Apparatus on-Board Tractor for Estimating Trailer Weight
Thermosyphon Heat Reduction System for a Motor Vehicle Engine Compartment
Egr Cooler Purging Apparatus and Method
Strategy for Detecting Use of a Block Heater and for Modifying Temperature-Dependent Variables to Account for Its Use
Transient Speed-and Transient Load-Based Compensation of Fuel Injection Pressure
Heat Exchanger Method and Apparatus
Connector Clip and Method
Patent:
7,118,403 →
Application:
11/263,661 →
Three Sensor Comparison Rationality Test
System for Automatic Activation and Cancellation of Hazard Lights on a Vehicle
Lnt Desulfation Strategy with Reformer Temperature Management
Oxidation Catalyst Coating in a Heat Exchanger
System for Integrating Body Equipment with a Vehicle Hybrid Powertrain
Apparatus and Method for Pre-Cycle Warm-Up via Wireless Communication
Diesel Particulate Filter Cleaning Device and Method
Pneumatic Vehicle Stabilization System
Coolant Valve System for Internal Combustion Engine and Method
Jacknife Bed and Couch for Mobile Vehicle
Control Strategy for Expanding Diesel Hcci Combustion Range by Lowering Intake Manifold Temperature
Engine Exhaust Gas Passage Flow Orifice and Method
Constant Egr Rate Engine and Method
Vehicle Energy Management System
Engine Bleed Air Passage and Method
Method and System for Calculating Brake Torque Produced by a Turbocharged Engine
Engine Compartment Temperature Sensitive Louvers
Method and Device for a Proactive Cooling System for a Motor Vehicle
Model Based Diagnostics of an Aftertreatment Fuel Dosing System
Patent:
7,257,941 →
Application:
11/374,699 →
Remote Control of Engine Operation in a Motor Vehicle
Hybrid Combustion in a Diesel Engine
Endplay Measurement Tool and Method
Diesel Particulate Filter Service Method
Glare Reducing Enhancements for Vehicle Exterior Lighting Systems
Leaf Spring Truck Cab Suspension
Patent:
7,237,830 →
Application:
11/384,081 →
Escutcheon for Making a Steering Wheel Spoke Appear Symmetic About a Vertical Plane Through the Steering Wheel Axis When a Vehicle Is Being Steered in a Straight Line
Integrated Kitchen Unit for a Mobile Vehicle
Method and System of Modeling Energy Flow for Vehicle Battery Diagnostic Monitoring
Hydraulic Fitting
Heating System for a Vehicle Having an Exhaust System
Valve Lifter Guide
System and Method for Achieving Engine Back-Pressure Set-Point by Selectively Bypassing a Stage of a Two-Stage Turbocharger
Self-Centering Clamp Block
Occupant Restraint Passenger Seat Assembly with Load-Sensing Energy Absorption Feature
Turbocharger Performance Qualification Method and Apparatus
Armor Assembly for a Truck
Intake Heater for Hvac Fresh Air Intake
Engine Heater and Method
Engine Intake Air Compressor and Method
Engine Intake Air Compressor Having Multiple Inlets and Method
Enhanced Hybrid De-Nox System
Variable Geometry Turbocharger Control Method and Apparatus
Dampening Stop Pin
Lnt Desulfation Strategy
Vehicle Floor Covering System
Integrated Charge Air Cooler and Exhaust Gas Recirculation Mixer
System and Method for Heat Removal from Confined Spaces in a Motor Vehicle Using Natural Aspiration and Curie Temperature
Engine Fluid Passage Intersection and Method
Engine Cast Component Having Witness Marks and Method of Machining Same
Patent:
7,237,525 →
Application:
11/463,208 →
Crankcase for an Internal Combustion Engine
Patent:
7,258,097 →
Application:
11/463,212 →
Automated Synchronized Service Intervals for Vehicles
Tailgate with Integrated and Extensible Steps for a Vehicle Having a Cargo Bed
Patent:
7,234,750 →
Application:
11/464,957 →
Reformer and Reforming Process for Production of Hydrogen from Hydrocarbon Fuel
Fuel Injection Before Turbocharger
Integrated Dpf-Reformer
Gasification of Soot Trapped in a Particulate Filter Under Reducing Conditions
Methods and Systems for Controlling Internal Combustion Engines
Optimal Fuel Profiles
Hybrid Catalyst System for Exhaust Emissions Reduction
Motor Vehicle Battery Disconnect Circuit Having Electronic Disconnects
Finite State Machine Vehicle Headlight Controller
Module-Locating Fastener and Method of Mounting on a Vehicle Chassis
Engine and Method for Counteracting Face Plugging of a Diesel Oxidation Catalyst
Patent:
7,308,788 →
Application:
11/537,225 →
Self-Aligning Fixed Grille
Auxiliary Lighting System for Vehicles
System for Pre-Indication of Motor Vehicle Hid Lamp Feature
System and Method for Driver-Initiated Regeneration of a Diesel Particulate Filter While a Motor Vehicle Is Parked
Diesel Particulate Filter (Dpf) in-Chassis Cleaning Method
Exhaust Gas Throttle for Divided Turbine Housing Turbocharger
Engine Cover and Method
Reducing Hc Collection in a Diesel Particulate Filter During Failure in an Engine Cold Start Aid
Patent:
7,258,112 →
Application:
11/555,270 →
Gasket with Leak Conduit
Patent:
7,347,176 →
Application:
11/557,542 →
Engine Cooling Fan Shroud
Vehicle Electrification Using a Clutched Vibration Damper
Routing Clip Elements with a Living Hinge and Interlocking Closure
Post-Trip Bus Inspection Alert System
Installing Vehicle Wiring Harness
Integrated Hydraulic System for Motor Vehicles
Strategy for Fueling a Diesel Engine by Selective Use of Fueling Maps to Provide Hcci, Hcci+Cd, and Cd Combustion Modes
Low-Restriction Turbine Outlet Housing
Micro-Venturi Exhaust Cooling Device
System for Signaling Potential Unintended Application of Park Air Brake in a Vehicle Having a Lift Platform
Thermal management of hybrid LNT/SCR aftertreatment during desulfation
Application:
11/634,794 →
Publication:
US 2007/0079602
Optimized Rhodium Usage in Lnt Scr System
Closed Loop Control of Exhaust System Fluid Dosing
System and Method for Calculating Loading of a Diesel Particulate Filter by Windowing Inputs
Hold Down Plate for Securing a Component
Patent:
7,353,793 →
Application:
11/671,839 →
Egr Metallic High Load Diesel Oxidation Catalyst
Patent:
7,299,793 →
Application:
11/671,840 →
Attenuation of Engine Harshness During Lean-to-Rich Transitions
Adjustable Cab Extender
Patent:
7,374,229 →
Application:
11/673,155 →
Diesel Engine Exhaust After-Treatment Operator Interface Algorithm
Air Valve and Method of Use
Compound Bracket System
Removable Chassis Skirt
Exhaust Gas Recirculation for an Internal Combustion Engine and Method Therefor
Mounting System for Modular Frame Components
Lnt Regeneration Strategy to Reduce Nox Spike
Devices and Methods for Reduction of Nox Emissions from Lean Burn Engines
Vehicle Battery State of Charge Indicator
System and Method for Quantizing Fuel Dilution of Engine Motor Due to Post-Injection Fueling to Regenerate an Exhaust Aftertreatment Device
Compression Ignition Engine Having Fuel Injection Devices and Processes for Promoting Cleaner Burning Lifted Flame Combustion
Frame Extender
Automated Synchronized Service Intervals for Vehicles
Integrated Automatic Manual Transmission Lever-Type Shift Selector
Method of Compression Molding Motor Vehicle Components and Parts Made Therefrom
Particulate Filter Having Expansible Capture Structure for Particulate Removal
Longitudinal Stringer Exhaust Flex Pipe Assembly
Engine Gas Temperature Reduction
Shoe for Professional Truckers
Utility Shoulder Belt
Spool Valve and Method
Cylinder Head Gasket for an Internal Combustion Engine
Diesel Particulate Filter Pulse Cleaner Flow Director System and Method
Device and System for Enabling Families to Share in Long Haul Truckers' Travels
Engine Glow Plug Diagnosis Using Crankshaft Sensor Data
System and Method for Diesel Particulate Filter Regeneration
Internal Combustion Engine Having Compressor with First and Second Tributary Inlets
Desulfation Control Strategy
Lnt-Scr System Optimized for Thermal Gradient
Algorithm Incorporating Driving Conditions into Lnt Regeneration Scheduling
Rotating Disk System for a Vehicle Door Latch Assembly
Diesel Particulate Filter Cleaning Apparatus and Method
Control Strategy for Dc Emergency Direct Current Motor for an Emergency Hydraulic Pump
Cooling Apparatus for Exhaust Gas Temperature Control Devices
System and Method for Determining Position Within or Without a Complex Polygon Geofence
Vehicle Hazard Flasher Control System
Harness Retainer Indicator
Electric Cable Organizer for a Battery Box in an Automotive Vehicle
Cam-Action Sleeve Puller
Application:
11/873,468 →
Publication:
US 2009/0102108
Multiple Height Fluid Mixer and Method of Use
Keyed/Anti-Rotation Grounding Bus Bar
Patent:
7,458,861 →
Application:
11/877,334 →
Articulating Interlocking Structural Extrusions for Recreational Vehicles and the Like
Physical Based Lnt Regeneration Strategy
Catalyst Composition and Structure for a Diesel-Fueled Autothermal Reformer Placed in and Exhaust Stream
Child Restraint Lower Anchorage for a Motor Vehicle Seat
Prioritized Recapture of Energy During Deceleration of a Dual-Hybrid Motor Vehicle
Automated No-Idle Heating and Engine Pre-Heat Using Engine Coolant
In-Cab Refrigerator Mounting and Method
Ingress/Egress Steps for a Highway Truck
Suspension Mounting Crossmember with Integrated Cab Mounts for Vehicle Having Front Multilink Suspension
Moveable Storage Assembly for Motor Vehicles
Electrical Harness Clipping Bar for Aftertreatment Device
Rotating Vehicle Console
Windshield Wiper with Scrubber Assembly
Passenger Seat Having Driver-Accessible Storage Modules
Fuel Nozzle Support Funnel
Ergonomic Handle for Fuel Cap
Exhaust Temperature Reduction Device for Aftertreatment Devices
Pre-Combustor and Large Channel Combustor System for Operation of a Fuel Reformer at Low Exhaust Temperatures
Transmission Shift Signal for Aftertreatment Device Control
Cabinet Cleat
Drive Away Axle Assembly
Battery Pack Management Strategy in a Hybrid Electric Motor Vehicle
Transit Bus Intake Air Management Box
Brake System Development Tool Having a Mechanism for Setting Different Pedal Ratios
Engine Speed Controller Having Pi Gains Set by Engine Speed and Engine Speed Error
Patent:
7,536,992 →
Application:
12/056,864 →
Independently Adjustable Chassis Skirt Mounting Assembly
Flow Regulation Mechanism for Turbocharger Compressor
Electrical System Testing Using a Wireless-Controlled Load Bank
Torque Limiting Cap for Air Conditioning Service Ports
School Bus Crossing Gate and System for Automatic Activation
Patent:
7,559,575 →
Application:
12/060,955 →
Anti-Separation Device for Use with Isolator
Method and Apparatus to Optimize Energy Efficiency of Air Compressor in Vehicle Air Brake Application
Vehicle Energy Management System
Method for on-Board Data Backup for Configurable Programmable Parameters
Oil Pan to Engine Block Attachment for Avoiding Fretting of the Oil Pan Rim
Patent:
7,597,083 →
Application:
12/184,705 →
High Pressure Oil Limit Based on Fuel Level to Protect Fuel Injectors
Service Brake Control System for Optimized Regenerative Braking of Medium or Heavy Trucks
Transmission Mount Assembly
Auxiliary Power Units for Vehicles
Tone Ring for an Anti-Lock Brake System
Engine Idle Control Using Gps Telematics
Hybrid Electric Vehicle Traction Motor Driven Power Take-Off Control System
Air Intake Plenum for Air Induction Channel
Thermal Management of Urea Dosing Components in an Engine Exhaust After-Treatment System
Nozzle Trumpet
Application:
12/341,519 →
Publication:
US 2010/0155510
Air Valve and Method of Use
Proactive Aerodynamic Truck Trailer Shroud
Preparation Method for a Partially Coated Monolith
Vehicle with a Protective Panel
System and Method for Improved Emission Control of Internal Combustion Engines Using Pulsed Fuel Flow
Programmable Can Bus to Analogue Signal Converter
Electro-Hydraulic Poppet Valve with Supply Pressure Unloading Function
Application:
12/428,004 →
Publication:
US 2010/0270487
Injection Mold Seat Riser for Modular School Bus Seats
Convertible Seating Unit
Stowable Table Unit System for a Vehicle
Nested Seating Unit
Preventing Soot Underestimation in Diesel Particulate Filters by Determining the Restriction Sensitivity of Soot
Structural Air Tank Crossmember
Method of Adhering an Object to the Exterior of a Motor Vehicle
Platform Assembly
Quick Disconnect Hitch
System and Method for Indicating Apparent Vehicle Service Brake Application Without Apparent Operation of Service Brack Actuator
Model for Inferring Temperature of Exhaust Gas at an Exhaust Manifold Using Temperature Measured at Entrance of a Diesel Oxidation Catalyst
Pneumatic Door Assist System with Lock
Interactive Parasitic Devices for Engine Performance Improvement
Motor Vehicle Braking System and Method
Preparing a Pass-Through for an Occupant Compartment - Engine Compartment Ground Block
Stackable Armored Vehicle
System and Method for Controlling Air Gap Between a Tractor and a Trailer
Scalable, Hybrid Energy Storage for Plug-in Vehicles
Vehicle Hybridization System
Oval Axle Housing and Clamp Assembly
Torque Rod Bracket Assembly
Digital Camera Rear-View System
Roof Panel with Insert
Visor Support and Method
System and Method for Exporting a Vehicle on-Board Ac Power to a Second Vehicle
Auxiliary Power Unit Diagnostic Tool
Light-Weight, Roll-Bonded Heavy Duty Truck Frame Member
Temperature Control Device
Pneumatic Suspension Spring for a Wheeled Vehicle
Method of Monitoring Hydrocarbon Levels in a Diesel Particulate Filter
Motor Vehicle with System for Conditioning Power Take-Off Enablement on an Engine Compartment Being Closed
Adaptive Egr Cooling System
Turbocharger with Integrated Centrifugal Breather
Variable Open-Closed Crankcase Breather System for Blow-by Gas
Method and Apparatus for Reducing Blow-by Coking
Exhaust Gas Cooler
Application:
12/533,410 →
Publication:
US 2011/0023840
Engine Crankcase Firing Deck Having Anti-Distortion Projections
Bridge and Pivot Foot Arrangement for Operating Engine Cylinder Valves
Strategy for Enabling Intake Air Heater to Clean Up White Smoke During Warm Engine Re-Start in Cold Weather
Application:
12/534,964 →
Publication:
US 2011/0030661
System Using Supplemental Compressor for Egr
Throttle Loss Recovery and Supercharging System for Internal Combustion Engines
Application:
12/536,549 →
Publication:
US 2011/0030641
Exhaust System for Engine Braking
Hybrid Intake System for Superatmospheric Charging of an Engine Intake Manifold Using Lowpressure Egr/Fresh Air Blending
Application:
12/539,938 →
Publication:
US 2011/0036335
Engine Exhaust System Having Filter Before Turbocharger
Supercharged Boost-Assist Engine Brake
Intake Valve Closing Hydraulic Adjuster
Method for Urea Injection Control
Application:
12/541,446 →
Publication:
US 2011/0036078
Heating Systems to Prevent Freezing of Condensation in Breather Tubes
Application:
12/541,467 →
Publication:
US 2010/0186686
Mount for Exhaust System Components
Method and Apparatus for De-Sulfurization on a Diesel Oxidation Catalyst
Post Injection Bucketing Strategy to Avoid Hardware Cavitation
Breather Air - Oil Seperator
Emg Temp Signal Model Based on Egrc Out Temp for Egr System Anti-Fouling Protection
Intake Manifold Oxygen Control
Expansion Tank for Vehicle Cooling System
Gravity-Activated Valve For Use In Supplying An Uninterrupted Supply Of Fluid
Application:
12/554,117 →
Publication:
US 2011/0056452
Rotating Vehicle Console
Motor Vehicle Battery Disconnect Circuit Having Electronic Disconnects
Leak Detection System
Method for Selecting Software and Installing Same via a Telematic Module in a Motor Vehicle
Application:
12/572,472 →
Publication:
US 2011/0083128
System and Method for Condensate Removal from Egr System
Flex Dual Stage Egr Cooling
Scr Mixer
Exhaust Gas Recirculation Cooler System
Telemetry-Based Regeneration Strategy for an Engine Exhaust After-Treatment Device
Control System for a Battery Powered Vehicle
Air Power Energy Transformation to Electrical Energy for Hybrid Electric Vehicle Applications
Fuel Injector Assembly
Application:
12/605,936 →
Publication:
US 2010/0108786
Method to Characterize and Control the Flow Rate of a Pulse Width Modulating Fuel Injector
Application:
12/607,155 →
Publication:
US 2011/0098906
Three-Way Throttle Valve
Application:
12/610,499 →
Publication:
US 2011/0100325
Forced Convection Egr Cooling System
Application:
12/610,549 →
Publication:
US 2011/0100342
High-Temperature-Flow Engine Brake with Valve Actuation
Unintended Exothermal Reactions Monitoring for Diesel After-Treatment Systems
Method of Stationary Regeneration of an Engine Exhaust Particulate Filter
Reductant Spray Injector Boss
Application:
12/611,214 →
Publication:
US 2011/0099974
Engine with Electronically Controlled Starting Method
System and Method of Controlling an Amount of Condensation in an Engine Air Intake System
Emission Control System for an Engine Having a Two-Stage Turbocharger
Exhaust Gas Recirculation Valve with Bypass Capability and Method
Application:
12/614,534 →
Publication:
US 2011/0108013
Fuel Injector Assembly
Crankcase Blow-by Gas Treatment Assembly and Method of Treating Blow-by Gas
Solenoid Control for Valve Actuation in Engine Brake
Application:
12/623,838 →
Publication:
US 2011/0120411
Low Pressure Turbine Waste Gate for Diesel Engine Having Two Stage Turbocharger
Application:
12/623,974 →
Publication:
US 2011/0120123
Urea Scr Diesel Aftertreatment System
Engine Exhaust System Having a Plurality of Diesel Particulate Filters
Egr Cooler Cleaning System and Method
System and Method for Coupled Dpf Regeneration and Lnt Denox
Cold Plate Refrigeration System Optimized For Energy Efficiency
Application:
12/640,152 →
Publication:
US 2010/0180614
Vehicle Installed Cement Mixer Control
Application:
12/642,012 →
Publication:
US 2011/0153142
Electrically Heated Diesel Oxidation Catalyst
Application:
12/643,374 →
Publication:
US 2011/0072805
Control System and Method for Limiting Engine Torque Based on Engine Oil Pressure and Engine Oil Temperature Data
Alignment Clamp
Application:
12/692,381 →
Publication:
US 2011/0181037
Adaptive Desulfation Control Algorithm
Application:
12/696,685 →
Publication:
US 2011/0185708
Lnt Desulfation Strategy with Reformer Temperature Management
Engine with Remote Oil Fill Assembly
Application:
12/702,021 →
Publication:
US 2011/0192843
Fuel Injector Nozzle
Compressed Air Intake Engine Inlet Booster
Application:
12/703,546 →
Publication:
US 2011/0083646
System for Disabling Diesel Particulate Filter Regeneration During Electric Operation
Engine Intake Air Compressor and Method
Method, System and Apparatus for Liquid Injection into a Gas System
Method for Automatically Determining Engine Oil Change Frequency Based on Fuel Injected
Exhaust Valve Actuation System for Diesel Particulate Filter Regeneration
Application:
12/712,282 →
Publication:
US 2011/0203258
Motor Vehicle Fuel System Having Multiple Fuel Tanks
Methods and Circuits for Controlling a Battery Disconnect Switch
System and Method for Indirect Indication of Tire Pressure Loss
Connector Position Assurance Lock
Hybrid High Voltage Isolation Contactor Control
Application:
12/717,600 →
Publication:
US 2011/0218698
Method and Apparatus for Gaseous Mixing in a Diesel Exhaust System
Application:
12/723,244 →
Publication:
US 2011/0219745
Method for Diesel Particulate Filter Regeneration in a Vehicle Equipped with a Hybrid Engine Background of the Invention
Exhaust Cooling Module for SCR Catalysts
Diesel Particulate Filter Cleaning Apparatus and Method
Method for Operating an Exhaust Valve for Diesel Particulate Filter Regeneration
Application:
12/788,379 →
Publication:
US 2011/0289902
Quick Connect Valve with Integral Backflow Valve
Battery Back Up for Electronic Modules
Direct Side Pour Riser Sleeve
Application:
12/818,699 →
Publication:
US 2011/0309115
Fuel Injector Clamp
Method for Injecting Ammonia into an Exhaust Gas Stream
Method for Heating Solid Ammonia to Release Gaseous Ammonia in Exhaust Aftertreatment System
Application:
12/836,202 →
Publication:
US 2012/0011830
Method Of Compression Molding Motor Vehicle Components And Parts Made Therefrom
Application:
12/836,830 →
Publication:
US 2010/0276843
Diesel Engine Exhaust After-Treatment Operator Interface Algorithm
Slidably Adjustable Fifth Wheel Hitch Assembly for a Vehicle and Control System for the Same
Application:
12/883,614 →
Publication:
US 2011/0071736
Slidably Adjustable Fifth Wheel Hitch Assembly for a Vehicle and Control System for the Same
Slidably Adjustable Fifth Wheel Hitch Assembly for a Vehicle and Control System for the Same
Gearless Offset Steering Shaft Coupling
Application:
12/902,400 →
Publication:
US 2012/0085187
Boundary Edge Filter of a Unit Fuel Injector
Diesel fuel injector circlip and ferrule ring removing tool
Multiple Battery System of a Motor Vehicle
Adaptive Control Strategy
Dosing Manifold Assembly
Engine Starting Control for Hybrid Electric Powertrains
Strategy For Control Of Recirculated Exhaust Gas To Null Turbocharger Boost Error
Application:
12/966,609 →
Publication:
US 2011/0079008
System And Method For Inhibiting Regeneration Of A Diesel Particulate Filter
Turbine Inlet Flow Modulator
Application:
12/985,640 →
Publication:
US 2011/0173973
Electric-Actuated Control Valve of a Unit Fuel Injector
High Pressure Fuel Pump Piston Assembly
Application:
13/011,594 →
Publication:
US 2012/0189465
Device and Method for Storage Tank Restraint on a Vehicle
Application:
13/014,472 →
Publication:
US 2011/0197423
Disassembly Station
Cone Nut Inside Diameter Cleaning
Application:
13/018,461 →
Publication:
US 2011/0220150
Windshield Wiper with Vibration Actuator
Soot Resistant Diesel Fuel Reformer for Diesel Engine Emissions Aftertreatment
Engine Exhaust Gas Particulate Filter having Helically Configured Cells
Application:
13/038,909 →
Publication:
US 2012/0222412
Process and System for Disassembling Fuel Injector
Application:
13/041,514 →
Publication:
US 2012/0054997
Rail Connection Restoration and Method for Cleaning Fuel Injector Without Disassembly
Application:
13/044,298 →
Publication:
US 2012/0055514
Torque Limiting Engine Rotation Tool
Pressure Swirl Atomizer with Closure Assist
Pressure Swirl Atomizer with Reduced Volume Swirl Chamber
Application:
13/087,758 →
Publication:
US 2011/0253808
Pressure Swirl Atomizer with Swirl-Assisting Configuration
Application:
13/087,840 →
Publication:
US 2011/0253809
Vehicle Armor
Automatically Adjusting Side Mirror Assembly for a Vehicle
Auxiliary Power Unit Having Self-Contained Electric Power Distribution
Application:
13/121,380 →
Publication:
US 2012/0031687
Control System for Equipment on a Vehicle with a Hybrid-Electric Powertrain
Application:
13/128,817 →
Publication:
US 2011/0231045
Control System for Equipment on a Vehicle with a Hybrid-Electric Powertrain
Variable Speed PTO & Hydraulic Flow Control for Body Equipment Integrated with a Hybrid Electric Powertrain
Application:
13/129,057 →
Publication:
US 2011/0231046
Internal Combustion Engine Having Compressor With First And Second Tributary Inlets
Application:
13/153,631 →
Publication:
US 2011/0232279
Tool and Method for Draining and Refilling a Cooling System
Sunshade Assembly with Light
Application:
13/165,969 →
Publication:
US 2012/0326465
Lighting Assembly of a Vehicle
Application:
13/166,233 →
Publication:
US 2012/0327675
Mirror Assembly
Dual Mode Fuel Injector
Application:
13/210,981 →
Publication:
US 2012/0205469
Stackable Armored Vehicle
Stackable Armored Vehicle
Application:
13/241,632 →
Publication:
US 2012/0011995
Monitor of Ammonia in Dosing System
Application:
13/273,455 →
Publication:
US 2013/0091827
Chassis Frame of a Vehicle
Patent:
8,424,913 →
Application:
13/332,722 →
Steering Column Adjustment
Application:
13/347,844 →
Publication:
US 2013/0174684
Insulated Main NH3 Cartridge System with Separate Start-Up Unit
Battery Connector and Method of Making a Battery Connector
Application:
13/394,403 →
Publication:
US 2012/0178286
In-Flow Air Injection Housing
Application:
13/416,346 →
Publication:
US 2012/0227399
Tamper Resistant Battery Compartment
Light-Weight, Roll-Bonded Heavy Duty Truck Frame Member
Fan Assembly and Gap Tool
High-Pressure Unit Fuel Injector
Application:
13/497,049 →
Publication:
US 2012/0180761
Nozzle and Needle of a High-Pressure Unit Fuel Injector
Application:
13/497,050 →
Publication:
US 2012/0181351
Engine Brake Camshaft Lobe Lubrication Method
Application:
13/498,138 →
Publication:
US 2012/0174887
Control System for Equipment on a Vehicle with a Hybrid-Electric Powertrain
Application:
13/505,312 →
Publication:
US 2012/0265388
Control System for Equipment on a Vehicle with a Hybrid-Electric Powertrain
Application:
13/505,477 →
Publication:
US 2012/0290151
Control System for Equipment on a Vehicle with a Hybrid-Electric Powertrain
Application:
13/505,486 →
Publication:
US 2012/0239226
Control System for Equipment on a Vehicle with a Hybrid-Electric Powertrain
Vehicle with Particulate Resistant Windshield
Application:
13/508,889 →
Publication:
US 2012/0247503
Control System for Pto Equipment on a Vehicle with a Hybrid-Electric Drivetrain
Status Indicator for Amonia Cartridge
Interior of a Truck Door Panel
Patent:
409,965 →
Application:
29/080,492 →
Truck Grille
Patent:
400,836 →
Application:
29/080,495 →
Exterior of a Truck Cab
Patent:
403,620 →
Application:
29/080,496 →
Low Forward Entry Truck Cab Including Attached Steps and Fenders
Patent:
411,816 →
Application:
29/080,497 →
Exterior of a Grille and Grille Insert for a Truck
Patent:
403,285 →
Application:
29/080,499 →
Exterior of a Vehicle Hood
Patent:
403,637 →
Application:
29/080,683 →
Vehicle Instrument Panel
Patent:
413,095 →
Application:
29/080,685 →
Truck Vehicle Hood
Patent:
426,800 →
Application:
29/112,382 →
Panel for an engine tunnel console of a mobile vehicle
Patent:
467,534 →
Application:
29/127,151 →
Truck vehicle body
Patent:
445,361 →
Application:
29/130,658 →
Cab for a truck vehicle
Patent:
444,737 →
Application:
29/130,659 →
Hood for a truck vehicle
Patent:
445,384 →
Application:
29/130,660 →
Grille of a truck vehicle
Patent:
447,099 →
Application:
29/130,662 →
Bumper for a truck vehicle
Patent:
445,073 →
Application:
29/130,832 →
Grille of a Truck Vehicle
Patent:
455,381 →
Application:
29/145,246 →
Cab and Hood Assembly of a Truck Vehicle
Patent:
466,450 →
Application:
29/146,378 →
Cab of a Truck Vehicle
Patent:
458,875 →
Application:
29/147,663 →
Bumper of a Truck Vehicle
Patent:
458,565 →
Application:
29/147,664 →
Hood of a Truck Vehicle
Patent:
458,197 →
Application:
29/147,700 →
Mirror View Assembly
Patent:
462,305 →
Application:
29/150,984 →
Ramp Block
Patent:
511,962 →
Application:
29/223,485 →
Bumper of a Truck Vehicle
Patent:
521,912 →
Application:
29/232,372 →
Modesty Panel of a Truck Vehicle
Patent:
522,427 →
Application:
29/232,376 →
Air Deflector of a Truck Vehicle
Patent:
518,426 →
Application:
29/233,102 →
Instrument Panel of a Truck Vehicle
Patent:
514,995 →
Application:
29/233,179 →
Hood of a Bus Vehicle
Patent:
537,761 →
Application:
29/240,419 →
Lower Console of a Truck Vehicle
Patent:
525,933 →
Application:
29/244,699 →
Crescent Couch and Bunk of a Truck Vehicle
Patent:
556,467 →
Application:
29/248,628 →
Front Bumper Valence of a Truck Vehicle
Patent:
540,224 →
Application:
29/253,443 →
Rear Roll Pan of a Truck Vehicle
Patent:
556,661 →
Application:
29/255,867 →
Combined Hood Top and Fender Unit of a Truck
Patent:
556,654 →
Application:
29/256,262 →
Left Side Grille of a Truck Vehicle
Patent:
566,015 →
Application:
29/267,866 →
Truck Vehicle
Patent:
566,009 →
Application:
29/267,867 →
Right side grille of a truck vehicle
Patent:
557,183 →
Application:
29/267,891 →
Hood Side of a Truck Vehicle
Patent:
564,427 →
Application:
29/267,892 →
Front Bumper of a Truck Vehicle
Patent:
556,649 →
Application:
29/267,893 →
Hood Top of a Truck Vehicle
Patent:
557,186 →
Application:
29/267,894 →
Shoe
Patent:
603,587 →
Application:
29/280,198 →
Utility Shoulder Belt
Patent:
558,448 →
Application:
29/280,264 →
Chassis Skirt System of a Truck Vehicle
Patent:
579,843 →
Application:
29/295,015 →
Fender Extension of a Truck Vehicle
Patent:
615,472 →
Application:
29/296,220 →
Grille of a Truck Vehicle
Patent:
592,561 →
Application:
29/296,546 →
Air Cleaner Light Bar of a Truck Vehicle
Patent:
571,029 →
Application:
29/296,550 →
Headlight of a Truck Vehicle
Patent:
592,324 →
Application:
29/296,551 →
Air Cleaner of a Truck Vehicle
Patent:
622,371 →
Application:
29/296,555 →
Above Airline Storage Unit of a Truck Vehicle
Patent:
585,812 →
Application:
29/305,597 →
Skirt of a Truck Vehicle
Patent:
652,774 →
Application:
29/367,773 →
Grille of a Truck Vehicle
Patent:
637,530 →
Application:
29/367,777 →
Bumper of a Truck Vehicle
Patent:
634,246 →
Application:
29/367,781 →
Truck Cab
Patent:
634,244 →
Application:
29/367,783 →
Cab Body of a Step Van
Patent:
642,961 →
Application:
29/375,609 →
Bumper of a Truck Vehicle
Patent:
645,799 →
Application:
29/384,279 →
Fender Extension of a Truck Vehicle
Patent:
641,298 →
Application:
29/384,285 →
Grille of a Truck Vehicle
Patent:
645,797 →
Application:
29/384,286 →
Headlight Bezel of a Truck Vehicle
Patent:
640,826 →
Application:
29/384,288 →
Hood of a Truck Vehicle
Patent:
645,801 →
Application:
29/384,291 →
Truck Vehicle
Patent:
645,380 →
Application:
29/384,294 →
Cowl Panel of a Truck Vehicle
Patent:
653,186 →
Application:
29/384,952 →
Aerodynamic Bumper of a Truck Vehicle
Patent:
647,012 →
Application:
29/386,190 →
Fender Flare of a Truck Vehicle
Patent:
644,972 →
Application:
29/390,591 →
Fender Flare of a Truck Vehicle
Patent:
644,581 →
Application:
29/390,592 →
Front Cap of a Recreational Vehicle
Patent:
670,608 →
Application:
29/396,043 →
Front Cap of a Recreational Vehicle
Patent:
670,609 →
Application:
29/396,062 →
Rear Cap of a Recreational Vehicle
Patent:
670,610 →
Application:
29/396,065 →
Rear Cap of a Recreational Vehicle
Patent:
670,611 →
Application:
29/396,079 →
Instrument Panel of a Recreational Vehicle
Patent:
654,837 →
Application:
29/396,085 →
Grille of a Recreational Vehicle
Patent:
673,486 →
Application:
29/397,694 →
Headlight Bezel of a Recreational Vehicle
Patent:
661,011 →
Application:
29/397,695 →
Front Cap of a Recreational Vehicle
Patent:
670,612 →
Application:
29/397,713 →
Rear Cap of a Recreational Vehicle
Patent:
670,613 →
Application:
29/397,716 →
A Set of Rear Taillight Covers for a Recreational Vehicle
Patent:
677,424 →
Application:
29/397,721 →
Grille of a Recreational Vehicle
Patent:
673,089 →
Application:
29/397,732 →
Headlight Bezel of a Recreational Vehicle
Patent:
661,012 →
Application:
29/397,737 →
Front Cap of a Recreational Vehicle
Patent:
670,614 →
Application:
29/397,740 →
Rear Cap of a Recreational Vehicle
Patent:
670,615 →
Application:
29/397,746 →
A Set of Rear Taillight Covers for a Recreational Vehicle
Patent:
677,425 →
Application:
29/397,756 →
Instrument Panel of a Recreational Vehicle
Patent:
656,075 →
Application:
29/397,826 →
Injector Fluid Return with Swirl Assist
Application:
61/325,421 →
Nitrous Oxide Abatement from Selective Catalytic Reduction Systems
Application:
61/521,419 →
Low Eddy Current Intensifier Control Valve Design
Application:
61/530,502 →
Cold Start Startup Unit For DEF Systems
Application:
61/531,368 →
Solenoid Termination Methods for G3000M Diesel Fuel Injector
Application:
61/532,134 →
Selective Use of Lean NOx Trap
Application:
61/535,436 →
Hydraulic Powered Park Brake System
Application:
61/535,537 →
Soot Reduction in Diesel Engines
Application:
61/539,766 →
Implementation of three-way catalyst for NOx reduction
Application:
61/540,073 →
Enhance the NOx reduction over a three way catalyst by the use of hydro carbons in the exhaust
Application:
61/557,077 →
NOx reduction across the overall aftertreatment system by introducing three way catalyst formulation on a Diesel Particulate Filter
Application:
61/558,542 →
Two way pressure balanced valve to control needle motion within a fuel injector
Application:
61/567,197 →
Use of Soot Accumulation Model for Setpoint Modification
Application:
61/593,023 →
NOx Control Using Intake Manifold Oxygen Concentration Setpoints
Application:
61/593,031 →
Setpoint Bank Control Architecture
Application:
61/593,045 →
Control of Turbocharger Using Exhaust Manifold Oxygen Concentration
Application:
61/593,053 →
Coordinated Fuel and Intake Manifold Oxygen Concentration Setpoint Modification Via Charge Utilization Concept
Application:
61/593,059 →
Intra-Tubular Fuel Vaporizer Catalyst + Fuel Reformer Design for Continuous Operation of a Lean NOx Catalyst
Application:
61/601,725 →
Fuel Injector Nozzle
Application:
61/610,666 →
Fuel Injector Needle Sleeve
Application:
61/611,995 →
Methods to control the amount of power developed during engine braking
Application:
61/637,881 →
Low Pressure Turbo Compressor By-pass During a Transient Event
Application:
61/649,773 →
Related Assignments
(11)
Other recorded transfers of the patents in this record — the chain of ownership.
Release of Security Interest
Mar 12, 2015
From: JPMORGAN CHASE BANK, N.A.
To: INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY
Reel/Frame 035150/0962 →
Release of Security Interest
Mar 17, 2015
From: JPMORGAN CHASE BANK, N.A.
To: INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY
Reel/Frame 035178/0872 →
Assignment of Assignor's Interest
Apr 8, 2015
From: INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY
To: INVENSENSE, INC.
Reel/Frame 035359/0144 →
Security Agreement
Sep 15, 2015
From: NAVISTAR INTERNATIONAL CORPORATION; INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC; INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC
To: JPMORGAN CHASE BANK N.A., AS COLLATERAL AGENT
Reel/Frame 036616/0243 →
Security Interest
Nov 10, 2017
From: NAVISTAR INTERNATIONAL CORPORATION; NAVISTAR, INC.
To: JPMORGAN CHASE BANK, N.A., AS COLLATERAL AGENT
Reel/Frame 044418/0310 →
Release of Security Interest
Nov 10, 2017
From: JPMORGAN CHASE BANK, N.A., AS COLLATERAL AGENT
To: NAVISTAR INTERNATIONAL CORPORATION; INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC; INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC
Reel/Frame 044780/0456 →
Security Interest
Apr 23, 2020
From: INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC; INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC; NAVISTAR, INC. (F/K/A INTERNATIONAL TRUCK AND ENGINE CORPORATION)
To: JPMORGAN CHASE BANK, N.A., AS ADMINISTRATIVE AGENT
Reel/Frame 052483/0742 →
Security Interest
Apr 27, 2020
From: NAVISTAR INTERNATIONAL CORPORATION; INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC; INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC; NAVISTAR, INC. (F/K/A INTERNATIONAL TRUCK AND ENGINE CORPORATION)
To: THE BANK OF NEW YORK MELLON TRUST COMPANY, N.A., AS COLLATERAL AGENT
Reel/Frame 053545/0443 →
Corrective Assignment to Correct the Conveying Party Data Previously Recorded at Reel: 052483 Frame: 0742. Assignor(S) Hereby Confirms the Security Interest..
Apr 27, 2020
From: NAVISTAR INTERNATIONAL CORPORATION; INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC; INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC; NAVISTAR, INC. (F/K/A INTERNATIONAL TRUCK AND ENGINE CORPORATION)
To: JPMORGAN CHASE BANK, N.A., AS ADMINISTRATIVE AGENT
Reel/Frame 053457/0001 →
Release of Security Interest
Jul 2, 2021
From: JPMORGAN CHASE BANK, N.A., AS ADMINISTRATIVE AGENT
To: INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC; NAVISTAR, INC. (F/KA/ INTERNATIONAL TRUCK AND ENGINE CORPORATION); INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC
Reel/Frame 056757/0136 →
Release of Security Interest Recorded at Reel/Frame 53545/443
Jul 15, 2021
From: THE BANK OF NEW YORK MELLON TRUST COMPANY, N.A.
To: NAVISTAR INTERNATIONAL CORPORATION; INTERNATIONAL TRUCK INTELLECTUAL PROPERTY COMPANY, LLC; INTERNATIONAL ENGINE INTELLECTUAL PROPERTY COMPANY, LLC; NAVISTAR, INC.
Reel/Frame 057441/0404 →